Other General Restrictions Applicable to this RFP Sample Clauses

Other General Restrictions Applicable to this RFP. A firm cannot be a Prime Proposer or JV Partner on more than one proposing team. In addition, if a designated Prime Proposer or JV Partner (lead or non-lead) intends to be listed as a subcontractor on another competing proposal, the Prime Proposer or JV Partner must fully disclose such intent to the affected parties 30 days prior to the due date for proposal submittal. Failure to comply with these restrictions may result in the rejection of one or more affected proposals. A Prime Proposer or JV Partner cannot participate in more than one interview. The SFPUC strongly advises any proposing firm to consult with their legal counsel to determine whether or not a conflict of interest exists. It is the responsibility of the proposing firm to make that determination. The SFPUC will not advise consultants on conflict of interest matters.
AutoNDA by SimpleDocs
Other General Restrictions Applicable to this RFP. ‌ A firm cannot be a Prime Consultant or JV Partner on more than one (1) proposing team. In addition, if a designated Prime Consultant or JV Partner (Lead or Non-leading) intends to be listed as a subconsultant on another competing proposal, the Prime Consultant or JV Partner must fully disclose such intent to the affected parties 30 days prior to the due date for Proposal submittal. Failure to comply with these restrictions may result in the rejection of one or more affected Proposals. A Prime Consultant or JV Partner cannot participate in more than one interview. A subconsultant or individual on more than one (1) proposing team cannot participate in the interview.
Other General Restrictions Applicable to this RFP. ‌ A firm cannot be a Prime Proposer or JV Partner on more than one proposing team. In addition, if a designated Prime Proposer or JV Partner (lead or non-lead) intends to be listed as a subcontractor on another competing proposal, the Prime Proposer or JV Partner must fully disclose such intent to the affected parties 15 days prior to the due date for proposal submittal. Failure to comply with these restrictions may result in the rejection of one or more affected proposals. A Prime Proposer or JV Partner cannot participate in more than one interview. Consultation with Counsel‌ The SFPUC strongly advises any proposing firm to consult with their legal counsel to determine whether or not a conflict of interest exists. It is the responsibility of the proposing firm to make that determination. The SFPUC will not advise consultants on conflict of interest matters. 13 Acronyms and Abbreviations‌ AACE Association for the Advancement of Cost Engineering AGM Assistant General Manager BFS Xxxxx Xxxxx Pump Station BIM Building Information Modeling CAB Contract Administration Bureau CCM Contractor Construction Manager CEQA California Environmental Quality Act CHS Channel Pump Station CM/GC Construction Manager/General Contractor CM Construction Management CMB Construction Management Bureau CMD Contract Monitoring Division CMIS Construction Management Information System CPI Consumer Price Index CPM Critical Path Method CRA Cybersecurity Risk Assessment DEI Diversity, Equity, and Inclusion CSPE Consultant Services Performance Evaluation EIR Environmental Impact Report EMG Environmental Management Group EMB Engineering Management Bureau EOPR Effective Overhead and Profit Rate FSHP First Source Hiring Program HCAO Health Care Accountability Ordinance HCIP Hetchy Capital Improvement Program ICS Influent Control Structure ICC International Code Council IRS Internal Revenue Service JV Joint Venture LBE Local Business Enterprise LOS Level of Service MBE Minority Business Enterprise MCO Minimum Compensation Ordinance mgd million gallons per day NCA Notice of Contract Award NPF North Point Wet Weather Facility NTP Notice to Proceed O&M Operations & Maintenance OBE Other Business Enterprise ODC Other Direct Cost OPR Overhead and Profit Rate OPS Overhead and Profit Schedule OSP Oceanside Water Pollution Control Plant PLA Project Labor Agreement PMB Program Management Bureau PMP Project Management Professional REP Racial Equity Plan RFI Request for Information RFP Request for Propo...

Related to Other General Restrictions Applicable to this RFP

  • Limitation of Vendor Indemnification and Similar Clauses This is a requirement of the TIPS Contract and is non-negotiable TIPS, a department of Region 8 Education Service Center, a political subdivision, and local government entity of the State of Texas, is prohibited from indemnifying third-parties (pursuant to the Article 3, Section 52 of the Texas Constitution) except as otherwise specifically provided for by law or as ordered by a court of competent jurisdiction. Article 3, Section 52 of the Texas Constitution states that "no debt shall be created by or on behalf of the State … " and the Texas Attorney General has opined that a contractually imposed obligation of indemnity creates a "debt" in the constitutional sense. Tex. Att'y Gen. Op. No. MW-475 (1982). Thus, contract clauses which require TIPS to indemnify Vendor, pay liquidated damages, pay attorney's fees, waive Vendor's liability, or waive any applicable statute of limitations must be deleted or qualified with ''to the extent permitted by the Constitution and Laws of the State of Texas." Does Vendor agree? Yes, I Agree TIPS, a department of Region 8 Education Service Center, a political subdivision, and local government entity of the State of Texas, does not agree to binding arbitration as a remedy to dispute and no such provision shall be permitted in this Agreement with TIPS. Vendor agrees that any claim arising out of or related to this Agreement, except those specifically and expressly waived or negotiated within this Agreement, may be subject to non-binding mediation at the request of either party to be conducted by a mutually agreed upon mediator as prerequisite to the filing of any lawsuit arising out of or related to this Agreement. Mediation shall be held in either Camp or Titus County, Texas. Agreements reached in mediation will be subject to the approval by the Region 8 ESC's Board of Directors, authorized signature of the Parties if approved by the Board of Directors, and, once approved by the Board of Directors and properly signed, shall thereafter be enforceable as provided by the laws of the State of Texas. Does Vendor agree? Yes, Vendor agrees Does Vendor agree? Yes, Vendor agrees Vendor agrees that nothing in this Agreement shall be construed as a waiver of sovereign or government immunity; nor constitute or be construed as a waiver of any of the privileges, rights, defenses, remedies, or immunities available to Region 8 Education Service Center or its TIPS Department. The failure to enforce, or any delay in the enforcement, of any privileges, rights, defenses, remedies, or immunities available to Region 8 Education Service Center or its TIPS Department under this Agreement or under applicable law shall not constitute a waiver of such privileges, rights, defenses, remedies, or immunities or be considered as a basis for estoppel. Does Vendor agree? Yes, Vendor agrees Vendor agrees that TIPS and TIPS Members shall not be liable for interest or late-payment fees on past-due balances at a rate higher than permitted by the laws or regulations of the jurisdiction of the TIPS Member. Funding-Out Clause: Vendor agrees to abide by the applicable laws and regulations, including but not limited to Texas Local Government Code § 271.903, or any other statutory or regulatory limitation of the jurisdiction of any TIPS Member, which requires that contracts approved by TIPS or a TIPS Member are subject to the budgeting and appropriation of currently available funds by the entity or its governing body.

  • File Management and Record Retention relating to CRF Eligible Persons or Households Grantee must maintain a separate file for every applicant, Eligible Person, or Household, regardless of whether the request was approved or denied. a. Contents of File: Each file must contain sufficient and legible documentation. Documents must be secured within the file and must be organized systematically.

  • CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “ (1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “ (1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.

  • Restrictions on Lobbying The subrecipient shall not use funds made available to it under this Agreement to pay for, influence, or seek to influence any officer or employee of a State or Federal government.

  • General Provisions Applicable to Loans Section 6.1 Minimum Amounts for Committed Borrowings, Conversions or Continuations and Prepayments.

  • Conditions Applicable to All Sale and Purchase Transactions (a) Any transaction effected under this Article X or in connection with the acquisition of additional Collateral Loans shall be conducted on an arm’s length basis and, if effected with a Person that is an Affiliate of the Collateral Manager (or with an account or portfolio for which the Collateral Manager or any of its Affiliates serves as investment adviser), shall be on terms no less favorable to the Borrower than would be the case if such Person were not such an Affiliate or as otherwise expressly permitted in this Agreement. (b) Upon each contribution of one or more Collateral Loans from the BDC to the Borrower and upon each acquisition by the Borrower of a Collateral Loan from the BDC, the Collateral Manager or any of their respective Affiliates (each such contribution or other such acquisition, an “Affiliate Loan Acquisition”) (i) all of the Borrower’s right, title and interest to such Collateral Loan shall be subject to the Lien granted to the Collateral Agent pursuant to this Agreement and (ii) such Collateral Loan shall be Delivered to the Collateral Agent (or the Custodian on its behalf, as applicable), provided, that, notwithstanding the foregoing, the Related Documents and Loan Checklist may be delivered within ten (10) Business Days of the contribution or acquisition. (c) The Aggregate Principal Balance of the Collateral Loan(s) which are the subject of any sale to an Affiliate of the Borrower under this Article X or substitution pursuant to Section 10.03, together with the sum of the Aggregate Principal Balance of all Collateral Loans sold to Affiliates or substituted in the 12 month period preceding the proposed date of sale or substitution (or such lesser number of months as shall have elapsed since the Closing Date) shall not exceed 20% of the Net Purchased Loan Balance; provided that, the sum of the Aggregate Principal Balance of all Defaulted Collateral Loans or Ineligible Collateral Loans sold to Affiliates or substituted in the 12 month period preceding the proposed date of sale or substitution (or such lesser number of months as shall have elapsed since the Closing Date) shall not exceed 10% of the Net Purchased Loan Balance. For the avoidance of doubt, the foregoing limitations shall not apply (i) to Warranty Loans (as defined in the Purchase and Sale Agreement) or (ii) where Collateral Loans are sold by the Borrower in connection with a Permitted Securitization.

  • General Conditions Applicable to Option to Build If the Interconnection Customer assumes responsibility for the design, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, (1) the Interconnection Customer shall engineer, procure equipment, and construct the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades (or portions thereof) using Good Utility Practice and using standards and specifications provided in advance by the Participating TO; (2) The Interconnection Customer’s engineering, procurement and construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades shall comply with all requirements of law to which the Participating TO would be subject in the engineering, procurement or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades; (3) the Participating TO shall review, and the Interconnection Customer shall obtain the Participating TO’s approval of, the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, which approval shall not be unreasonably withheld, and the CAISO may, at its option, review the engineering design, equipment acceptance tests, and the construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades; (4) prior to commencement of construction, the Interconnection Customer shall provide to the Participating TO, with a copy to the CAISO for informational purposes, a schedule for construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades, and shall promptly respond to requests for information from the Participating TO; (5) at any time during construction, the Participating TO shall have the right to gain unrestricted access to the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades and to conduct inspections of the same; (6) at any time during construction, should any phase of the engineering, equipment procurement, or construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades not meet the standards and specifications provided by the Participating TO, the Interconnection Customer shall be obligated to remedy deficiencies in that portion of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades; (7) the Interconnection Customer shall indemnify the CAISO and Participating TO for claims arising from the Interconnection Customer's construction of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades under the terms and procedures applicable to Article 18.1

  • Certain General Provisions 30 5.1. Closing Fee..........................................................................30 5.2. Agent's Fee..........................................................................30 5.3.

  • General Restrictions on Use Advisor agrees to hold all Proprietary Information in confidence and not to, directly or indirectly, disclose, use, copy, publish, summarize, or remove from Company's premises any Proprietary Information (or remove from the premises any other property of Company), except (i) during the consulting relationship to the extent authorized and necessary to carry out Advisor's responsibilities under this Agreement, and (ii) after termination of the consulting relationship, only as specifically authorized in writing by Company. Notwithstanding the foregoing, such restrictions shall not apply to: (x) information which Advisor can show was rightfully in Advisor's possession at the time of disclosure by Company; (y) information which Advisor can show was received from a third party who lawfully developed the information independently of Company or obtained such information from Company under conditions which did not require that it be held in confidence; or (z) information which, at the time of disclosure, is generally available to the public.

  • Certification Regarding Prohibition of Boycotting Israel (Tex Gov. Code 2271)

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!