Extra Board Transit Operators. A) Extra board transit operators Scheduled Work:
Extra Board Transit Operators
Extra Board Transit Operators Sample Clauses
Related to Extra Board Transit Operators
Contractor’s Project Manager and Key Personnel Contractor shall appoint a Project Manager to direct the Contractor’s efforts in fulfilling Contractor’s obligations under this Contract. This Project Manager shall be subject to approval by the County and shall not be changed without the written consent of the County’s Project Manager, which consent shall not be unreasonably withheld. The Contractor’s Project Manager shall be assigned to this project for the duration of the Contract and shall diligently pursue all work and services to meet the project time lines. The County’s Project Manager shall have the right to require the removal and replacement of the Contractor’s Project Manager from providing services to the County under this Contract. The County’s Project manager shall notify the Contractor in writing of such action. The Contractor shall accomplish the removal within five (5) business days after written notice by the County’s Project Manager. The County’s Project Manager shall review and approve the appointment of the replacement for the Contractor’s Project Manager. The County is not required to provide any additional information, reason or rationale in the event it The County is not required to provide any additional information, reason or rationale in the event it requires the removal of Contractor’s Project Manager from providing further services under the Contract.
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety
Leave, Board of Directors A nurse who is elected to the Board of Directors of the Ontario Nurses' Association, other than to the office of President, shall be granted upon request such leave(s) of absence as she or he may require to fulfill the duties of the position. Reasonable notice - sufficient to adequately allow the Hospital to minimize disruption of its services shall be given to the Hospital for such leave of absence. Notwithstanding Article 10.04, there shall be no loss of seniority or service for a nurse during such leave of absence. Leave of absence under this provision shall be in addition to the Union leave provided in Article 11.02
Parent Board of Directors The Board of Directors of Parent will take all actions necessary such that two members of Company's Board of Directors reasonably acceptable to Parent, at least one of whom is an independent director of the Company's Board of Directors, shall be appointed to Parent's Board of Directors as of the Effective Time with a term expiring at the next annual meeting of Parent's stockholders.
Professional Memberships Each employee is eligible for reimbursement for membership fees or dues paid for the maintenance of a license required to perform employee’s job and for dues paid for membership in one additional job related professional association.
Independent Directors Those Directors who are not “interested persons” of the Company as such term is defined in the 1940 Act.
Regulated Entities None of the Company, any Person controlling the Company, or any Subsidiary, is an "Investment Company" within the meaning of the Investment Company Act of 1940. The Company is not subject to regulation under the Public Utility Holding Company Act of 1935, the Federal Power Act, the Interstate Commerce Act, any state public utilities code, or any other Federal or state statute or regulation limiting its ability to incur Indebtedness.
Management by Board of Directors (a) The management of the Company is fully reserved to the Members, and the Company shall not have “managers” as that term is used in the Act. The powers of the Company shall be exercised by or under the authority of, and the business and affairs of the Company shall be managed under the direction of, the Members, who, except as expressly provided otherwise in this Agreement, shall make all decisions and take all actions for the Company. (b) The Members shall have the power and authority to delegate to one or more other persons the Members’ rights and power to manage and control the business and affairs, or any portion thereof, of the Company, including to delegate to agents, officers and employees of a Member or the Company, and to delegate by a management agreement with or otherwise to other Persons. (c) The Members hereby delegate to the Board of Directors of the Company (the “Board”), to the fullest extent permitted under this Agreement and Delaware law and subject to Section 7.1(d), all power and authority related to the Company’s management and control of the business and affairs of the Partnership. (d) Notwithstanding anything herein to the contrary, without obtaining approval of Members representing a Majority Interest, the Company shall not, and shall not take any action to cause the Partnership to, (i) sell all or substantially all of the assets of the Company or the Partnership, (ii) merge or consolidate, (iii) to the fullest extent permitted by Applicable Law, dissolve or liquidate, (iv) make or consent to a general assignment for the benefit of its respective creditors; (v) file or consent to the filing of any bankruptcy, insolvency or reorganization petition for relief under the United States Bankruptcy Code naming the Company or the Partnership, as applicable, or otherwise seek, with respect to the Company or the Partnership, such relief from debtors or protection from creditors generally; or (vi) take various actions similar to those described in any of clauses (i) through (v) of this Section 7.1(d).
LABOR/MANAGEMENT COMMITTEES A. Statewide
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
