Implementation of Annex Sample Clauses

Implementation of Annex. Each of the Hashemite Kingdom of Jordan and the State of Israel shall take all measures necessary to implement this Annex. The list sets out the conditions required for all products to be considered as sufficiently worked or processed within the meaning of Article 6 of the Protocol. 2.1. The first two columns in the list describe the product obtained. The first column gives the heading number or chapter number used in the Harmonized System and the second column gives the description of goods used in that system for that heading or chapter. For each entry in the first two columns, a rule is specified in column 3 or 4. Where, in some cases, the entry in the first column is preceded by an "ex", this signifies that the rules in column 3 or 4 apply only to the part of that heading as described in column 2. 2.2. Where several heading numbers are grouped together in column 1 or a chapter number is given and the description of products in column 2 is therefore given in general terms, the adjacent rules in column 3 or 4 apply to all products which, under the Harmonized System, are classified in headings of the chapter or in any of the headings grouped together in column 1. 2.3. Where there are different rules in the list applying to different products within a heading, each indent contains the description of that part of the heading covered by the adjacent rules in column 3 or 4. 2.4. Where, for an entry in the first two columns, a rule is specified in both columns 3 and 4, the exporter may opt, as an alternative, to apply either the rule set out in column 3 or that set out in column 4. If no origin rule is given in column 4, the rule set out in column 3 is to be applied. 3.1. The provisions of Article 6 of the Protocol, concerning products having acquired originating status which are used in the manufacture of other products, shall apply, regardless of whether this status has been acquired inside the factory where these products are used or in another factory in a contracting party. An engine of heading 8407, for which the rule states that the value of the non-originating materials which may be incorporated may not exceed 40 % of the ex-works price, is made from "other alloy steel roughly shaped by forging" of heading ex 7224. If this forging has been forged in the Community from a non-originating ingot, it has already acquired originating status by virtue of the rule for heading ex 7224 in the list. The forging can then count as originating in the value-calculati...
AutoNDA by SimpleDocs
Implementation of Annex. The Parties shall take all measures necessary to implement this Annex. The invoice declaration, the text of which is given below, must be made out in accordance with the footnotes. However, the footnotes do not have to be reproduced. The exporter of the products covered by this document (customs authorization No. … (1)) declares that, except where otherwise clearly indicated, these products are of Israeli/Jordanian preferential origin (2). ………………………………………………………………..…(Place and date) (3) …………………………………………………………………………………….…(4) (Signature of the exporter; in addition the name of the person signing the declaration has to be indicated in clear script). (1) When the invoice declaration is made out by an approved exporter within the meaning of Article 10 of the Protocol, the authorization number of the approved exporter must be entered in this space. When the invoice declaration is not made out by an approved exporter, the words in brackets shall be omitted or the space left blank. (2) The origin of the products is to be indicated. (3) These indications may be omitted if the information is contained on the document itself. (4) See Article 9(b)
Implementation of Annex. The Parties shall take all measures necessary to implement this Annex.

Related to Implementation of Annex

  • Implementation of Agreement Each Party must promptly execute all documents and do all such acts and things as is necessary or desirable to implement and give full effect to the provisions of this Agreement.

  • Implementation of Changes If Tenant: (i) approves in writing the cost or savings and the estimated extension in the time for completion of Landlord’s Work, if any, and (ii) deposits with Landlord any Excess TI Costs required in connection with such Change, Landlord shall cause the approved Change to be instituted. Notwithstanding any approval or disapproval by Tenant of any estimate of the delay caused by such proposed Change, the TI Architect’s determination of the amount of Tenant Delay in connection with such Change shall be final and binding on Landlord and Tenant.

  • Implementation of the Agreement Regulations of this Agreement relating to investments who investors of one Contracting Party realized before or after the entry into force of this Agreement, with what shall apply from the moment of its entry into force, provided that such investments conducted in accordance with the laws of that Party Contracting.

  • Implementation of and Reporting on the Project A. The Grantee shall implement and complete the Project in accordance with Exhibit A and with the plans and specifications contained in its Grant Application, which is on file with the State and is incorporated by reference. Modification of the Project shall require prior written approval of the State. B. The Grantee shall submit to the State written progress reports until the completion of the Project. These reports shall be submitted upon request by the State and shall contain such detail of progress or performance on the Project as is requested by the State.

  • Implementation Report Within 150 days after the Effective Date, Ensign Group shall submit a written report to OIG summarizing the status of its implementation of the requirements of this CIA (Implementation Report). The Implementation Report shall, at a minimum, include: 1. the name, address, phone number, and position description of the Compliance Officer required by Section III.A, and a summary of other noncompliance job responsibilities the Compliance Officer may have; 2. the names and positions of the members of the Compliance Committee required by Section III.A; 3. the names and positions of the members of the Board of Directors who are responsible for satisfying the Board of Directors compliance obligations described in Section III.A.3; 4. a copy of Ensign Group’s Code of Conduct required by Section III.B.1; 5. the number of individuals required to complete the Code of Conduct certification required by Section III.B.1, the percentage of individuals who have completed such certification, and an explanation of any exceptions (the documentation supporting this information shall be available to OIG upon request); 6. a summary of all Policies and Procedures required by Section III.B (copies of the Policies and Procedures shall be made available to OIG upon request); 7. the following information regarding each type of training required by Section III.C: a. a description of such training, including a summary of the topics covered, the length of sessions, and a schedule of training sessions; b. the number of individuals required to be trained, percentage of individuals actually trained, and an explanation of any exceptions. A copy of all training materials and the documentation supporting this information shall be made available to OIG upon request. 8. a description of the Disclosure Program required by Section III.E; 9. the following information regarding the IRO(s): (a) identity, address, and phone number; (b) a copy of the engagement letter; (c) information to demonstrate that the IRO has the qualifications outlined in Appendix A to this CIA; (d) a summary and description of any and all current and prior engagements and agreements between Ensign Group and the IRO; and (e) a certification from the IRO regarding its professional independence and objectivity with respect to Ensign Group; 10. a description of the process by which Ensign Group fulfills the requirements of Section III.F regarding Ineligible Persons; 11. a list of all of Ensign Group’s locations (including locations and mailing addresses); the corresponding name under which each location is doing business; the corresponding phone numbers and fax numbers; each location’s Medicare and state Medicaid program provider number and/or supplier number(s); and the name and address of each Medicare and state Medicaid program contractor to which Ensign Group currently submits claims; 12. a description of Ensign Group’s corporate structure, including identification of any parent and sister companies, subsidiaries, and their respective lines of business; and

  • Implementation Plan The Authority shall cause to be prepared an Implementation Plan meeting the requirements of Public Utilities Code Section 366.2 and any applicable Public Utilities Commission regulations as soon after the Effective Date as reasonably practicable. The Implementation Plan shall not be filed with the Public Utilities Commission until it is approved by the Board in the manner provided by Section 4.9.

  • Amendments to Servicing Agreements, Modification of Standard Provisions (a) Subject to the prior written consent of the Trustee pursuant to Section 3.07(b), the Master Servicer from time to time may, to the extent permitted by the applicable Servicing Agreement, make such modifications and amendments to such Servicing Agreement as the Master Servicer deems necessary or appropriate to confirm or carry out more fully the intent and purpose of such Servicing Agreement and the duties, responsibilities and obligations to be performed by the Servicer thereunder. Such modifications may only be made if they are consistent with the REMIC Provisions, as evidenced by an Opinion of Counsel. Prior to the issuance of any modification or amendment, the Master Servicer shall deliver to the Trustee such Opinion of Counsel and an Officer's Certificate setting forth (i) the provision that is to be modified or amended, (ii) the modification or amendment that the Master Servicer desires to issue and (iii) the reason or reasons for such proposed amendment or modification. (b) The Trustee shall consent to any amendment or supplement to a Servicing Agreement proposed by the Master Servicer pursuant to Section 3.07(a), which consent and amendment shall not require the consent of any Certificateholder if it is (i) for the purpose of curing any mistake or ambiguity or to further effect or protect the rights of the Certificateholders or (ii) for any other purpose, provided such amendment or supplement for such other purpose cannot reasonably be expected to adversely affect Certificateholders. The lack of reasonable expectation of an adverse effect on Certificateholders may be established through the delivery to the Trustee of (i) an Opinion of Counsel to such effect or (ii) written notification from each Rating Agency to the effect that such amendment or supplement will not result in reduction of the current rating assigned by that Rating Agency to the Certificates. Notwithstanding the two immediately preceding sentences, the Trustee may, in its discretion, decline to enter into or consent to any such supplement or amendment if its own rights, duties or immunities shall be adversely affected. (i) Notwithstanding anything to the contrary in this Section 3.07, the Master Servicer from time to time may, without the consent of any Certificateholder or the Trustee, enter into an amendment (A) to an Other Servicing Agreement for the purpose of (i) eliminating or reducing Month End Interest and (ii) providing for the remittance of Full Unscheduled Principal Receipts by the applicable Servicer to the Master Servicer not later than the 24th day of each month (or if such day is not a Business Day, on the previous Business Day) or (B) to the WFHM Servicing Agreement for the purpose of changing the applicable Remittance Date to the 18th day of each month (or if such day is not a Business Day, on the previous Business Day). (ii) The Master Servicer may direct WFHM to enter into an amendment to the WFHM Servicing Agreement for the purposes described in Sections 3.07(c)(i)(B) and 10.01(b)(iii).

  • MODIFICATION OF CONTRACT TERMS The terms and conditions set forth in the Contract shall govern all transactions by Authorized User(s) under this Contract. The Contract may only be modified or amended upon mutual written agreement of the Commissioner and Contractor. The Contractor may, however, offer Authorized User(s) more advantageous pricing, payment, or other terms and conditions than those set forth in the Contract. In such event, a copy of such terms shall be furnished to the Authorized User(s) and Commissioner by the Contractor at the time of such offer. Other than where such terms are more advantageous for the Authorized User(s) than those set forth in the Contract, no alteration or modification of the terms of the Contract, including substitution of Product, shall be valid or binding against Authorized User(s) unless authorized by the Commissioner or specified in the Contract Award Notification. No such alteration or modification shall be made by unilaterally affixing such terms to Product upon delivery (including, but not limited to, attachment or inclusion of standard pre-printed order forms, product literature, “shrink wrap” terms accompanying software upon delivery, or other documents) or by incorporating such terms onto order forms, purchase orders or other documents forwarded by the Contractor for payment, notwithstanding Authorized User’s subsequent acceptance of Product, or that Authorized User has subsequently processed such document for approval or payment.

  • Project Implementation Manual The Recipient, through the PCU, shall: (i) take all action required to carry out Parts 1.1, 1.3, 1.4, 2, 3.1(b), 3.2, 3.3 and 4 (ii) of the Project in accordance with the provisions and requirements set forth or referred to in the Project Implementation Manual; (ii) submit recommendations to the Association for its consideration for changes and updates of the Project Implementation Manual as they may become necessary or advisable during Project implementation in order to achieve the objective of Parts 1.1, 1.3, 1.4, 2, 3.1(b), 3.2, 3.3 and 4(ii) of the Project; and (iii) not assign, amend, abrogate or waive the Project Implementation Manual or any of its provisions without the Association’s prior agreement. Notwithstanding the foregoing, if any of the provisions of the Project Implementation Manual is inconsistent with the provisions of this Agreement, the provisions of this Agreement shall prevail and govern.

  • Modification of Schedules The Parties shall, upon written request by a Party, hold consultations to consider any modification or withdrawal of a specific commitment in the requesting Party’s Schedule of specific commitments. The consultations shall be held within three months after the requesting Party made its request. In the consultations, the Parties shall aim to ensure that a general level of mutually advantageous commitments no less favourable to trade than that provided for in the Schedule of specific commitments prior to such consultations is maintained. Modifications of Schedules are subject to the procedures set out in Articles 7.1 and 9.6

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!