Future Well Carries Sample Clauses

Future Well Carries. FX Energy hereby acknowledges and agrees that Apache has satisfied all of its seismic and drilling obligations to FX Energy in Poland other than as set forth in this paragraph. Apache will carry FX Energy in: (i) five xxxxx located within the parties' Area of Mutual Interest and in which both Apache and FX Energy participate (the "Carried Xxxxx"), and (ii) 350 kilometers of seismic in Blocks 410, 411, 412, 413, 414, 415, 430, 431, 432, 433, 452, and 000 (xxx "Xxxxxxxxxx Xxxxxx"). Each of the Carried Xxxxx will be drilled at a mutually agreeable location and to a depth sufficient to test Carboniferous or Devonian or deeper formations, estimated at a depth of 2,000 to 3,000 meters. If a proposed Carried Well is a well required to satisfy a minimum work obligation of either the Lublin Blocks (defined below) or Carpathian Blocks, then FX Energy will be required to elect to be carried in that well. In the event a well is proposed outside of the Lublin or Carpathian Blocks, FX Energy will have the right to elect to be carried in such well, provided that Apache and FX Energy agree that such well is substantially equivalent to the xxxxx previously drilled in Poland in terms of cost and depth. The commitments set forth in the previous paragraph are intended to supersede Apache's obligations to drill ten exploratory xxxxx within certain specified time periods, as more fully described in the following Agreements: (i) Lublin Participation Agreement. Participation Agreement dated as of April 16, 1997 between Apache Overseas, Inc. and FX Energy, Inc. pertaining to the Lublin Area Concessions; (ii) Carpathian Participation Agreement. Participation Agreement dated as of February 27, 1998 between Apache Overseas, Inc. and FX Energy, Inc. pertaining to the Western Carpathian Concessions; and
AutoNDA by SimpleDocs

Related to Future Well Carries

  • Business Continuity Plan The Warrant Agent shall maintain plans for business continuity, disaster recovery, and backup capabilities and facilities designed to ensure the Warrant Agent’s continued performance of its obligations under this Agreement, including, without limitation, loss of production, loss of systems, loss of equipment, failure of carriers and the failure of the Warrant Agent’s or its supplier’s equipment, computer systems or business systems (“Business Continuity Plan”). Such Business Continuity Plan shall include, but shall not be limited to, testing, accountability and corrective actions designed to be promptly implemented, if necessary. In addition, in the event that the Warrant Agent has knowledge of an incident affecting the integrity or availability of such Business Continuity Plan, then the Warrant Agent shall, as promptly as practicable, but no later than twenty-four (24) hours (or sooner to the extent required by applicable law or regulation) after the Warrant Agent becomes aware of such incident, notify the Company in writing of such incident and provide the Company with updates, as deemed appropriate by the Warrant Agent under the circumstances, with respect to the status of all related remediation efforts in connection with such incident. The Warrant Agent represents that, as of the date of this Agreement, such Business Continuity Plan is active and functioning normally in all material respects.

  • Business Continuity Registry Operator shall maintain a business continuity plan, which will provide for the maintenance of Registry Services in the event of an extraordinary event beyond the control of the Registry Operator or business failure of Registry Operator, and may include the designation of a Registry Services continuity provider. If such plan includes the designation of a Registry Services continuity provider, Registry Operator shall provide the name and contact information for such Registry Services continuity provider to ICANN. In the case of an extraordinary event beyond the control of the Registry Operator where the Registry Operator cannot be contacted, Registry Operator consents that ICANN may contact the designated Registry Services continuity provider, if one exists. Registry Operator shall conduct Registry Services Continuity testing at least once per year.

  • HEALTH & WELFARE 16:1 The parties signatory hereto shall enter into a Health and Welfare Plan for which there is a Trust Agreement, known as the Line Construction Benefit Fund, for the purpose of providing insurance benefits for eligible employees and/or their dependents. Effective the first of the month following the signature date of this Agreement, the Employer shall pay to the Line Construction Benefit Fund the sum of $6.50 for each hour worked. Hours worked shall be deemed to include straight-time hours worked, overtime hours worked, and report time not worked. Remittance shall be forwarded to the place designated by the parties hereto on or before the fifteenth (15th) day of each month for each hour worked in weekly payroll periods ending during the preceding month, together with a monthly payroll report on a form to be furnished to the Employer. It is understood and intended by the parties to this Agreement that the purpose of this clause is to establish an Employer financed Health and Welfare Trust and that contributions thereto shall not be deemed to be wages to which any employee shall have any right other than the right to have such contributions paid over to the Trust fund in accordance herewith. Failure of an individual Employer to make all payments provided for, including liquidated damages for late payments, within the time specified, shall be a breach of this Agreement and will further require action by the Trustees as set forth in the Trust Agreement. Any increase in the required contributions set forth above will be paid equally (50% by the Employer and 50% by the Employee). The amount paid by the Employee will come from their NEAP contribution. 16:2 HRA: Effective the first of the month following the signature date of this Agreement, the Employer also agrees to pay into the Line Construction Benefit Fund $1.00 per hour through the term of this Agreement. HRA is calculated on all hours worked for all working classifications covered by this Agreement. These contributions shall be used to provide Health Reimbursements Accounts(s) under the Line Construction Benefit Fund Plan of Benefits.

  • Safety Plan Developer’s safety plan specifically adapted for the Project. Developer's Safety Plan shall comply with all provisions regarding Project safety, including all applicable provisions in these Construction Provisions.

  • Alignment with Modernization Foundational Programs and Foundational Capabilities The activities and services that the LPHA has agreed to deliver under this Program Element align with Foundational Programs and Foundational Capabilities and the public health accountability metrics (if applicable), as follows (see Oregon’s Public Health Modernization Manual, (xxxx://xxx.xxxxxx.xxx/oha/PH/ABOUT/TASKFORCE/Documents/public_health_modernization_man ual.pdf): a. Foundational Programs and Capabilities (As specified in Public Health Modernization Manual) b. The work in this Program Element helps Oregon’s governmental public health system achieve the following Public Health Accountability Metric: c. The work in this Program Element helps Oregon’s governmental public health system achieve the following Public Health Modernization Process Measure:

  • WORKPLACE FLEXIBILITY The employer must ensure that any Individual Flexibility Agreement (IFA) is genuinely agreed to by the employer and the employee and result in the employee being better off overall at the time the IFA is made than the employee would have been if no IFA had been agreed to. 8.1 Notwithstanding any other provision of the Agreement, the employer and an individual employee may agree to vary the application of certain terms of the Agreement to meet the genuine individual needs of the employer and the individual employee. The terms the employer and the individual employee may agree to vary are the application of those permitted under Section 172 of the FW Act, and relates only to:- 8.1.1 arrangements for when work is performed; 8.1.2 salary sacrifice arrangements; 8.1.3 reduction in ordinary hours; and 8.1.4 are not unlawful terms under Section 194 of the FW Act. 8.2 The employer and the individual employee must have genuinely made the IFA without coercion or duress. An IFA can only be entered into after the individual employee has commenced employment with the employer. 8.3 The IFA between the employer and the individual employee must: 8.3.1 be confined to a variation in the application of one or more of the terms listed in Clause 8.1; and 8.4 The IFA between the employer and the individual employee must also: 8.4.1 be in writing, name the parties to the IFA and be signed by the employer and the individual employee and, if the employee is under eighteen (18) years of age, the employee’s parent or guardian; 8.4.2 state each term of the Agreement that the employer and the individual employee have agreed to vary; 8.4.3 detail how the application of each term has been varied by agreement between the employer and the individual employee;

  • Business Continuity Planning Supplier shall prepare and maintain at no additional cost to Buyer a Business Continuity Plan (“BCP”). Upon written request of Buyer, Supplier shall provide a copy of Supplier’s BCP. The BCP shall be designed to ensure that Supplier can continue to provide the goods and/or services in accordance with this Order in the event of a disaster or other BCP-triggering event (as such events are defined in the applicable BCP). Supplier’s BCP shall, at a minimum, provide for: (a) the retention and retrieval of data and files; (b) obtaining resources necessary for recovery, (c) appropriate continuity plans to maintain adequate levels of staffing required to provide the goods and services during a disruptive event; (d) procedures to activate an immediate, orderly response to emergency situations; (e) procedures to address potential disruptions to Supplier’s supply chain; (f) a defined escalation process for notification of Buyer, within two (2) business days, in the event of a BCP-triggering event; and (g) training for key Supplier Personnel who are responsible for monitoring and maintaining Supplier’s continuity plans and records. Supplier shall maintain the BCP and test it at least annually or whenever there are material changes in Supplier’s operations, risks or business practices. Upon Xxxxx’s written and reasonable request, Supplier shall provide Buyer an executive summary of test results and a report of corrective actions (including the timing for implementation) to be taken to remedy any deficiencies identified by such testing. Upon Xxxxx’s request and with reasonable advance notice and conducted in such a manner as not to unduly interfere with Supplier’s operations, Supplier shall give Buyer and its designated agents access to Supplier’s designated representative(s) with detailed functional knowledge of Supplier’s BCP and relevant subject matter.

  • Synchronization, Commissioning and Commercial Operation 4.1.1 The Power Producer shall give at least fifteen (15) days written notice to the SLDC / ALDC / DISCOM as the case may be, of the date on which it intends to synchronize the Power Project to the Grid System. 4.1.2 Subject to Article 4.1.1, the Power Project may be synchronized by the Power Producer to the Grid System when it meets all the connection conditions prescribed in the Grid Code and otherwise meets all other Indian legal requirements for synchronization to the Grid System. 4.1.3 The synchronization equipment and all necessary arrangements / equipment including Remote Terminal Unit (RTU) for scheduling of power generated from the Project and transmission of data to the concerned authority as per applicable regulation shall be installed by the Power Producer at its generation facility of the Power Project at its own cost. The Power Producer shall synchronize its system with the Grid System only after the approval of GETCO / SLDC / ALDC and GEDA. 4.1.4 The Power Producer shall immediately after each synchronization / tripping of generator, inform the sub-station of the Grid System to which the Power Project is electrically connected in accordance with applicable Grid Code. 4.1.5 The Power Producer shall commission the Project within SCOD. 4.1.6 The Power Producer shall be required to obtain Developer and/ or Transfer Permission, Key Plan drawing etc, if required, from GEDA. In cases of conversion of land from Agricultural to Non-Agriculture, the commissioning shall be taken up by GEDA only upon submission of N.A. permission by the Power Producer. 4.1.7 The Power Producer shall be required to follow the Forecasting and Scheduling procedures as per the Regulations issued by Hon’ble GERC from time to time. It is to clarify that in terms of GERC (Forecasting, Scheduling, Deviation Settlement and Related Matters of Solar and Wind Generation Sources) Regulations, 2019 the procedures for Forecasting, Scheduling & Deviation Settlment are applicable to all solar generators having combined installed capacity above 1 MW connected to the State Grid / Substation including those connected via pooling stations.

  • BUSINESS REINSURED 19 SCHEDULE B................................................................. 20

  • Contractor Key Personnel ‌ The Contractor shall assign a Corporate OASIS SB Program Manager (COPM) and Corporate OASIS SB Contract Manager (COCM) as Contractor Key Personnel to represent the Contractor as primary points-of-contact to resolve issues, perform administrative duties, and other functions that may arise relating to OASIS SB and task orders solicited and awarded under OASIS SB. Additional Key Personnel requirements may be designated by the OCO at the task order level. There is no minimum qualification requirements established for Contractor Key Personnel. Additionally, Contractor Key Personnel do not have to be full-time positions; however, the Contractor Key Personnel are expected to be fully proficient in the performance of their duties. The Contractor shall ensure that the OASIS SB CO has current point-of-contact information for both the COPM and COCM. In the event of a change to Contractor Key Personnel, the Contractor shall notify the OASIS SB CO and provide all Point of Contact information for the new Key Personnel within 5 calendar days of the change. All costs associated with Contractor Key Personnel duties shall be handled in accordance with the Contractor’s standard accounting practices; however, no costs for Contractor Key Personnel may be billed to the OASIS Program Office. Failure of Contractor Key Personnel to effectively and efficiently perform their duties will be construed as conduct detrimental to contract performance and may result in activation of Dormant Status and/or Off-Ramping (See Sections H.16. and H.17.).

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!