Light sources Sample Clauses

Light sources. 4.3.1. In the case of replaceable light source(s): 4.3.1.1. The lamp shall only be equipped with light source(s) approved according to UN Regulation No. 37 and/or UN Regulation No. 128, provided that no restriction on the use is made in UN Regulation No. 37 and its series of amendments in force at the time of application for type approval or in UN Regulation No. 128 and its series of amendments in force at the time of application for type approval. 4.3.1.2. In the case of a light source category or categories or type(s) is restricted for use in lamps on vehicles in use and originally equipped with such lamps, the applicant for type approval of the lamp shall declare that the lamp is only intended for installation on those vehicles; this shall be noted in the communication form in Annex 1. 4.3.1.3. The design of the lamp shall be such that the light source(s) can be fixed in no other position but the correct one. 4.3.1.4. The light source(s) holder shall conform to the characteristics given in IEC Publication 60061. The holder data sheet relevant to the category of light source(s) used, applies. 4.3.2. In the case of light source modules, it shall be checked that: 4.3.2.1. The design of the light source module(s) shall be such as: (a) That each light source module can only be fitted in no other position than the designated and correct one and can only be removed with the use of tool(s); (b) If there are more than one light source module used in the housing for a lamp, light source modules having different characteristics cannot be interchanged within the same lamp housing. 4.3.2.2. The light source module(s) shall be tamperproof. 4.3.2.3. A light source module shall be so designed that regardless of the use of tool(s), it shall not be mechanically interchangeable with any replaceable approved light source. 4.3.2.4. In the case of non-replaceable filament light source(s) or light source module(s) equipped with non-replaceable filament light source(s), the applicant shall annex to the type approval documentation a report, acceptable to the Authority responsible for type approval, that demonstrates compliance of these non-replaceable filament light source(s) with the requirements as specified in paragraph 4.11 of IEC 60809, Edition 3.

Light sources. The transfer price from PDTI to P&U shall be ***** of PDTI's list price.

Light sources. 4.5.1 In the case of replaceable light sources: 4.5.1.1. The lamp shall only be equipped with light source(s) approved according to UN Regulations Nos. 37, 99 and/or 128, provided that no restriction on the use is made in UN Regulation No. 37 and its series of amendments in force at the time of application for type approval or in UN Regulation No. 99 and its series of amendments in force at the time of application for type approval or in UN Regulation No. 128 and its series of amendments in force at the time of application for type approval. … 4.5.1.2. In case a light source category or categories or type(s) is restricted for use in lamps on vehicles in use and originally equipped with such lamps, the applicant for type approval of the lamp shall declare that the lamp is only intended for installation on those vehicles; this shall be noted in the communication form 4.5.1.3. The design of the lamp shall be such that the light source(s) can be fixed in no other position but the correct one.

Light sources. The CV8000 is a fully automated imaging platform for confocal, bright field, epifluorescent and phase contract imaging. Standard excitation lasers are 405, 488, 561 and 640 nm. A laser for FRET (445nm) excitation is also included. Bright field and phase contrast imaging use the LED white light source. There is also a Fully incubated stage with humidity control (maximum 85% rH), temperature control (from ambient +5°C - 40°C) and CO2 control. Enables live cell imaging for up to 72 hours (3 days). The CV8000 provides both laser-based autofocus and image-based autofocus. Capable of imaging 6, 12, 24, 48, 96, 384 and 1536-well microplates, as well as microscope slides with a slide holder (included).

Light sources. 4.3.1 In the case of replaceable light source(s): 4.3.1.1 Any category or categories of light source(s) approved according to UN Regulation No. 37 and/or UN Regulation No. 128 may be used, provided that no restriction on the use is made in UN Regulation No. 37 and its series of amendments in force at the time of application for type approval or in UN Regulation No. 128 and its series of amendments in force at the time of application for type approval.

Light sources. 5.8.1. The gas-discharge light source(s) used in gas-discharge headlamps shall be replaceable and approved according to Regulation No. 99 and its series of amendments in force at the time of application for type approval. 5.8.2. In the case that one or more (additional) filament light sources are used in the gas-discharge headlamp, these filament light sources shall be replaceable and approved according to Regulation No. 37 and its series of amendments in force at the time of application for type approval, provided that no restriction on the use is made in Regulation No. 37 and its series of amendments in force at the time of application for type approval. 5.8.3. In the case that one or more (additional) LED light sources are used in the gas-discharge headlamp, these LED light sources shall be approved according to Regulation No. 128 and its series of amendments in force at the time of application for type approval, provided that no restriction on the use is made in Regulation No. 128 and its series of amendments in force at the time of application for type approval. 5.8.4. In case that one or more (additional) LED modules are used in the gas- discharge headlamp, these LED modules shall be replaceable or non- replaceable.

Light sources. Source of visible light using a self-regulating power supply capable of operating at 110 volts/60 Hz or 220 volts/50 Hz. - Portable (not to exceed 10 kg). - Noise level [less than] TBD dB at TBD meters on all sides. - Provides visible light (470-520 nm wavelength range) at 400 milliwatts minimum output bandwidth at factory set duration of 40 seconds. - Maximum delay of 0.1 seconds between pulses. - Surgeon control allows mid-cycle light shut-off. - Customer Replaceable, self-aligning lamp. - Target Cost of Goods with overhead: [less than or equal to]$3,258 each (assuming > 300 units/year). - Optical/electrical connector is easy to inert and remove, but difficult to inadvertently remove. - The light source is packaged non-sterile. - Passes EN60601 ISO standard for earth ground and leakage current.

Light sources