Load cell positions Sample Clauses

Load cell positions. Fit load cell 1 to the outboard position as shown Figure 1. Install the Enhanced Child Restraint System in the correct position. If a lock-off device is fitted to the Enhanced Child Restraint System and acts upon the diagonal belt, place load cell 2 at a convenient position behind the Enhanced Child Restraint System between the lock-off device and the buckle as shown above. If no lock-off device is fitted or if the lock-off device is fitted at the buckle, position the load cell at a convenient position between the pillar loop and the Enhanced Child Restraint System. Adjust the lap portion of the reference belt to achieve a tension load of 50 N ± 5 N at load cell 1. Make a xxxxx xxxx on the webbing where it passes through the simulated buckle. While maintaining the belt at this position, adjust the diagonal to achieve a tension of 50 N ± 5 N at load cell 2 by either locking the webbing at the Enhanced Child Restraint System webbing locker or by pulling the belt between the belt clamping mechanism and the standard retractor. If the tension in load cell 2 is achieved by pulling the belt between the clamping mechanism and the retractor, the clamping mechanism shall now be locked. Extract all webbing from the retractor spool and rewind the excess webbing keeping a tension of 4 ± 3 N in the belt between the retractor and the pillar loop. The spool shall be locked before the dynamic test. Conduct the dynamic crash test.
AutoNDA by SimpleDocs
Load cell positions. Fit load cell 1 to the outboard position as shown Figure 6 …"

Related to Load cell positions

  • Filling Positions ‌ The Employer will determine when a position will be filled, the type of appointment to be used when filling the position, and the skills and abilities necessary to perform the duties of the specific position within a job classification. Only those candidates who have the position-specific skills and abilities required to perform the duties of the vacant position will be referred for further consideration by the employing agency.

  • Queue Position The order of a valid Interconnection Application, relative to all other pending valid Interconnection Applications, that is established based upon the date- and time- of receipt of the complete Interconnection Application as described in Section 4.7 of the Overview ProcessError! Reference source not found.. Reasonable Efforts – With respect to an action required to be attempted or taken by a Party under these procedures, efforts that are timely and consistent with Good Utility Practice and are otherwise substantially equivalent to those a Party would use to protect its own interests. Reference Point of Applicability – The location, either the Point of Common Coupling or the Point of DER Connection, where the interconnection and interoperability performance requirements specified in IEEE 1547 apply. With mutual agreement, the Area EPS Operator and Customer may determine a point between the Point of Common Coupling and Point of DER Connection. See Minnesota Technical Requirements for more information. Simplified Process – The procedure for evaluating an Interconnection Application for a certified inverter-based DER no larger than 20 kW that uses the screens described in the Interconnection Process – Simplified Process document. The Simplified Process includes simplified procedures.

  • New Positions A. Each newly created position shall be assigned by the Employer to the national craft unit most appropriate for such position within thirty (30) days after its creation. Before such assignment of each new position the Employer shall consult with the Union for the purpose of assigning the new position to the national craft unit most appropriate for such position. The following criteria shall be used in making this determination:

  • Required Coverages For Generation Resources Of 20 Megawatts Or Less Each Constructing Entity shall maintain the types of insurance as described in section 11.1 paragraphs (a) through (e) above in an amount sufficient to insure against all reasonably foreseeable direct liabilities given the size and nature of the generating equipment being interconnected, the interconnection itself, and the characteristics of the system to which the interconnection is made. Additional insurance may be required by the Interconnection Customer, as a function of owning and operating a Generating Facility. All insurance shall be procured from insurance companies rated “A-,” VII or better by AM Best and authorized to do business in a state or states in which the Interconnection Facilities are located. Failure to maintain required insurance shall be a Breach of the Interconnection Construction Service Agreement.

  • Direct Trunked Transport 7.3.2.1 Either Party may elect to purchase direct trunked transport from the other Party.

  • Infrastructure Vulnerability Scanning Supplier will scan its internal environments (e.g., servers, network devices, etc.) related to Deliverables monthly and external environments related to Deliverables weekly. Supplier will have a defined process to address any findings but will ensure that any high-risk vulnerabilities are addressed within 30 days.

  • Filling Vacant Positions During the time the procedures outlined herein are in effect, position vacancies to be filled shall first be offered to regular employees who have a contractual right to be recalled to a position in the involved job classification or who may have a right to “bump” or transfer to the position, as the case may be. In such circumstances, the seniority provisions of the Agreement shall be observed. If no regular employee has a contractual right to the position, the following shall be given consideration in the order (priority) indicated below: 1st Priority: Qualified Job Bank employees 2nd Priority: Employees on a recall list 3rd Priority: Employee applicants from a list of eligibles 4th Priority: Displaced certified temporary employees 5th Priority: Non-employee applicants from a list of eligibles The qualifications of an employee in the Job Bank or on a recall list shall be reviewed to determine whether he/she meets the qualifications for a vacant position. Whether the employee can be trained for a position within a reasonable time (not to exceed three months) shall be considered when determining the qualifications of an employee. If it is determined that the employee does not meet the qualifications for a vacant position, the employee may appeal to the Director of Human Resources. If it is determined that an employee in the Job Bank is qualified for a vacant position, the employee shall be selected. The appointing authority may appeal the issue of whether the employee is qualified. The dispute shall be presented to and resolved by the Job Bank Steering Committee. If it is determined that an employee on a recall list is qualified for a vacant position, the employee will be given priority consideration and may be selected. Appeals regarding employees on a recall list and their qualifications for a position will be handled by the Civil Service Commission. The grievance procedure under the Labor Agreement shall not apply to determinations as to qualifications of the employee for a vacant position.

  • Float Positions The Employer may establish regular float positions which are consecutive hour shifts.

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where InterGlobe has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to InterGlobe. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for InterGlobe (e.g. hairpinning):

  • Permanent Positions All part-time and full-time positions shall be permanent unless identified as being fixed term in accordance with clause 2.2.5.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!