LICENSE IN COMMERCIAL MATERIAL Sample Clauses

LICENSE IN COMMERCIAL MATERIAL. As used in this section, "Commercial Material" means anything that has been developed at private expense by the Contractor or a third party, commercially available in the marketplace, subject to intellectual property rights, and readily copy able through duplication on magnetic media, paper, or other media. Examples include the written reports, books, pictures, videos, movies, computer programs, and computer source code and documentation. Any commercial Material that the Contractor intends to deliver as a Deliverable must have the scope of the license granted in such material disclosed in Exhibit 1 or as an attachment referenced in Exhibit 1, if that scope of license is different than the scope of license contained in this section for Commercial Materials. Except for Commercial Material that is software ("Commercial Software"), if the Commercial Material is copyrighted and published material, then the State will have the rights permitted under the Federal copyright laws for each copy of the Commercial Material delivered to it by the Contractor. Except for Commercial Software, if the Commercial Material is patented, then the State will have the rights permitted under the Federal patent laws for each copy of the Commercial Material delivered to it by the Contractor. For Commercial Software, the State will have the perpetual rights in item (1) through (8) of this section or as expressly stated otherwise in this Contract. The Commercial Software may be: 1. Used or copied for use in or with the computer or computers for which it was acquired, including use at any State installation to which such computer or computers may be transferred. 2. Used or copied for use in with a backup computer for disaster recovery and disaster recovery testing purposes or if any computer for which it was acquired is inoperative. 3. Reproduced for safekeeping (archives) or backup purposes. 4. Modified, adapted, or combined with other computer software, provided that the modified, combined, or adapted portions of the derivative software incorporating any of the Commercial Software will be subject to same restrictions on use. 5. Disclosed to and reproduced for use on behalf of the State by support service contractors or their subcontractors, subject to the same restrictions on use; and 6. Used or copied for use in or transferred to a replacement computer. However: 7. If Commercial Software delivered under this Contract is published and copyrighted, it is licensed to the State without d...
Sample 1Sample 2Sample 3See All (11)
LICENSE IN COMMERCIAL MATERIAL. ACT believes that its standard Terms and Conditions for its off-the- shelf products appended as Exhibits hereto are more appropriate to its products than this provision of the Contract. ACT therefore requests that, if its Terms and Conditions are incorporated into the Contract, this section be deleted. Alternatively, if ACT’s Terms and Conditions are not incorporated, ACT requests that references to Commercial Software be deleted from this section, as they are inapplicable to its proposal.
Sample 1
LICENSE IN COMMERCIAL MATERIAL. As used in this section, "Commercial Material" means anything that has been developed at private expense by the Contractor or a third party, commercially available in the marketplace, subject to intellectual property rights, and readily copyable through duplication on magnetic media, paper, or other media. Examples include the written reports, books, pictures, videos, movies, computer programs, and computer source code and documentation.
Sample 1
LICENSE IN COMMERCIAL MATERIAL. As used in this section, "Commercial Material" means anything that has been developed at private expense by the Contractor or a third party, commercially available in the marketplace, subject to intellectual property rights, and readily copy able through duplication on magnetic media, paper, or other media. Examples include the written reports, books, pictures, videos, movies, computer programs, and computer source code and documentation. Any commercial Material that the Contractor intends to deliver as a Deliverable must have the scope of the license granted in such material disclosed in Exhibit 1 or as an attachment referenced in Exhibit 1, if that scope of license is different than the scope of license contained in this section for Commercial Materials. Except for Commercial Material that is software ("Commercial Software"), if the Commercial Material is copyrighted and published material, then the State will have the rights permitted under the Federal copyright laws for each copy of the Commercial Material delivered to it by the Contractor. Except for Commercial Software, if the Commercial Material is patented, then the State will have the rights permitted under the Federal patent laws for each copy of the Commercial Material delivered to it by the Contractor. For Commercial Software, i f a firmware update is made available by Contractor, it will be provided to the State at no additional charge.
Sample 1

Related to LICENSE IN COMMERCIAL MATERIAL

  • Licensed Product The term “Licensed Product” shall mean any product (a) the manufacture, use, importation, sale or offer for sale of which would, in the absence of the license granted by this Agreement, infringe a Valid Claim of any of the Licensed Patent Rights, or (b) that is comprised of, utilizes or incorporates Licensed Biological Materials, or (c) that is discovered, developed or made using a Licensed Process.

  • SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.

  • Technical Information The Employer agrees to provide to the Union such information that is available relating to employees in the bargaining unit, as may be required by the Union for collective bargaining purposes.

  • Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.

  • Manufacturing Technology Transfer Except as the Committee ------------ --------------------------------- may otherwise agree in writing, in order to effectuate an orderly transition of the uninterrupted availability of Product to LILLY for purposes contemplated under this Agreement, MEGABIOS, at least ninety (90) days prior to completion of the Project or completion of Phase I Clinical Trials, whichever is earlier, shall transfer to LILLY all information and instructions concerning the manufacturing process and related matters in MEGABIOS' possession which may be necessary for LILLY to manufacture Product (including information regarding obtaining necessary Lipids related thereto) for clinical trials and commercialization as contemplated hereunder including, but not limited to, analytical and manufacturing methods. MEGABIOS shall also provide assistance (in the form of consultation) to LILLY with respect to manufacturing matters for a period of [ * ] months after completion of the initial transfer of information and instructions as provided below. Such transfer and assistance by MEGABIOS will be referred to herein as the "Manufacturing Transfer." All such information, methods and instructions transferred to LILLY under this Section 4.3 shall be referred to herein as the "Manufacturing Information," and shall be maintained in confidence by LILLY pursuant to Section 7.1, except that LILLY's obligation to maintain in confidence such Manufacturing Information shall survive for ten (10) years following expiration or termination of this Agreement. LILLY agrees that it will use all such transferred Manufacturing Information only for the manufacture of the Products and shall not disclose or transfer such Manufacturing Information to any third party manufacturer except as provided in Section 2.10. MEGABIOS shall provide, and bear its costs for, up to [ * ] FTEs for a period of up to [ * ] months [ * ] in aggregate) to accomplish the Manufacturing Transfer. Such FTEs, at LILLY's request, shall include visits to LILLY's facilities by MEGABIOS personnel including up to [ * ] from MEGABIOS' head of manufacturing. MEGABIOS shall furnish any additional reasonable assistance beyond the assistance described above regarding manufacturing matters that LILLY may request and that MEGABIOS is able to provide, for up to [ * ] after the initial transfer of Manufacturing Information, providing that LILLY [ * ] incurred with respect to such additional assistance.

  • Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.

  • Patent Rights The State and the U. S. Department of Transportation shall have the royalty free, nonexclusive and irrevocable right to use and to authorize others to use any patents developed by the Engineer under this contract.

  • Licensed Patents Immune Design, at its expense, shall have the first right to file, prosecute and maintain all Licensed Patents for which Immune Design has any exclusive rights under this Agreement using patent counsel reasonably approved by IDRI, including conducting any interferences, reexaminations, reissues, oppositions, or request for patent term extension relating thereto. Immune Design shall conduct such filing, prosecution and maintenance in good faith, taking into consideration IDRI’s retained rights hereunder, and consistent with reasonable business judgment, provide IDRI with all relevant or material documentation and proposed filing in the Territory so that IDRI may be concurrently and promptly informed of the continuing prosecution, and consult with IDRI with regards to Immune Design’s patent strategy with the Licensed Patents for which Immune Design has any exclusive rights under this Agreement. Licensed Patents in the name of IDRI shall remain in the name of IDRI. Immune Design shall use commercially reasonable efforts to ***, as applicable. To the extent such ***, Immune Design shall provide IDRI reasonable opportunity to review and comment on such prosecution efforts regarding such Licensed Patents in the Territory, and any IDRI comments will be reasonably considered in such prosecution efforts, and included to the extent affecting the IDRI Exclusive Field or IDRI Territory, as the case may be. If Immune Design determines in its sole discretion to abandon or not maintain any Licensed Patent for which Immune Design has any exclusive rights under this Agreement in the Territory, then Immune Design shall promptly provide IDRI with written notice of such determination at least sixty (60) days before any deadline for taking action to avoid abandonment and shall provide IDRI with the right, opportunity and reasonable assistance to prepare, file, prosecute and maintain such Licensed Patent in the applicable jurisdiction in IDRI’s sole discretion and at IDRI’s expense, provided that Immune Design shall provide such reasonable assistance at its own costs and expenses. If IDRI elects to prepare, file, prosecute and maintain such Licensed Patent in such jurisdiction for which Immune Design has any exclusive rights, then Immune Design’s license rights to such Licensed Patent in such country will become nonexclusive in such country under such Licensed Patent (and/or patent application). If IDRI desires Immune Design to file, in a particular jurisdiction, a Licensed Patent for which Immune Design has any exclusive rights under this Agreement that claims priority to another Licensed Patent for which Immune Design has any exclusive rights under this Agreement, IDRI shall provide written notice to Immune Design requesting that Immune Design file such patent application in such jurisdiction. If IDRI provides such written notice to Immune Design, Immune Design shall either (i) file and prosecute such patent application and maintain any patent issuing thereon in such jurisdiction and the Parties shall share the related costs and expenses (A) in countries *** on the basis of *** percent (***%) Immune Design: *** percent (***%) IDRI or (B) in countries within the IDRI Territory equally; or (ii) notify IDRI that Immune Design does not desire to file such patent application in such jurisdiction and provide IDRI with the opportunity to file and prosecute such patent application, provided that if IDRI files and prosecutes such patent application in such jurisdiction, then Immune Design’s license rights to such License Patent in such country will become nonexclusive in such country under such Licensed GLA Patent (and/or patent application). Immune Design shall be responsible for the costs and expenses incurred in connection with its own activities for filing, prosecuting and maintaining the Licensed Patents; IDRI shall be responsible for monitoring of such activities by IDRI.

  • Product Information EPIZYME recognizes that by reason of, inter alia, EISAI’s status as an exclusive licensee in the EISAI Territory under this Agreement, EISAI has an interest in EPIZYME’s retention in confidence of certain information of EPIZYME. Accordingly, until the end of all Royalty Term(s) in the EISAI Territory, EPIZYME shall keep confidential, and not publish or otherwise disclose, and not use for any purpose other than to fulfill EPIZYME’s obligations, or exercise EPIZYME’s rights, hereunder any EPIZYME Know-How Controlled by EPIZYME or EPIZYME Collaboration Know-How, in each case that are primarily applicable to EZH2 or EZH2 Compounds (the “Product Information”), except to the extent (a) the Product Information is in the public domain through no fault of EPIZYME, (b) such disclosure or use is expressly permitted under Section 9.3, or (c) such disclosure or use is otherwise expressly permitted by the terms and conditions of this Agreement. For purposes of Section 9.3, each Party shall be deemed to be both the Disclosing Party and the Receiving Party with respect to Product Information. For clarification, the disclosure by EPIZYME to EISAI of Product Information shall not cause such Product Information to cease to be subject to the provisions of this Section 9.2 with respect to the use and disclosure of such Confidential Information by EPIZYME. In the event this Agreement is terminated pursuant to Article 12, this Section 9.2 shall have no continuing force or effect, but the Product Information, to the extent disclosed by EPIZYME to EISAI hereunder, shall continue to be Confidential Information of EPIZYME, subject to the terms of Sections 9.1 and 9.3 for purposes of the surviving provisions of this Agreement. Each Party shall be responsible for compliance by its Affiliates, and its and its Affiliates’ respective officers, directors, employees and agents, with the provisions of Section 9.1 and this Section 9.2.

  • Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.