Landscape Harvest Block Planning Sample Clauses

Landscape Harvest Block Planning a. Specific consideration should be given to the orientation, size and shape of the harvest block to minimize the effects of wind damage on riparian management areas. b. Retention of structure in riparian management areas should be planned in conjunction with retention in the remainder of the harvest block. c. The number of crossings for intermittent streams should be minimized. d. Harvesting in Riparian Management Areas should be conducted in conjunction with harvesting the adjacent non-RMA portion of the harvest block. 1. To ensure a safe work environment for all employees, contractors and the public. 2. To responsibly manage activities to protect and maintain water quality, air quality and the productivity and quality of forest soils. Weyerhaeuser Prince Xxxxxx (p. 17 of the Twenty-Year Forest Management Plan and Environmental Impact Assessment Summary Document): – A safe working environment for all employees, contractors and the public. – Manage activities to protect and maintain water quality in FMA area lakes and rivers. – Maintain diversity and quality of riparian habitats. – Maintain productivity of forest soils except on areas needed for permanent roads or other permanent infrastructure. – Meet contractual and legal obligations. The following permits shall be obtained by a licensee for the work or conditions indicated in Table 1 below: Table 1 – PERMITS Temporary Work Camp Permit (TWCP) For camps (whether identified in approved Operating Plans or not) in which vehicles, tents or other structures are to be assembled or set up to provide accommodation for personnel or for other purposes in connection with work projects of a non-permanent nature. Burning Permit (associated with both the Prairie and Forest Fires Act and Clean Air Act) When burning paper and wood during fire season. Permission to draw water (associated with the Water Corporation Act, and the Federal Fisheries Act). An Aquatic Habitat Protection Permit may also be required to draw water (under the Environmental Management and Protection Act). When drawing water from a known source or established drilled well for washing facilities. An Aquatic Habitat Protection Permit is required when working in or near water bodies. Permission to retain camp structures in place for future use (Lease– available through the local Lands Manager) When leaving camp structures in place for future use.
AutoNDA by SimpleDocs
Landscape Harvest Block Planning a. Specific consideration should be given to the orientation, size and shape of the harvest block to minimize the effects of wind damage on riparian management areas. b. Retention of structure in riparian management areas should be planned in conjunction with retention in the remainder of the harvest block. c. The number of crossings for intermittent streams should be minimized. d. Harvesting in Riparian Management Areas should be conducted in conjunction with harvesting the adjacent non-RMA portion of the harvest block. 1. To ensure a safe work environment for all employees, contractors and the public. 2. To responsibly manage activities to protect and maintain water quality, air quality and the productivity and quality of forest soils. Weyerhaeuser Prince Xxxxxx (p. 17 of the Twenty-Year Forest Management Plan and Environmental Impact Assessment Summary Document): • A safe working environment for all employees, contractors and the public. • Manage activities to protect and maintain water quality in FMA area lakes and rivers. • Maintain diversity and quality of riparian habitats. • Maintain productivity of forest soils except on areas needed for permanent roads or other permanent infrastructure. • Meet contractual and legal obligations The following permits shall be obtained by a licensee for the work or conditions indicated in Table 1 below.

Related to Landscape Harvest Block Planning

  • Transition Planning The AGENCY will be responsible for the development of the student’s Transition Plan, which begins upon entry and is completed prior to the student’s exit.

  • Information Systems Acquisition Development and Maintenance a. Client Data – Client Data will only be used by State Street for the purposes specified in this Agreement.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If CSTC chooses to subtend a Verizon access Tandem, CSTC’s NPA/NXX must be assigned by CSTC to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG. 9.2.2 CSTC shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from CSTC’s Customers. 9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office CSTC utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA. 9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow CSTC’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.

  • Procurement Planning Prior to the issuance of any invitations to bid for contracts, the proposed procurement plan for the Project shall be furnished to the Association for its review and approval, in accordance with the provisions of paragraph 1 of Appendix 1 to the Guidelines. Procurement of all goods and works shall be undertaken in accordance with such procurement plan as shall have been approved by the Association, and with the provisions of said paragraph 1.

  • Business Continuity Planning Supplier shall prepare and maintain at no additional cost to Buyer a Business Continuity Plan (“BCP”). Upon written request of Buyer, Supplier shall provide a copy of Supplier’s BCP. The BCP shall be designed to ensure that Supplier can continue to provide the goods and/or services in accordance with this Order in the event of a disaster or other BCP-triggering event (as such events are defined in the applicable BCP). Supplier’s BCP shall, at a minimum, provide for: (a) the retention and retrieval of data and files; (b) obtaining resources necessary for recovery, (c) appropriate continuity plans to maintain adequate levels of staffing required to provide the goods and services during a disruptive event; (d) procedures to activate an immediate, orderly response to emergency situations; (e) procedures to address potential disruptions to Supplier’s supply chain; (f) a defined escalation process for notification of Buyer, within two (2) business days, in the event of a BCP-triggering event; and (g) training for key Supplier Personnel who are responsible for monitoring and maintaining Supplier’s continuity plans and records. Supplier shall maintain the BCP and test it at least annually or whenever there are material changes in Supplier’s operations, risks or business practices. Upon Xxxxx’s written and reasonable request, Supplier shall provide Buyer an executive summary of test results and a report of corrective actions (including the timing for implementation) to be taken to remedy any deficiencies identified by such testing. Upon Xxxxx’s request and with reasonable advance notice and conducted in such a manner as not to unduly interfere with Supplier’s operations, Supplier shall give Buyer and its designated agents access to Supplier’s designated representative(s) with detailed functional knowledge of Supplier’s BCP and relevant subject matter.

  • Selection Planning Prior to the issuance to consultants of any requests for proposals, the proposed plan for the selection of consultants under the Project shall be furnished to the Association for its review and approval, in accordance with the provisions of paragraph 1 of Appendix 1 to the Consultant Guidelines. Selection of all consultants’ services shall be undertaken in accordance with such selection plan as shall have been approved by the Association, and with the provisions of said paragraph 1.

  • Dewatering (a) Where the whole of a site is so affected by surface water following a period of rain that all productive work is suspended by agreement of the Parties, then dewatering shall proceed as above with Employees so engaged being paid at penalty rates as is the case for safety rectification work. This work is typically performed by Employees engaged within CW1, CW2 or CW3 classifications. When other Employees are undertaking productive work in an area or areas not so affected then dewatering will only attract single time rates. (b) Where a part of a site is affected by surface water following a period of rain, thus rendering some areas unsafe for productive work, consistent with the Employer’s obligations under the OH&S Act, appropriate Employees shall assist in the tidying up of their own work site or area if it is so affected. Where required, appropriate Employees will be provided with the appropriate PPE. Such work to be paid at single time rates. Productive work will continue in areas not so affected. (c) To avoid any confusion any ‘dewatering’ time which prevents an Employee from being engaged in their normal productive work is not included in any calculation for the purposes of determining whether an Employee is entitled to go home due to wet weather (refer clauses 32.4 and 32.5)

  • Configuration Management The Contractor shall maintain a configuration management program, which shall provide for the administrative and functional systems necessary for configuration identification, control, status accounting and reporting, to ensure configuration identity with the UCEU and associated cables produced by the Contractor. The Contractor shall maintain a Contractor approved Configuration Management Plan that complies with ANSI/EIA-649 2011. Notwithstanding ANSI/EIA-649 2011, the Contractor’s configuration management program shall comply with the VLS Configuration Management Plans, TL130-AD-PLN-010-VLS, and shall comply with the following:

  • Infrastructure Infrastructure serves as the foundation and building blocks of an integrated IT solution. It is the hardware which supports Application Services (C.3.2) and IT Management Services (C.3.3); the software and services which enable that hardware to function; and the hardware, software, and services which allow for secure communication and interoperability between all business and application service components. Infrastructure services facilitate the development and maintenance of critical IT infrastructures required to support Federal government business operations. This section includes the technical framework components that make up integrated IT solutions. One or any combination of these components may be used to deliver IT solutions intended to perform a wide array of functions which allow agencies to deliver services to their customers (or users), whether internal or external, in an efficient and effective manner. Infrastructure includes hardware, software, licensing, technical support, and warranty services from third party sources, as well as technological refreshment and enhancements for that hardware and software. This section is aligned with the FEA/DoDEA Technical Reference Model (TRM) which describes these components using a vocabulary that is common throughout the entire Federal government. A detailed review of the TRM is provided in Section J, Attachment 5. Infrastructure includes complete life cycle support for all hardware, software, and services represented above, including planning, analysis, research and development, design, development, integration and testing, implementation, operations and maintenance, information assurance, and final disposition of these components. The services also include administration and help desk functions necessary to support the IT infrastructure (e.g., desktop support, network administration). Infrastructure components of an integrated IT solution can be categorized as follows:

  • Project Planning GOVERNMENTAL APPROVALS; ENVIRONMENTAL COMPLIANCE; PUBLIC INFORMATION 30 4.1 Planning and Engineering Activities 30 4.2 Site Conditions 30 4.3 Governmental Approvals 30 4.4 Environmental Compliance 34 4.5 Community Outreach and Public Information 35

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!