Engineering Data to be Provided Prior to Scheduled Determination Dates Sample Clauses

Engineering Data to be Provided Prior to Scheduled Determination Dates. On or before March 1 of each year for the Determination Date of May 1, Borrower shall deliver to Administrative Agent a Reserve Report and the other data specified in Section 7.15. Lenders shall then determine the Borrowing Base for the six (6) month period commencing May 1, which determination shall be made in accordance with the standards specified in Section 4.1 and the procedures set forth in Section 4.5. On or before September 1 of each year for the Determination Date of November 1, Borrower shall deliver to Administrative Agent a Reserve Report and the other data specified in Section 7.15. Lenders shall then determine the Borrowing Base for the six (6) month period commencing November 1, which determination shall be made in accordance with the standards specified in Section 4.1 and the procedures set forth in Section 4.5.
AutoNDA by SimpleDocs
Engineering Data to be Provided Prior to Scheduled Determination Dates. (a) On or before February 15 of each year for the Determination Date of April 1, the Borrower shall deliver to the Agent a Reserve Report. Bank shall then determine the Borrowing Base for the six (6) month period commencing April 1. (b) On or before August 15 of each year for the Determination Date of October 1, the Borrower shall deliver to the Agent such information, reports and data pertaining to Mineral Interests of the Borrower in all of its oil and gas properties, including those oil and gas properties which constitute the Mortgaged Properties, as the Agent may reasonably request. Such information shall (i) set forth the historical production data of the oil and gas reserves included in such properties, (ii) set forth for each property prices received for production, lease operating expenses, capital expenditures, gross revenues, net revenues, taxes and such other information as Bank may deem necessary or appropriate, (iii) set forth for each property any changes since the date of most recent Reserve Report, if any, in its working interest or net revenue interest therein, and (iv) be accompanied by a certification of the Borrower to the effect that no material adverse changes have occurred since the date of the last Reserve Report except those which have previously been disclosed to the Agent in writing. The Lenders shall then determine the Borrowing Base for the next six (6) month period.
Engineering Data to be Provided Prior to Scheduled Determination Dates. On or before March 1 of each year for the Determination Date of May 1, Borrower shall deliver to Administrative Agent a Reserve Report and the other data specified in Section 7.15. Lenders shall then determine the Conforming Borrowing Base or the Borrowing Base, as applicable, for the six (6) month period commencing May 1, which determination shall be made in accordance with the standards specified in Section 4.1 and the procedures set forth in Section 4.5. On or before September 1 of each year for the Determination Date of November 1 (or in the case of the Determination Date to occur on November 1, 2012, on or before October 15, 2012), Borrower shall deliver to Administrative Agent a Reserve Report and the other data specified in Section 7.15. Lenders shall then determine the Conforming Borrowing Base or the Borrowing Base, as applicable, for the six (6) month period commencing November 1, which determination shall be made in accordance with the standards specified in Section 4.1 and the procedures set forth in Section 4.5. MRC Energy Company Credit Agreement
Engineering Data to be Provided Prior to Scheduled Determination Dates. (a) On or before April 1 of each year for the Determination Date of May 1, Borrowers shall deliver to Administrative Agent a Reserve Report prepared by an independent petroleum consulting firm acceptable to Administrative Agent and the other data specified in Section 7.1F hereof. Administrative Agent shall then determine the Borrowing Base for the six (6) month period commencing May 1. (b) On or before October 1 of each year for the Determination Date of November 1, Borrowers shall deliver to Administrative Agent a Reserve Report prepared by their in-house engineers and the other data specified in Section 7.1 F. hereof. Administrative Agent shall then determine the Borrowing Base for the six-month period commencing November 1.
Engineering Data to be Provided Prior to Scheduled Determination Dates. On or before March 1 of each year for the Determination Date of May 1, Borrower shall deliver to Administrative Agent a Reserve Report and the other data specified in Section 7.15. Lenders shall then determine the Conforming Borrowing Base or the Borrowing Base, as applicable, for the six (6) month period commencing May 1, which determination shall be made in accordance with the standards specified in Section 4.1 and the procedures set forth in Section 4.5. On or before September 1 of each year for the Determination Date of November 1, Borrower shall deliver to Administrative Agent a Reserve Report and the other data specified in Section 7.16. Lenders shall then determine the Conforming Borrowing Base or the Borrowing Base, as applicable, for the six (6) month period commencing November 1, which determination shall be made in accordance with the standards specified in Section 4.1 and the procedures set forth in Section 4.5.

Related to Engineering Data to be Provided Prior to Scheduled Determination Dates

  • NASPO ValuePoint Summary and Detailed Usage Reports In addition to other reports that may be required by this solicitation, the Contractor shall provide the following NASPO ValuePoint reports.

  • Order to Stop Work The Chief Procurement Officer, may, by written order to Contractor at any time, and without notice to any surety, require Contractor to stop all or any part of the work called for by this contract. This order shall be for a specified period not exceeding 90 days after the order is delivered to Contractor, unless the parties agree to any further period. Any such order shall be identified specifically as a stop work order issued pursuant to this clause. Upon receipt of such an order, Contractor shall forthwith comply with its terms and take all reasonable steps to minimize the occurrence of costs allocable to the work covered by the order during the period of work stoppage. Before the stop work order expires, or within any further period to which the parties shall have agreed, the Chief Procurement Officer shall either: i. cancel the stop work order; or, ii. terminate the work covered by such order as provided in the Termination for Default clause or the Termination for Convenience clause of this contract.

  • Detailed Description of Services / Statement of Work Describe fully the services that Contractor will provide, or add and attach Exhibit B to this Agreement.

  • DISTRIBUTION OF CONTRACTOR PRICE LIST AND CONTRACT APPENDICES Contractor shall provide Authorized Users with electronic copies of the Contract, including price lists and Appendices, upon request. Contract Updates will be handled as provided in Appendix C – Contract Modification Procedures.

  • Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.

  • Modifications and Updates to the Wire Center List and Subsequent Transition Periods 5.4.6.1 In the event AT&T identifies additional wire centers that meet the criteria set forth in Sections 5.4.2.1 or 5.4.2.2 above, but that were not included in the Master List of Unimpaired Wire Centers or AT&T’s List of Unimpaired Wire Centers, AT&T shall include such additional wire centers in a CNL. Each such list of additional wire centers shall be considered a Subsequent Wire Center List. AT&T will follow any limitations on the frequency with which it may issue such lists and notification procedures set forth in applicable Commission orders. 5.4.6.2 TWTC shall have thirty (30) business days to dispute the additional wire centers listed on AT&T’s CNL. Absent such dispute, effective thirty (30) business days after the date of a AT&T CNL providing a Subsequent Wire Center List, AT&T shall not be required to provide DS1 and DS3 Dedicated Transport, as applicable, in such additional wire center(s), except pursuant to the self-certification process as set forth in Section 1.9.1 of this Attachment. 5.4.6.3 For purposes of Section 5.4.6.1 above, AT&T shall make available DS1 and DS3 Dedicated Transport that were in service for TWTC in a wire center on the Subsequent Wire Center List as of the thirtieth (30th) business day after the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Embedded Base) until one hundred eighty (180) days after the thirtieth (30th) business day Version: 4Q06 Standard ICA 11/30/06 from the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Transition Period). 5.4.6.4 The rates set forth in Exhibit B shall apply to the Subsequent Embedded Base during the Subsequent Transition Period. 5.4.6.5 No later than one hundred eighty (180) days from AT&T’s CNL identifying the Subsequent Wire Center List, TWTC shall submit an LSR(s) or spreadsheet(s) as applicable, identifying the Subsequent Embedded Base of circuits to be disconnected or converted to other AT&T services. 5.4.6.5.1 In the case of disconnection, the applicable disconnect charges set forth in this Agreement shall apply. 5.4.6.5.2 If TWTC chooses to convert DS1 and/or DS3 Dedicated Transport to special access circuits in existence as of the Effective Date of this Agreement, AT&T will include such DS1 and/or DS3 Dedicated Transport within TWTC’s total special access circuits, and apply any discounts to which TWTC is entitled from the transition period of 3/11/2006 to the conversion date. Conversions will be subject to the switch-as-is charge set forth in Exhibit A to this Attachment 2. 5.4.6.5.3 AT&T shall not impose disconnect or nonrecurring installation charges when transitioning the Subsequent Embedded Base of DS1 and DS3 Dedicated Transport in existence as of the Effective Date of this Agreement. 5.4.6.6 If TWTC fails to submit the LSR(s) or spreadsheet(s) for all of its Subsequent Embedded Base by one hundred eighty (180) days after the date of AT&T’s CNL identifying the Subsequent Wire Center List, AT&T will identify TWTC’s remaining Subsequent Embedded Base, if any, and will transition such circuits to the equivalent tariffed AT&T service(s), or in the case of Georgia, to the equivalent 271 service(s) set forth in Exhibit 1. In the states of Florida, Kentucky, Mississippi and South Carolina, those circuits identified and transitioned by AT&T shall be subject to the applicable disconnect charges as set forth in this Agreement and the full nonrecurring charges for installation of the equivalent tariffed AT&T service as set forth in AT&T’s tariffs. In the states of Alabama, Georgia, North Carolina and Tennessee, those circuits identified and transitioned by AT&T shall be subject to the applicable switch-as-is rates set forth in Exhibit A of Attachment

  • Contract Schedule The information set forth in the Contract Schedule is true and correct.

  • PREVAILING WAGE RATES - PUBLIC WORKS AND BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor Law, the following shall apply:

  • Contract Revisions Notwithstanding Contract Exhibit C, Special Contract Conditions section 6.9, the following types of revisions can be made to the Contract without a formal Contract amendment, upon written notice: Revisions by the Contractor: 1) Contractor’s Information and Contacts 2) Contractor’s Contract Manager Revisions by the Department: 1) Department’s Contract Manager 2) Department’s Quarterly Sales Report (Contract Exhibit J) 3) Contractor Performance Survey (Contract Exhibit I) Contract Exhibit C, Special Contract Conditions section 6.9, applies to all other modifications to the Contract.

  • Annual Compliance Statements The Master Servicer, the Special Servicer, the Certificate Administrator, the Custodian and, if it has made an Advance during the applicable calendar year, the Trustee shall furnish (and each of the Master Servicer, the Special Servicer, the Custodian and the Certificate Administrator (i) with respect to any Additional Servicer of such party that is a Mortgage Loan Seller Sub-Servicer, shall use commercially reasonable efforts to cause such Additional Servicer to furnish, and (ii) with respect to any other Additional Servicer of such party (other than any party to this Agreement), shall cause such Additional Servicer to furnish) (each such Additional Servicer and each of the Master Servicer, the Special Servicer, the Custodian, the Certificate Administrator and the Trustee (if applicable), a “Certifying Servicer”) to the Certificate Administrator, the Serviced Companion Loan Holders (or, in the case of a Serviced Companion Loan that is part of an Other Securitization Trust, the applicable Other Depositor and Other Exchange Act Reporting Party), the Operating Advisor (only in the case of an Officer’s Certificate furnished by the Special Servicer and after the occurrence and during the continuance of a Control Termination Event) and the Depositor on or before March 1 of each year, commencing in March 2017, an Officer’s Certificate (together with a copy thereof in XXXXX compatible format, or in such other format as otherwise agreed upon by the Depositor, the Certificate Administrator, the applicable Other Depositor, the applicable Other Exchange Act Reporting Party and the applicable Certifying Servicer) stating, as to the signer thereof, that (A) a review of such Certifying Servicer’s activities during the preceding calendar year or portion thereof and of such Certifying Servicer’s performance under this Agreement, or the applicable Sub-Servicing Agreement or primary servicing agreement in the case of an Additional Servicer, has been made under such officer’s supervision and (B) to the best of such officer’s knowledge, based on such review, such Certifying Servicer has fulfilled all its obligations under this Agreement, or the applicable Sub-Servicing Agreement or primary servicing agreement in the case of an Additional Servicer, in all material respects throughout such year or portion thereof, or, if there has been a failure to fulfill any such obligation in any material respect, specifying each such failure known to such officer and the nature and status thereof. The Master Servicer and the Special Servicer shall, and the Master Servicer and the Special Servicer shall cause (or, in the case of an Additional Servicer that is a Mortgage Loan Seller Sub-Servicer, shall use its commercially reasonable efforts to cause) each Additional Servicer hired by it to, forward a copy of each such statement to, prior to the occurrence and continuance of a Consultation Termination Event, the Controlling Class Representative and, for posting to the Rule 17g-5 Information Provider’s Website pursuant to Section 12.13, the Rule 17g-5 Information Provider. Promptly after receipt of each such Officer’s Certificate, the Depositor (and, in the case of a Serviced Companion Loan that is part of an Other Securitization Trust, the applicable Other Depositor and Other Exchange Act Reporting Party) may review each such Officer’s Certificate and, if applicable, consult with the Certifying Servicer, as applicable, as to the nature of any failures by such Certifying Servicer, respectively, or any related Additional Servicer with which the Master Servicer or the Special Servicer, as applicable, has entered into a servicing relationship with respect to the Mortgage Loans or the Companion Loans in the fulfillment of any Certifying Servicer’s obligations hereunder or under the applicable sub-servicing or primary servicing agreement. The obligations of each Certifying Servicer under this Section apply to each Certifying Servicer that serviced a Mortgage Loan or Companion Loan during the applicable period, whether or not the Certifying Servicer is acting in such capacity at the time such Officer’s Certificate is required to be delivered. With respect to each Outside Serviced Mortgage Loan serviced under the applicable Outside Servicing Agreement, the Certificate Administrator shall request, and upon receipt deliver to the Depositor, from a “Servicing Officer” or “Responsible Officer” (as such terms are defined in the applicable Outside Servicing Agreement), as applicable, of the related Outside Servicer, Outside Special Servicer, Outside Custodian, Outside Trustee and Outside Paying Agent or Outside Certificate Administrator an Officer’s Certificate in form and substance similar to the Officer’s Certificate described in this Section or such other form as is set forth in the Outside Servicing Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!