Referral Procedure Section 4.01 In the interest of maintaining an efficient system of production in the Industry, providing for an orderly procedure of referral of applicants for employment, preserving the legitimate interests of the employees in their employment status within the area and of eliminating discrimination in employment because of membership or non-membership in the Union, the parties hereto agree to the following system of referral of applicants for employment.
Section 4.02 The Union shall be the sole and exclusive source of referral of applicants for employment.
Section 4.03 The Employer shall have the right to reject any applicant for employment.
Section 4.04 The Union shall select and refer applicants for employment without discrimination against such applicants by reason of membership or non-membership in the Union and such selection and referral shall not be affected in any way by rules, regulations, by-laws, constitutional provisions or any other aspect or obligation of Union membership policies or requirements. All such selection and referral shall be in accord with the following procedure.
Section 4.05 The Union shall maintain a register of applicants for employment established on the basis of the Classifications and Groups listed below. Each applicant for employment shall be registered in the highest priority Group in the classification or classifications for which he qualifies. GROUP - I. All applicants for employment who have three and one-half (3 1/2) or more years’ experience in the trade, are residents of the geographical area constituting the normal construction labor market, have passed a Journeyman Lineman's examination given by a duly constituted Outside Construction Local Union of the IBEW or have been certified as a Journeyman Lineman by any Outside Joint Apprenticeship and Training Committee, and who have been employed in the trade for a period of at least one (1) year in the last three and one-half (3 1/2) years in the geographical area covered by the collective bargaining agreement. Group I status shall be limited to one Local Union at one time. An applicant who qualifies for Group I in a local union shall be so registered electronically and remain on Group I in that local union unless and until the applicant designates another local union as his or her Group I local union. If an applicant qualifies for Group I status in a local union other than his or her home local union and designates that local as his or her Group I local union, the business manager of the new group 1 status local union shall by electronic means notify the business manager of the applicant’s former Group I status local union.
Discipline Procedure 1. Disciplinary action may be imposed for violation of written rules and regulations as set forth by the Board, incompetence, inefficiency, dishonesty, drunkenness, immoral conduct, insubordination, discourteous treatment of the public, neglect of duty, misfeasance, malfeasance, nonfeasance, any other failure of good behavior, or conviction of a felony.
2. No employee shall be disciplined without first having had the opportunity for a hearing, if the employee so requests, with an OAPSE representative of his/her choice present. The employee shall be given a written statement containing the charges and the time and place of the hearing. The written statement shall notify the employee of his/her rights to OAPSE representation. The employee must be given the opportunity to sign the statement acknowledging receipt of the statement and date received. Under emergency conditions as determined by the supervisor (including, but not limited to, health and/or safety of the employee or other employees; blatant insubordination; or refusal to work), the supervisor may immediately suspend an employee without pay for a period of up to three (3) work days without the formal hearing described above. An opportunity for a formal hearing with the supervisor must be provided within the suspension period. Failure to provide an opportunity for a hearing during the suspension period shall preclude the right of further discipline for the offense causing the initial suspension. Emergency suspensions will not be subject to Section 6 of this Article.
3. Disciplinary action of less than discharge should generally be progressive and corrective in nature.
A. Disciplinary actions shall be grievable. This Section shall supersede existing state law governing termination of employment (O.R.C. 3319.081).
B. In determining progressive and corrective action, just cause shall be construed and limited to the nature and seriousness of the offense, the effect the alleged conduct has on the Board’s operation, the discipline or lack thereof used in other similar situations known to the Board, and the appropriateness of the proposed penalty in view of the record and length of service of the charged employee. The enumeration of these factors is not intended to preclude either the exercise of good and sound business judgment or to minimize the importance of an employee’s property interest in his job.
PROPOSED MOBILITY PROGRAMME The proposed mobility programme includes the indicative start and end months of the agreed study programme that the student will carry out abroad. The Learning Agreement must include all the educational components to be carried out by the student at the receiving institution (in table A) and it must contain as well the group of educational components that will be replaced in his/her degree by the sending institution (in table B) upon successful completion of the study programme abroad. Additional rows can be added as needed to tables A and B. Additional columns can also be added, for example, to specify the study cycle-level of the educational component. The presentation of this document may also be adapted by the institutions according to their specific needs. However, in every case, the two tables A and B must be kept separated, i.e. they cannot be merged. The objective is to make clear that there needs to be no one to one correspondence between the courses followed abroad and the ones replaced at the sending institutions. The aim is rather that a group of learning outcomes achieved abroad replaces a group of learning outcomes at the sending institution, without having a one to one correspondence between particular modules or courses. A normal academic year of full-time study is normally made up of educational components totalling 60 ECTS* credits. It is recommended that for mobility periods shorter than a full academic year, the educational components selected should equate to a roughly proportionate number of credits. In case the student follows additional educational components beyond those required for his/her degree programme, these additional credits must also be listed in the study programme outlined in table A. When mobility windows are embedded in the curriculum, it will be enough to fill in table B with a single line as described below: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Mobility window … Total: 30 Otherwise, the group of components will be included in Table B as follows: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Course x … 10 Module y … 10 Laboratory work … 10 Total: 30 The sending institution must fully recognise the number of ECTS* credits contained in table A if there are no changes to the study programme abroad and the student successfully completes it. Any exception to this rule should be clearly stated in an annex of the Learning Agreement and agreed by all parties. Example of justification for non-recognition: the student has already accumulated the number of credits required for his/her degree and does not need some of the credits gained abroad. Since the recognition will be granted to a group of components and it does not need to be based on a one to one correspondence between single educational components, the sending institution must foresee which provisions will apply if the student does not successfully complete some of the educational components from his study programme abroad. A web link towards these provisions should be provided in the Learning Agreement. The student will commit to reach a certain level of language competence in the main language of instruction by the start of the study period. The level of the student will be assessed after his/her selection with the Erasmus+ online assessment tool when available (the results will be sent to the sending institution) or else by any other mean to be decided by the sending institution. A recommended level has been agreed between the sending and receiving institutions in the inter-institutional agreement. In case the student would not already have this level when he/she signs the Learning Agreement, he/she commits to reach it with the support to be provided by the sending or receiving institution (either with courses that can be funded by the organisational support grant or with the Erasmus+ online tutored courses). All parties must sign the document; however, it is not compulsory to circulate papers with original signatures, scanned copies of signatures or digital signatures may be accepted, depending on the national legislation. * In countries where the "ECTS" system it is not in place, in particular for institutions located in partner countries not participating in the Bologna process, "ECTS" needs to be replaced in all tables by the name of the equivalent system that is used and a weblink to an explanation to the system should be added. The section to be completed during the mobility is needed only if changes have to be introduced into the original Learning Agreement. In that case, the section to be completed before the mobility should be kept unchanged and changes should be described in this section. Changes to the mobility study programme should be exceptional, as the three parties have already agreed on a group of educational components that will be taken abroad, in the light of the course catalogue that the receiving institution has committed to publish well in advance of the mobility periods and to update regularly as ECHE holder. However, introducing changes might be unavoidable due to, for example, timetable conflicts. Other reasons for a change can be the request for an extension of the duration of the mobility programme abroad. Such a request can be made by the student at the latest one month before the foreseen end date. These changes to the mobility study programme should be agreed by all parties within four to seven weeks (after the start of each semester). Any party can request changes within the first two to five-week period after regular classes/educational components have started for a given semester. The exact deadline has to be decided by the institutions. The shorter the planned mobility period, the shorter should be the window for changes. All these changes have to be agreed by the three parties within a two-week period following the request. In case of changes due to an extension of the duration of the mobility period, changes should be made as timely as possible as well. Changes to the study programme abroad should be listed in table C and, once they are agreed by all parties, the sending institution commits to fully recognise the number of ECTS credits as presented in table C. Any exception to this rule should be documented in an annex of the Learning Agreement and agreed by all parties. Only if the changes described in table C affect the group of educational components in the student's degree (table B) that will be replaced at the sending institution upon successful completion of the study programme abroad, a revised version should be inserted and labelled as "Table D: Revised group of educational components in the student's degree that will be replaced at sending institution". Additional rows and columns can be added as needed to tables C and D. All parties must confirm that the proposed amendments to the Learning Agreement are approved. For this specific section, original or scanned signatures are not mandatory and an approval by email may be enough. The procedure has to be decided by the sending institution, depending on the national legislation.
EXTRA-CURRICULAR ACTIVITIES 1. In this Agreement, extra-curricular programs and activities include all those that are beyond the provincially prescribed and locally determined curricula of the school district.
2. The Board and the Association consider it desirable that teachers participate in extra-curricular activities, and recognize that participation in extra-curricular activities by the individual teacher is on a voluntary basis.
Referral Procedures Section 1. For Local Unions now having a job referral system as contained in their Collective Bargaining Agreement, the Contractor agrees to utilize such system and it shall be used exclusively by such Contractor, except as it may be modified by this Article. Referrals shall not be affected by obligations of Union membership or the lack thereof. Where airport security clearance requirements apply to work to be performed, the Contractor shall inform the Union’s hiring hall dispatcher of those requirements when requesting workers.
Section 2. In the event that Local Unions are unable to fill any request for employees within the time specified by the local CBAs the Contractor may employ applicants from any other available source. The Contractor shall inform the Union of the name and social security number of any applicants hired from other sources and shall refer the applicant to the Local Union for dispatch to the projects prior to the commencement of work.
Section 3. There shall be no discrimination against any employee or applicant for employment because of his/her membership or non-membership in the union or based upon race, creed, color, sex, age or national origin, or any other legally protected class of such employee or applicant.
Section 4. No employee covered by this Agreement shall be required to join any Union as a condition of being employed on the project; provided, however, that an employee who is a member of the referring union at the time of the referral shall maintain that membership while employed under the Agreement. All employees shall, however, be required to comply with the union security provision of the applicable Collective Bargaining Agreement, for the period during which they are performing on-site work, except as modified by this Agreement. The Contractor agrees to deduct union dues or representation fees, whichever is applicable, from the pay of any employee who executes a voluntary authorization for such deductions and to remit the dues to the Union or Council.
Section 5. The parties agree that where a Contractor is not party to a current Collective Bargaining Agreement with the Union having jurisdiction over the affected work, the Contractor may request by name, and the Local will honor, referral of up to a maximum of five (5) persons per each contractor (“core” employees), provided that the Contractor first demonstrate that those persons possess the following qualifications:
(1) Any license required by state or federal law for the project work to be performed;
(2) Have worked a total of at least one thousand (1,000) hours in the construction craft during the prior three (3) years;
(3) Were on the Contractor’s active payroll for at least sixty (60) out of the one hundred eighty (180) calendar days prior to the contract award;
(4) Have the ability to perform the work safely. The Contractor may elect to hire its first “core” employee to be a xxxxxxx. After the contractor hires his first core employee, the Union will refer to such contractor one journeyman employee from the hiring hall out-of–work list for the affected trade or craft, then refer one of such Contractor’s “core” employees as a journeyman, and shall, alternate, one core employee and one employee from the out-of-work list, until such Contractor’s crew requirements are met or until such Contractor has hired five (5) “core” employees, whichever occurs first. Thereafter, all additional employees in the affected trade or craft shall be hired exclusively from the hiring hall out-of-work list(s). For the duration of the Contractor’s work the ratio of “core” employees to hiring hall referrals shall be maintained and when the Contractor’s workforce is reduced, employees shall be reduced in the same ratio as was applied in the initial hiring. All employees, core and union, shall be dispatched from the appropriate union. Trust benefits shall be paid on all employees, core and union.
Section 6. Upon referral or dispatch from a Union, “turnaround” or refusal of any worker by the Contractors, requires written explanation from the Contractor that shall be communicated from the Prime Contractor to the Port and affected Union within 48 hours.
Section 7. Individual seniority will not be recognized or applied to employees working on the project. This provision will not interfere with or supersede the use by individual Contractors of “call lists” maintained by such Contractor pursuant to addenda to the local Collective Bargaining Agreement between such Contractor and a Union signatory to this Agreement.
Section 8. The selection of craft foremen and/or general foremen and the number of such foremen and/or general foremen required shall be entirely the responsibility of the Contractor. Craft foremen shall be designated working foremen at the request of the Contractor. Craft workers covered by this Agreement will, in the normal day- to-day operations, take their direction and supervision from their xxxxxxx.
Deviation from Grievance Procedure The Employer agrees that, after a grievance has been discussed at Step 2 of the grievance procedure the Employer or his representatives shall not initiate any discussion or negotiations with respect to the grievance, either directly or indirectly with the aggrieved employee without the consent of the xxxxxxx or the Union.
Retainage for Unacceptable Corrective Action Plan or Plan Failure If the corrective action plan is unacceptable to the Department or Customer, or implementation of the plan fails to remedy the performance deficiencies, the Department or Customer will retain ten percent (10%) of the total invoice amount. The retainage will be withheld until the Contractor resolves the performance deficiencies. If the performance deficiencies are resolved, the Contractor may invoice the Department or Customer for the retained amount. If the Contractor fails to resolve the performance deficiencies, the retained amount will be forfeited to compensate the Department or Customer for the performance deficiencies.
Administrative Procedure iTrip staff will administer and determine whether a damage qualifies as Covered Damage. Such staff will have the sole authority to determine the nature and extent of damages, necessary repairs and eligibility for the waiver of liability described herein. The Covered Guest must report any theft or damage to the unit or its contents to iTrip staff by the time of check-out or any otherwise applicable damage waiver for such Covered Guest will be void. The iTrip Franchisee has ultimate claim administration authority. Arbitration is required prior to litigation.
HIRING PROCEDURE 5.1 At the Pre-job Conference the Employer may request and the Local Union shall clear:
5.1.1 Up to ten percent (10%) of the Principal Operators excluding mechanics, required for the job from other Locals of the Union and each such Principal Operator shall be entitled to perform only the work for which he is cleared. Up to one- half (½) of those Principal Operators cleared under this provision may commence employment at the start of the Right-of-Way operations and the balance of those Principal Operators cleared under this provision may commence employment not prior to the start of the Pipe Gang operations.
5.1.2 Up to fifty percent (50%) of the mechanics, utility welders and lubrication and service unit operators required for the job who are members of another Local of the Union. This ratio shall be maintained on a "one-to-one" basis for the duration of the job. The first employee shall be a member of the Local Union having geographic jurisdiction for the job.
5.1.3 The Employer shall have the right to name request by classification up to fifty percent (50%) of the required employees who are members of the Local Union. Those employees hired under the provisions of Article 5.1.1 and 5.1.2 above shall be included in the fifty percent (50%). This ratio shall be maintained on a one-to-one basis for the duration of the job. Thereafter the Employer shall notify the Local Union of all his employee requirements and shall only hire those who have been cleared for work by the Local Union having jurisdiction.
5.2 The Local Union shall be given forty-eight (48) hours exclusive of Saturdays, Sundays, and holidays to supply the required employees but shall advise the Employer of expected delays in dispatching any employees within forty- eight (48) hours. Employees shall be entitled to Waiting Time or Reporting Time upon arrival at the jobsite on the day designated by the Employer for arrival, if no work is provided.
5.3 All employees shall be in possession of a referral slip from the Local Union for identification purposes unless the Local Union otherwise clears an employee for hire by telegram, telex, facsimile transmission or other means of written communication. All out-of-province employees must provide the Local Union having jurisdiction with a copy of a duly authorized Travel Card issued by his/her home Local prior to being issued a referral slip and cleared to work.
5.4 Subject to the terms and conditions of this Agreement, the Employer shall have the right to refuse any referral provided the cause for such refusal is stated and shall not be unreasonable.
5.5 If the Local Union is unable to supply the required employees in accordance with Article 5.2, the Employer may obtain employees elsewhere, subject to the provisions of Article 3.3.
5.6 In the event the Local Union is unable to supply the required qualified employees, the Employer will provide every opportunity to any employee who has successfully completed a pipeline Operating Engineers training course, and is approved by a joint training committee, and the employee will be admitted to membership in the Local Union in accordance with Article
Active Duty If an individual is inducted into military service, the District will abide by state law regarding veteran’s benefits.
