UNIFORMS AND EQUIPMENT Section 1. Sworn employees of the Sheriff’s Office who are assigned to positions requiring a uniform shall receive Agency-provided uniforms and accessories in accordance with Agency policy at no cost to the employee. Uniforms worn out through normal use shall be replaced by the Sheriff’s Office as determined and approved by the supply staff.
Section 2. Employees shall be permitted to purchase additional approved uniform pieces, excluding badges, from the Purchasing and Materials Division, provided sufficient quantities are on hand to cover the normal, required provision of uniforms to employees as per Section 1 above. Employees must pay for these items at the time of purchase or order.
Section 3. Employees assigned to uniformed positions shall be eligible to receive a uniform maintenance allowance in the amount of $150 per year provided the employee spent at least 182 days of the calendar year in a uniform assignment. This allowance will be paid to all eligible employees in the last paycheck of the calendar year each December during the term of this Agreement.
Section 4. The Sheriff’s Office shall issue body armor to employees and replace same in accordance with General Order 5-1.
Section 5. In the event an employee leaves the employ of the Sheriff’s Office, he shall return to the Sheriff’s Office all equipment, uniforms and accessories, including those personally purchased by the employee in accordance with Section 2 above.
Section 6. Employees whose prescription eyeglasses, contact lenses, hearing aids or watches are lost, damaged, or destroyed in the line of duty, except in cases where employee negligence caused or contributed to same, will be reimbursed for repair or replacement subject to the criteria detailed below. The Sheriff’s Office shall not reimburse for any other personal property lost, damaged or destroyed in the line of duty. The maximum reimbursement for prescription eyeglasses or hearing aids is the actual cost to repair or replace the item or $150, whichever is less. The maximum reimbursement for contact lenses or watches is the actual cost to repair or replace the item or $50, whichever is less. Requests for reimbursement for the personal property shall be made in writing to the employee’s immediate supervisor during the work shift in which the article of personal property was lost, damaged or destroyed. Except in cases of loss or when an item is repairable, the item for which reimbursement is sought should be turned in along with the written request for reimbursement. To aid in establishing the amount to be reimbursed, the employee will be required to provide to the Sheriff’s Office the receipt for the repair or replacement prior to reimbursement which must be approved by the Sheriff or his designee.
Particular Methods of Procurement of Consultants’ Services 1. Quality- and Cost-based Selection. Except as otherwise provided in paragraph 2 below, consultants’ services shall be procured under contracts awarded on the basis of Quality and Cost-based Selection.
Other Methods of Procurement of Consultants’ Services The following table specifies the methods of procurement, other than Quality and Cost-based Selection, which may be used for consultants’ services. The Procurement Plan shall specify the circumstances under which such methods may be used.
(a) Quality-based Selection (b) Selection under a Fixed Budget
AID TO OTHER UNIONS The Employer will not aid, promote or finance any labor group or organization which purports to engage in collective bargaining or make any agreement with any such group or organization for the purpose of undermining the Union.
System for Award Management (XXX) Requirement Alongside a signed copy of this Agreement, Grantee will provide Florida Housing with a XXX.xxx proof of registration and Commercial and Government Entity (CAGE) number. Grantee will continue to maintain an active XXX registration with current information at all times during which it has an active award under this Agreement.
Unbundled Network Terminating Wire (UNTW) 2.8.3.1 UNTW is unshielded twisted copper wiring that is used to extend circuits from an intra-building network cable terminal or from a building entrance terminal to an individual End User’s point of demarcation. It is the final portion of the Loop that in multi-subscriber configurations represents the point at which the network branches out to serve individual subscribers.
2.8.3.2 This element will be provided in MDUs and/or Multi-Tenants Units (MTUs) where either Party owns wiring all the way to the End User’s premises. Neither Party will provide this element in locations where the property owner provides its own wiring to the End User’s premises, where a third party owns the wiring to the End User’s premises.
System for Award Management (XXX) and Data Universal Numbering System (DUNS) Requirements.
Terms and Conditions Pertaining to Individual Account Service Title Title to Firm Full-Requirements Power Supply will transfer from Competitive Supplier to Participating Customers at the Point of Sale. In accordance with the Distribution Utility's Terms and Conditions for Competitive Suppliers, the Competitive Supplier will be responsible for any and all losses incurred on the local network transmission systems and distribution systems, as determined by the Distribution Utility. Billing and Payment Unless otherwise specified in an Exhibit to this ESA, all billing under this ESA shall be based on the meter readings of each Participating Customer's meter(s) performed by the Distribution Utility. Competitive Supplier shall cause the Distribution Utility to prepare and mail bills to Participating Customers monthly. The Competitive Supplier shall adopt the billing and payment terms offered by the Distribution Utility to its Eligible Customers on Default Service. If actual meter date is unavailable, the Competitive Supplier may cause the Distribution Utility to xxxx based on its good faith estimates of usage. Any overcharge or under-charge will be accounted for in the next billing period for which actual meter data is available. Regional and Local Transmission The prices quoted in Exhibit A do not include current and future charges for distribution service costs collected by the Distribution Utility under its distribution service tariff or local transmission costs as may be imposed by NYISO or individual electric utilities that have FERC transmission tariffs. The Competitive Supplier understands that these costs will be collected by the Distribution Utility. If, in the future, Competitive Supplier becomes responsible for such distribution or transmission costs, Competitive Supplier shall be entitled to collect such costs from Participating Customers to the extent permitted by any Governmental Rules. These costs are "pass through" costs as determined by the appropriate regulatory agencies.
Tandem Switching 4.5.1 The Tandem Switching capability Network Element is defined as:
(i) trunk-connect facilities, which include, but are not limited to, the connection between trunk termination at a cross-connect panel and switch trunk card; (ii) the basic switch trunk function of connecting trunks to trunks; and (iii) the functions that are centralized in the Tandem Switches (as distinguished from separate end office switches), including but not limited to call recording, the routing of calls to operator services and signaling conversion features.
4.5.2 Where <<customer_short_name>> utilizes portions of the BellSouth network in originating or terminating traffic, the Tandem Switching rates are applied in call scenarios where the Tandem Switching Network Element has been utilized. Because switch recordings cannot accurately indicate on a per call basis when the Tandem Switching Network Element has been utilized for an interoffice call originating from a UNE port and terminating to a BellSouth, Independent Company or Facility-Based CLEC office, BellSouth has developed, based upon call studies, a melded rate that takes into account the average percentage of calls that utilize Tandem Switching in these scenarios. BellSouth shall apply the melded Tandem Switching rate for every call in these scenarios. BellSouth shall utilize the melded Tandem Switching Rate until BellSouth has the capability to measure actual Tandem Switch usage in each call scenario specifically mentioned above, at which point the rate for the actual Tandem Switch usage shall apply. The UNE Local Call Flows set forth on BellSouth's website, as amended from time to time and incorporated herein by this reference, illustrate when the full or melded Tandem Switching rates apply for specific scenarios.
Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition
4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999.
4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities.
4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process.
4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers.
4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support.
4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities.
4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.
