Equipment in Good Working Order Sample Clauses

Equipment in Good Working Order. Customer shall be responsible for delivering the Equipment to the Facility in good working order and suitable for use in the Facility. Customer shall be responsible for any and all costs associated with the troubleshooting and repair of Equipment received in non-working order, including parts and labor at APLD’s then-current rates. APLD is not responsible in any way for installation delays or loss of profits as a result of Equipment deemed not to be in good working order upon arrival at Facility.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Equipment in Good Working Order. Customer shall be responsible for delivering all Equipment that is not Acquired Hardware to the Facility and such Equipment shall be in good working order and suitable for use in the Facility. Customer is responsible for all risk of loss or damage to the prior to Compute North receiving the Equipment at the Facility, regardless of whether such Equipment is delivered by the Customer or Acquired Hardware. Customer shall be responsible for all costs associated with the troubleshooting and repair of Equipment received in non-working order, including parts and labor at Compute North’s then-current rates. Compute North is not responsible in any way for installation delays or losses as a result of Equipment not in good working order upon arrival at Facility.
Sample 1Sample 2Sample 3See All (4)
Equipment in Good Working Order. BMS represents and warrants that all Bitcoin Miners and PDUs delivered to Stronghold under the Agreement are functioning properly and suitable for use at the Mining Facility. To the extent that any Bitcoin Miner or PDU is deemed to be malfunctioning because that Bitcoin Miner or PDU fails to perform properly (“Nonconforming”), BMS may direct Stronghold to attempt to repair that Nonconforming Bitcoin Miner or PDU with all spare parts to be provided by BMS or may replace that Nonconforming Bitcoin Miner or PDU with a Replacement Bitcoin Miner or PDU provided at BMS’s sole cost and expense. It is understood that BMS is responsible for any costs associated with the troubleshooting and repair of Nonconforming Bitcoin Miners and PDUs including labor, parts and replacement of Nonconforming Bitcoin Miners or PDUs. Stronghold is not responsible in any way for installation delays or loss of profits as a result of Nonconforming Bitcoin Miners or PDUs. Once the Bitcoin Miners and PDUs are delivered by BMS to Stronghold, confirmed by both Parties hereto to be in good working order, and installed and operational, Stronghold shall ensure the ongoing services as stated in this Agreement. For the avoidance of doubt, this provision shall not apply in the event any defect and/or unsuitability of use of the Bitcoin Miners or PDUs is caused by the gross negligence or willful misconduct of Stronghold.
Sample 1Sample 2
Equipment in Good Working Order. For new Mining Equipment, a manufacturer warranty may be provided. Blockware is not responsible for arranging return or replacement of units, however, may arrange for return or replacement depending on the circumstances on a case by case basis. For used Mining Equipment, no warranty will be provided. Blockware will use reasonable efforts to screen and test the Mining Equipment but is not responsible for the working condition of the Mining Equipment. Customer understands and agrees that Customer may be responsible for any costs associated with the troubleshooting and repair of Mining Equipment, including labor and parts, or the return or replacement of Mining Equipment. Blockware is not responsible in any way for installation delays or loss of profits as a result of Mining Equipment deemed not to be in good working order at the Facility.
Sample 1
Equipment in Good Working Order. Lessee acknowledges as between Lessor and the Lessee, that the Lessee has fully inspected the Equipment and that Lessee is satisfied with and has accepted the condition of the Equipment. Lessee agrees that the Equipment and each Part thereof is of a design, size, quality, and capacity required by Lessee and is suitable for conducting its operations in accordance with Applicable Law. The taking of possession of the Equipment by the Lessee shall be conclusive evidence that the Equipment is in good working order and condition.
Sample 1
Equipment in Good Working Order. Except with respect to Acquired Hardware, Customer shall be responsible for delivering the Equipment to the Facility in good working order and suitable for use in the Facility. Customer shall be responsible for any and all costs associated with the troubleshooting and repair of Equipment received in non-working order, including parts and labor at Trinity Mining Technologies 's then-current rates. Trinity Mining Technologies is not responsible in any way for installation delays or loss of profits as a result of Equipment deemed not to be in good working order upon arrival at Facility.
Sample 1
Equipment in Good Working Order. Lessor has tested the Equipment in accordance with reasonable industry standards and found it to be in working order immediately prior to the inception of this Agreement, and to the extent Lessee has disclosed to Lessor all of the intended uses of the Equipment, it is fit for its intended purpose. Other than what is set forth herein, Lessee acknowledges that the Equipment is rented/leased without warranty, or guarantee, except as required by law or otherwise stated in this Agreement.
Sample 1
AutoNDA by SimpleDocs
Equipment in Good Working Order. Customer shall be responsible for delivering the Mining Equipment to the Facility in good working order and suitable for use in the Facility. Customer is responsible for all risk of loss or damage to the prior to Company receiving the Equipment at the Facility. Customer shall be responsible for any and all costs associated with the troubleshooting and repair or replacement of Mining Equipment, including parts and labor at Company’s then-current rates. Company is not responsible in any way for installation costs, delays or loss of profits as a result of Mining Equipment deemed not to be in good working order.
Sample 1

Related to Equipment in Good Working Order

  • Personal Protective Equipment (PPE Each employee responding to or engaged in fire suppression activities will use the appropriate safety clothing and equipment. Each department is responsible for seeing that CAL/OSHA standards for safety clothing and equipment are provided and used for wildland firefighting. Wildland fire suppression safety clothing and equipment includes:  Safety helmet that meets the minimum standards required by California Code of Regulations (CCR), Title 8, Section 3410.  Goggles, protection that meets the minimum requirements for design, construction and use as required by CCR, Title 8, Sections 3382 and 3404.  Ear protection to comply with CCR, Title 8, Sections 3405 and 3410(c).  Nomex hood, shroud, or equivalent face and neck protection.  Nomex shirt  Nomex pants  Gloves, CAL/OSHA approved for wildland firefighting.  Safety work boots, heavy-duty, lace-type, with deeply lugged soles and heels, and leather tops at least eight inches in height.  Wildland fire shelter

  • System Upgrade Facilities and System Deliverability Upgrades Connecting Transmission Owner shall design, procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Appendix A hereto. The responsibility of the Developer for costs related to System Upgrade Facilities and System Deliverability Upgrades shall be determined in accordance with the provisions of Attachment S to the NYISO OATT.

  • Personnel Equipment and Material Engineer shall furnish and maintain, at its own expense, quarters for the performance of all Engineering Services, and adequate and sufficient personnel and equipment to perform the Engineering Services as required. All employees of Engineer shall have such knowledge and experience as will enable them to perform the duties assigned to them. Any employee of Engineer who, in the reasonable opinion of County, is incompetent or whose conduct becomes detrimental to the Engineering Services shall immediately be removed from association with the Project when so instructed by County. Engineer certifies that it presently has adequate qualified personnel in its employment for performance of the Engineering Services required under this Contract, or will obtain such personnel from sources other than County. Engineer may not change the Project Manager without prior written consent of County.

  • Computer Equipment Recycling Program If this Contract is for the purchase or lease of computer equipment, then Contractor certifies that it is in compliance with Subchapter Y, Chapter 361 of the Texas Health and Safety Code related to the Computer Equipment Recycling Program and the Texas Commission on Environmental Quality rules in 30 TAC Chapter 328.

  • Customer Equipment Customer represents and warrants that it owns or has the legal right and authority, and will continue to own or maintain the legal right and authority during the term of this Agreement, to place and use the Customer Equipment as contemplated by this Agreement. Customer further represents and warrants that its placement, arrangement, and use of the Customer Equipment in the Internet Data Centers complies with the Customer Equipment Manufacturer's environmental and other specifications.

  • Protective Equipment Licensee, and its employees and contractors, shall utilize and install adequate protective equipment to ensure the safety of people and facilities, consistent with Applicable Standards. Licensee shall at its own expense install protective devices designed to handle the voltage and current impressed on its Communications Facilities in the event of a contact with the supply conductor, as specified in Applicable Standards. Except as provided in Article 15.1, District shall not be liable for any actual or consequential damages to Licensee’s Communications Facilities or Licensee’s customers’ facilities.

  • Personal Protective Equipment 64.1 While not being part of any issue of work clothing/equipment supplied (see clause 26), the Employer shall be required to provide personal protective equipment (SAA approved) for use, when necessary for the Employee to perform their required duties including: (a) ear/hearing protection; (b) gloves; and (c) skin protective cream/sun screen (30+/50+ rating). 64.2 In addition, one pair of UV-rated safety glasses or UV-rated clip-ons suitable to overlay prescription spectacles, shall be made available for Employees who are required to work on reflective surfaces such as: (a) metal decking; (b) large concrete slabs exposed to sunlight; (c) roofing; and (d) curtain xxxxxxx.

  • Interconnection Customer Drawings Within one hundred twenty (120) days after the date of Initial Operation, unless the Interconnection Parties agree on another mutually acceptable deadline, the Interconnection Customer shall deliver to the Transmission Provider and the Interconnected Transmission Owner final, “as-built” drawings, information and documents regarding the Customer Interconnection Facilities, including, as and to the extent applicable: a one-line diagram, a site plan showing the Customer Facility and the Customer Interconnection Facilities, plan and elevation drawings showing the layout of the Customer Interconnection Facilities, a relay functional diagram, relaying AC and DC schematic wiring diagrams and relay settings for all facilities associated with the Interconnection Customer's step-up transformers, the facilities connecting the Customer Facility to the step-up transformers and the Customer Interconnection Facilities, and the impedances (determined by factory tests) for the associated step-up transformers and the Customer Facility. As applicable, the Interconnection Customer shall provide Transmission Provider and the Interconnected Transmission Owner specifications for the excitation system, automatic voltage regulator, Customer Facility control and protection settings, transformer tap settings, and communications.

  • New Equipment Where new types of equipment and/or operations, for which rates of pay are not established by this Agreement, are put into use after the ratification date of this Agreement within operations covered by this Agreement, rates governing such operations shall be subject to negotiations between the parties. This paragraph shall apply to all new types of equipment including office and clerical equipment. In the event an agreement cannot be reached within sixty (60) days after the date such equipment is put into use, the matter may shall be submitted to the National Grievance Committee for final disposition. Rates agreed upon or awarded shall be effective as of the date equipment is put to use

  • Equipment and Materials CONTRACTOR shall provide all equipment, materials, and supplies necessary for the performance on the Agreement except:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!