Stop Trade An SEC or judicial stop trade order or Principal Market trading suspension that lasts for five or more consecutive trading days.
Name; Trade Names and Styles The name of Borrower set forth in the heading to this Agreement is its correct name. Listed on the Schedule are all prior names of Borrower and all of Borrower's present and prior trade names. Borrower shall give Silicon 30 days' prior written notice before changing its name or doing business under any other name. Borrower has complied, and will in the future comply, with all laws relating to the conduct of business under a fictitious business name.
REFERRED CLIENT From time to time, XXXX.xxx will refer potential clients to the real estate agents affiliated with the Recipient Broker identified above. (“Recipient Agent”) Each potential client that is presented with the Recipient Broker/Recipient Agent’s contact information by XXXX.xxx shall be deemed a “Referred Client” as of the date XXXX.xxx identifies such client to Recipient Broker and/or Recipient Agent. XXXX.xxx will identify a Referred Client to Recipient Broker and/or Recipient Agent by either (i) sending an email and/or text message to Recipient Broker and/or Recipient Agent that includes the Referred Client’s contact information (ii) sending Recipient Broker and/or Recipient Agent a monthly report and agent portal that includes all Referred Clients who received Recipient Broker/Agent’s contact information through the XXXX.xxx platform. Each monthly report will detail the Client Name, Address, and Date and Time the Recipient Broker/Agent’s information was provided to the Referred Client.
License for Txdot Logo Use DocuSign Envelope ID: A2C96816-AFCF-4B6A-9B51-D8FCE6C6223E DocuSign Envelope ID: 81600B2C-53E9-4E39-BA73-002AB2A7A001
Patent Marking LICENSEE shall xxxx all Licensed Products made, used or sold under the terms of this Agreement, or their containers, in accordance with the applicable patent marking laws.
SKILLED TRADES Note: The provisions of the Collective Agreement shall apply to the skilled trades except as altered by the provisions of this Article.
30.01 Skilled trade classifications for the purpose of this Collective Agreement will be as follows:
30.02 Seniority shall be by skilled trade classification, that is classifications will be non-interchangeable.
30.03 Employees entering a skilled trade classification shall have a seniority date as of the entry into such classification (including the apprenticeship period if such period was served in the Company).
30.04 A non-skilled trades (i.e. production) employee will not exercise his or her seniority rights in any skilled trade classification, nor will any skilled trades employee exercise seniority in any production classification after the date of ratification except as set forth in Article 31.07(d).
30.05 In the event that a skilled trades employee (i.e. apprentice or journeyman) is unable to perform his or her job as defined in Article 18, the provisions of Article 18 will apply. In no event will these provisions contravene the Human Rights Code.
30.06 The term 'journeyman' as used in this Article shall mean any person:
(a) Who presently is in a skilled trades classification; or
(b) Who has served a bona fide apprenticeship and has a certificate which substantiates his/her claim of such service; or
(c) Who has had eight (8) years of practical experience and can prove same with proper affidavits. The Company will consider the possession of a CAW/UAW journeyman/woman card as presumptive proof of qualifications.
30.07 In the event of a reduction in the work force of any skilled trades classification, the following procedure will apply:
(a) First, probationary journeyman within a classification shall be laid off;
(b) Second, apprentices within a classification shall be laid off based upon the first to go will be the last who entered the program;
(c) Third, if further reductions in a skilled trades classification are required, journeyman shall, in reverse order of seniority (junior employee first) in such a classification, be laid off.
(d) In the event of a layoff, skilled trades journeyperson employees will be allowed one time only to displace production employees, provided that such skilled trades journeyperson employees are originally production employees and in accordance with Article 14 of this Agreement. Skilled trades journeyperson employees must return to their skilled trades jobs as soon as they are recalled.
(e) In the event of the disqualification of an apprentice, he/she will be allowed, one time only, to displace a production employee, provided that such apprentice was originally a production employee and in accordance with Article 14 of this Agreement.
30.08 In the event that there is an increase in any skilled trade classification, recall shall be made in reverse order of seniority, commencing with journeyman then
30.09 In the event the Company acquires some advanced type of machinery or equipment that would call for special servicing by skilled trades employees, it is agreed that the skilled trades employees will be trained so that they may become familiar with the necessary repair and maintenance techniques required. In the case of initial installations of new equipment, processes, technology and warranty work, the Company will involve a minimum of one (1) skilled trades employee of each affected trade with the supplier's on-site personnel for training purposes.
30.10 (1) The Company and Union recognize the importance of the following principles:
(i) The Company recognizes the Union's desire to perform all Skilled Trades work covered under the jurisdiction of this contract except as amended below.
(ii) The Company will not use subcontracting as a method of eliminating overtime for Skilled Trade employees
(iii) The parties recognize that where the Company meets its obligations as set forth in Article 31 (including overtime opportunities), there shall be no additional responsibility on the part of the Company to pay additional overtime to any other employee. However, where it is alleged that the Company has not met its obligations under Article 31, the employee concerned and/or Union shall have the right to seek redress under the grievance procedure.
Shift Trades 6.16.01 Employees may arrange for another employee to work their shift subject to the Manager's approval, consistent with the following:
6.16.01.01 Other than in exceptional circumstances, advice of the trade will be provided to the Manager in writing, in advance, and will be signed by the employees involved.
6.16.01.02 The employee who works a traded shift will be paid for the time worked at his/her rate of pay.
6.16.01.03 Overtime worked prior to or following a traded shift and premium credits on a holiday, in accordance with Article 7.03 and Article 13 respectively, will be credited to the employee who worked the shift as though the shift had been the employee's scheduled shift.
6.16.01.04 All recall credits will be credited to the employee who is recalled.
6.16.01.05 All time debits will be deducted from the employee who agreed to work the shift.
6.16.01.06 Company sick leave provisions will apply to the employee who agreed to work the shift and only to the amount provided for in such regulations. All time not worked in excess of one (1) full shift during a work day shall be debited in accordance with Article 6.16.01.05.
6.16.01.07 Shift trades may only be arranged between employees working in the same location except that, at locations with thirty (30) or less full-time employees, shift trades may be arranged by employees at these locations with employees at other locations within the same base and classification. Such shift trades may be granted subject to the employees concerned being qualified to perform the work function of the other party.
6.16.01.08 An employee's ability to trade shifts is not intended to allow employees to be absent from the work place for extended periods of time nor to take alternate employment.
6.16.01.09 Partial shift trades are permitted provided that no shift is split into more than two (2) parts. No more than two (2) employees may cover a single shift. Partial
6.16.01.10 It will be the sole responsibility of the employees to ensure that the introduction of partial shift trades has absolutely no adverse operational and customer service impact.
6.16.01.11 Under no circumstances shall an employee be allowed to leave his/her assigned duties or work area until their task is completed. His/her “shift trade partner” must be present and ready to take over their next assignment. This transition needs to be seamless to the customer.
6.16.01.12 There will not be additional meal or rest periods assigned to a shift subject to a partial shift trade. Meal and rest periods will be taken as scheduled.
6.16.01.13 A minimum of one (1) hour must be worked by one of the employees involved with a partial shift trade.
6.16.01.14 Any violation of the terms set out herein will result in the immediate suspension of the “partial shift trade privileges” for the employee. Such a measure will be deemed to be of an administrative nature and will not be grievable under any circumstances except as provided below.
6.16.01.15 Notwithstanding the above, the Union may file a grievance only to allege that the violation for which the partial shift trade privileges were revoked did not occur. The Union will bear the onus of the burden of proof in such circumstances.
6.16.01.16 Rules governing such other matters as deadlines for, and approval of, partial shift trade requests will be adopted locally.
XXXXXXXX AND W XXXXXXX XXXXXX
PUBLICITY AND BRANDING 24.1 Subject to Clause 25 (Marketing), the Supplier shall not make any press announcements or publicise this Framework Agreement or its contents in any way without the Authority's prior Approval.
24.2 The Supplier shall take all reasonable steps to ensure that its Staff, servants, employees, agents, Sub-Contractors, suppliers, professional advisors and consultants comply with Clause 24.1.
24.3 The Authority shall be entitled to publicise this Framework Agreement in accordance with any legal obligation upon the Authority, including any examination of this Framework Agreement by the National Audit Office pursuant to the National Audit Act 1983 or otherwise.
24.4 The Supplier shall not do anything or cause anything to be done, which may damage the reputation of the Authority or bring the Authority into disrepute.
24.5 The Supplier shall at all times during the Term on written demand fully indemnify the Authority and keep the Authority fully indemnified against all losses, incurred by, awarded against or agreed to be paid by the Supplier arising out of any claim or infringement or alleged infringement (including the defence of such infringement or alleged infringement) resulting from the Supplier's use of the Government Procurement Service logo.
Outage Authority and Coordination Developer and Connecting Transmission Owner may each, in accordance with NYISO procedures and Good Utility Practice and in coordination with the other Party, remove from service any of its respective Attachment Facilities or System Upgrade Facilities and System Deliverability Upgrades that may impact the other Party’s facilities as necessary to perform maintenance or testing or to install or replace equipment. Absent an Emergency State, the Party scheduling a removal of such facility(ies) from service will use Reasonable Efforts to schedule such removal on a date and time mutually acceptable to both the Developer and the Connecting Transmission Owner. In all circumstances either Party planning to remove such facility(ies) from service shall use Reasonable Efforts to minimize the effect on the other Party of such removal.