General Conditions (i) Each party will make each payment or delivery specified in each Confirmation to be made by it, subject to the other provisions of this Agreement.
(ii) Payments under this Agreement will be made on the due date for value on that date in the place of the account specified in the relevant Confirmation or otherwise pursuant to this Agreement, in freely transferable funds and in the manner customary for payments in the required currency. Where settlement is by delivery (that is, other than by payment), such delivery will be made for receipt on the due date in the manner customary for the relevant obligation unless otherwise specified in the relevant Confirmation or elsewhere in this Agreement.
(iii) Each obligation of each party under Section 2(a)(i) is subject to (1) the condition precedent that no Event of Default or Potential Event of Default with respect to the other party has occurred and is continuing, (2) the condition precedent that no Early Termination Date in respect of the relevant Transaction has occurred or been effectively designated and (3) each other applicable condition precedent specified in this Agreement.
Limitations on Use No part of the moneys delivered to the Recipient pursuant to Section II hereof is being or will be used to refinance, retire, redeem, or otherwise pay debt service on all or any part of any part of any governmental obligations regardless of whether the interest on such obligations is or was excluded from gross income for federal income tax purposes unless prior approval by the Director is given.
General Condition The Aircraft will:
(a) be clean by international airline standards;
(b) have installed the full complement of engines and other material equipment, parts and accessories and loose equipment required under the Agreed Maintenance Program and installed in the other Boeing/XxXxxxxxx Xxxxxxx MD-87 aircraft operated by Lessee (together with any additions and improvements thereto, or replacements thereof, effected pursuant to and in accordance with this Agreement) and be in a condition suitable for immediate operation in commercial service;
(c) be airworthy, conform to type design and be in a condition for safe operation with all equipment, components and systems operating in accordance with their intended use and within limits established by the manufacturer and approved by the Aviation Authority, and all pilot discrepancies and deferred maintenance items cleared on a terminating action basis;
(d) have a U.S. Standard Transport Category Certificate of Airworthiness issued by the FAA in accordance with FAR Part 129 (or if required by the Lessor, be eligible for a valid export certificate of airworthiness with respect to the Aircraft issued by the Aviation Authority) and unconditionally meet all FAA requirements for immediate operations under FAR Part 129;
(e) comply with the manufacturer's original specification to the extent that it so complied on the date of this Agreement and subject to any alterations made pursuant to and in accordance with this Agreement after such date;
(f) have undergone, immediately prior to redelivery, the MSG-3 equivalent of a "C" Check in accordance with the Agreed Maintenance Program so that all Airframe inspections falling due within the next 3,000 hours, 3,000 cycles or twelve months (whichever is applicable and most limiting) of operation in accordance with the Agreed Maintenance Program have been accomplished;
(g) if the Flight Hours of the Airframe remaining until the scheduled completion of the Major Checks (collectively, a "Complete Heavy Work Package") on the Expiry Date are:
(i) less than on the Delivery Date, then the Lessee shall pay to the Lessor an amount equal to the product of (a) the number of Flight Hours remaining until the scheduled completion of a Complete Heavy Work Package as of the Expiry Date that are less than the number of Flight Hours that were remaining until the scheduled completion of a Complete Heavy Work Package as of the Delivery Date (b) multiplied by US$50.00, provided, however, that no payment shall be due from -------- ------- Lessee under this clause (g)(i) if, immediately preceding the redelivery of the Aircraft, the Lessee has performed a Complete Heavy Work Package;
(ii) more than on the Delivery Date, then the Lessor shall pay to the Lessee an amount equal to the product of (a) the number of Flight Hours remaining until the scheduled completion of a Complete Heavy Work Package as of the Expiry Date that are more than the number of Flight Hours that were remaining until the scheduled completion of a Complete Heavy Work Package as of the Delivery Date (b) multiplied by US$50.00; For the avoidance of doubt, any amounts due to the Lessor pursuant to this clause (g) may be set off against any amounts due to Lessee pursuant to paragraphs (b) or (d) of Schedule 10 and a payment made for the net amount due;
(h) have complied with all airworthiness directives and mandatory orders affecting that model of Aircraft issued by the Aviation Authority (and, if different, the FAA) that are required terminating action during the Term;
(i) no special or unique manufacturer inspection or check requirements specific to the Aircraft will exist unless there is no terminating action available from any source;
(j) have installed all applicable vendor's and manufacturer's service bulletin kits received free of charge by the Lessee that are appropriate for the Aircraft and, to the extent not installed, those kits which have been received with respect to this Aircraft will be furnished free of charge to the Lessor;
(k) be free of any system-related leaks which are outside maintenance manual limitations;
(l) all fluid reservoirs (including fuel, oil, oxygen, hydraulic and water) will be full, and the waste tank serviced in accordance with the manufacturer's instructions;
(m) if required under the Approved Maintenance Program, all fuel tanks will have recently undergone an anti-fungus/biological growth contamination laboratory evaluation, and any excessive levels of contamination corrected;
(n) have an FAA-approved aging aircraft program in operation and up-to-date; and
(o) have all signs and decals clean, secure and legible.
General Conditions; Definitions 1.01. The General Conditions (as defined in the Appendix to this Agreement) constitute an integral part of this Agreement.
1.02. Unless the context requires otherwise, the capitalized terms used in this Agreement have the meanings ascribed to them in the General Conditions or in the Appendix to this Agreement.
Restrictions on Use Tenant shall use the Premises and Landlord’s Equipment in a careful, safe and proper manner, shall not commit or suffer any waste on or about Landlord’s Property or with respect to Landlord’s Equipment, and shall not make any use of Landlord’s Property and/or Landlord’s Equipment which is prohibited by or contrary to any laws, rules, regulations, orders or requirements of public authorities, or which would cause a public or private nuisance. Tenant shall comply with and obey all laws, rules, regulations, orders and requirements of public authorities which in any way affect the use or operation of Landlord’s Equipment and the use, operation or occupancy of Landlord’s Property. Tenant, at its own expense, shall obtain any and all permits, approvals and licenses necessary for use of the Landlord’s Equipment and the Premises (copies of which shall be provided to the Landlord), provided that Landlord shall be responsible for obtaining a certificate of occupancy for the Building generally (i.e., as opposed to a certificate of occupancy for the Premises after the performance of any work by Tenant, which shall be Tenant’s responsibility) and any other permits, approvals and licenses necessary generally for the use of Landlord’s Equipment and Landlord’s Property. Tenant shall not overload the floors or other structural parts of the Building; and shall not commit or suffer any act or thing on Landlord’s Property which is illegal, unreasonably offensive, unreasonably dangerous, or which unreasonably disturbs other tenants. Tenant shall not knowingly do or permit to be done any act or thing on Landlord’s Property or with Landlord’s Equipment which will invalidate or be in conflict with any insurance policies, or which will increase the rate of any insurance, covering the Building. If, because of Tenant’s failure to comply with the provisions of this Section or due to any use of the Premises or activity of Tenant in or about Landlord’s Property, the Insurance Costs are increased, Tenant shall pay Landlord the amount of such increase caused by the failure of Tenant to comply with the provisions of this Section or by the nature of Tenant’s use of the Premises. Tenant shall cause any fire lanes in the front, sides and rear of the Building to be kept free of all parking associated with its business or occupancy and in compliance with all applicable regulations. Tenant shall conduct its business at all times so as not to annoy or be offensive to other tenants and occupants in Landlord’s Property. Tenant shall not permit the emission of any objectionable noise or odor from the Premises and shall at its own cost install such extra sound proofing or noise control systems and odor control systems, as may be needed to eliminate unreasonable noise, vibrations and odors, if any, emanating from the Premises being heard, felt or smelled outside the Premises. Tenant shall not place any file cabinets bookcases, partitions, shelves or other furnishings or equipment in a location which abuts or blocks any windows.
General Restrictions on Use Advisor agrees to hold all Proprietary Information in confidence and not to, directly or indirectly, disclose, use, copy, publish, summarize, or remove from Company's premises any Proprietary Information (or remove from the premises any other property of Company), except (i) during the consulting relationship to the extent authorized and necessary to carry out Advisor's responsibilities under this Agreement, and (ii) after termination of the consulting relationship, only as specifically authorized in writing by Company. Notwithstanding the foregoing, such restrictions shall not apply to: (x) information which Advisor can show was rightfully in Advisor's possession at the time of disclosure by Company; (y) information which Advisor can show was received from a third party who lawfully developed the information independently of Company or obtained such information from Company under conditions which did not require that it be held in confidence; or (z) information which, at the time of disclosure, is generally available to the public.
GENERAL CONDITIONS OF CONTRACT (National Treasury - General Conditions of Contract (revised July 2010))
General Description of Facilities Subject to and upon the terms and conditions herein set forth, (i) the Lenders hereby establish in favor of the Borrower a revolving credit facility pursuant to which each Lender severally agrees (to the extent of such Lender’s Revolving Commitment) to make Revolving Loans to the Borrower in accordance with Section 2.2, (ii) the Issuing Bank may issue Letters of Credit in accordance with Section 2.22, (iii) the Swingline Lender may make Swingline Loans in accordance with Section 2.4, (iv) each Lender agrees to purchase a participation interest in the Letters of Credit and the Swingline Loans pursuant to the terms and conditions hereof; provided, that in no event shall the aggregate principal amount of all outstanding Revolving Loans, Swingline Loans and outstanding LC Exposure exceed the Aggregate Revolving Commitments in effect from time to time; and (v) each Lender severally agrees to make a Term Loan to the Borrower on the Closing Date in a principal amount not exceeding such Lender’s Term Loan Commitment.
General Conditions Applicable to Option to Build If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades,
(1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO;
(2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO;
(5) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same;
(6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades;
(7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1
General conditions precedent The agreement of the Finance Parties referred to in clause 2 (Agreement of the Finance Parties) shall be further subject to:
(a) the representations and warranties in clause 4 (Representations and warranties) being true and correct on the Effective Date as if each was made with respect to the facts and circumstances existing at such time; and
(b) no Event of Default or Default having occurred and continuing at the time of the Effective Date.
