Plans and Specifications Tenant shall be solely responsible for the preparation of the final architectural, electrical and mechanical construction drawings, plans and specifications (called “plans”) necessary for Tenant to construct the Premises for Tenant’s occupancy, which plans shall be subject to approval by Landlord’s architect and engineers and shall comply with their reasonable requirements to avoid aesthetic or other conflicts with the design and function of the balance of the Building. Landlord’s approval is solely given for the benefit of Landlord, and neither Tenant nor any third party shall have the right to rely upon Landlord’s approval of Tenant’s plans for any purpose whatsoever other than that Landlord does not object thereto under this Lease. Landlord’s architects and engineers shall respond (with approval or disapproval) to any plan submission by Tenant within 8 business days after Landlord’s receipt thereof. If Landlord fails to respond to any such submission within such 8 business day period, which failure continues for more than 2 business days after Tenant gives Landlord a written notice (the “Deemed Approved Notice”) advising Landlord that such plan submission shall be deemed approved within 2 business days of Landlord’s receipt of the Deemed Approved Notice, then such plan submission shall be deemed approved hereunder. The Deemed Approved Notice shall, in order to be effective, contain on the first page thereof, in a font at least twice as large as the font of any other text contained in such notice, a legend substantially as follows: “FAILURE TO RESPOND TO THIS NOTICE WITHIN TWO (2) BUSINESS DAYS AFTER RECEIPT HEREOF SHALL CONSTITUTE LANDLORD’S APPROVAL OF SUBMITTED PLANS.” In the event Landlord’s architect’s or engineers’ approval of Tenant’s plans is withheld or conditioned, Landlord shall send prompt written notification thereof to Tenant and include a reasonably detailed statement identifying the reasons for such refusal or condition, and Tenant shall promptly have the plans revised by its architect to incorporate all reasonable objections and conditions presented by Landlord and shall resubmit such plans to Landlord. Landlord’s architects and engineers shall respond (with approval or disapproval) to any plan re-submission by Tenant within 8 business days after Landlord’s receipt thereof. Such process shall be followed until the plans shall have been approved by Landlord’s architect and engineers without unreasonable objection or condition. Without limiting the foregoing, Tenant shall be responsible for all elements of the design of Tenant’s plans (including, without limitation, compliance with law, functionality of design, the structural integrity of the design, the configuration of the Premises and the placement of Tenant’s furniture, appliances and equipment), and Landlord’s approval of Tenant’s plans shall in no event relieve Tenant of the responsibility for such design. Tenant agrees it shall be solely responsible for the timely preparation and submission of all such plans and for all elements of the design of such plans and for all costs related thereto. (The word “architect” as used in this Section 3.2 shall include an interior designer or space planner.) Tenant shall reimburse Landlord Landlord’s reasonable out-of-pocket expense incurred in connection with the review of Tenant’s plans.
Approval of Plans and Specifications The Plans and Specifications will conform to the requirements and conditions set out by applicable law or any effective restrictive covenant, and to all governmental authorities which exercise jurisdiction over the Leased Premises or the construction thereon.
Licenses and Permits Each Mortgagor covenants in the Mortgage Loan documents that it shall keep all material licenses, permits, franchises, certificates of occupancy and applicable governmental approvals necessary for the operation of the Mortgaged Property in full force and effect, and to the Mortgage Loan Seller’s knowledge based upon any of a letter from any government authorities, zoning consultant’s report or other affirmative investigation of local law compliance consistent with the investigation conducted by the Mortgage Loan Seller for similar commercial and multifamily mortgage loans intended for securitization; all such material licenses, permits, franchises, certificates of occupancy and applicable governmental approvals are in effect or the failure to obtain or maintain such material licenses, permits, franchises or certificates of occupancy and applicable governmental approvals does not materially and adversely affect the use and/or operation of the Mortgaged Property as it was used and operated as of the date of origination of the Mortgage Loan or the rights of a holder of the related Mortgage Loan. The Mortgage Loan documents require the related Mortgagor to comply in all material respects with all applicable regulations, zoning and building laws.
License and Permits Each party shall obtain and maintain on an active and current basis, all licenses, permits, registrations, approvals and other authority as may be required from any applicable federal, state, tribal and local governments and agencies having jurisdiction over the subject matter of this Lease and any Lease Schedule.
Consents and Permits Except as disclosed in the Registration Statement and the Prospectus, the Company and its Subsidiaries have made all filings, applications and submissions required by, possesses and is operating in compliance with, all approvals, licenses, certificates, certifications, clearances, consents, grants, exemptions, marks, notifications, orders, permits and other authorizations issued by, the appropriate federal, state or foreign Governmental Authority (including, without limitation, the United States Food and Drug Administration (the “FDA”), the United States Drug Enforcement Administration or any other foreign, federal, state, provincial, court or local government or regulatory authorities including self-regulatory organizations engaged in the regulation of clinical trials, pharmaceuticals, biologics or biohazardous substances or materials) necessary for the ownership or lease of their respective properties or to conduct its businesses as described in the Registration Statement and the Prospectus (collectively, “Permits”), except for such Permits the failure of which to possess, obtain or make the same would not have a Material Adverse Effect; the Company and its Subsidiaries are in compliance with the terms and conditions of all such Permits, except where the failure to be in compliance would not have a Material Adverse Effect; all of the Permits are valid and in full force and effect, except where any invalidity, individually or in the aggregate, would not be reasonably expected to have a Material Adverse Effect; and neither the Company nor any of its Subsidiaries has received any written notice relating to the limitation, revocation, cancellation, suspension, modification or non-renewal of any such Permit which, singly or in the aggregate, if the subject of an unfavorable decision, ruling or finding, would have a Material Adverse Effect, or has any reason to believe that any such license, certificate, permit or authorization will not be renewed in the ordinary course. To the extent required by applicable laws and regulations of the FDA, the Company or the applicable Subsidiary has submitted to the FDA an Investigational New Drug Application or amendment or supplement thereto for each clinical trial it has conducted or sponsored or is conducting or sponsoring; all such submissions were in material compliance with applicable laws and rules and regulations when submitted and no material deficiencies have been asserted by the FDA with respect to any such submissions.
Drawings and Specifications 9.1 A complete list of all Drawings that form a part of the Contract Documents are to be found as an index on the Drawings themselves, and/or may be provided to Developer and/or in the Table of Contents.
9.2 Materials or Work described in words that so applied have a well-known technical or trade meaning shall be deemed to refer to recognized standards, unless noted otherwise.
9.3 Trade Name or Trade Term It is not the intention of the Contract Documents to go into detailed descriptions of any materials and/or methods commonly known to the trade under “trade name” or “trade term.” The mere mention or notation of “trade name” or “trade term” shall be considered a sufficient notice to Developer that it will be required to complete the work so named, complete, finished, and operable, with all its appurtenances, according to the best practices of the trade.
9.4 The naming of any material and/or equipment shall mean furnishing and installing of same, including all incidental and accessory items thereto and/or labor therefor, as per best practices of the trade(s) involved, unless specifically noted otherwise.
9.5 Contract Documents are complementary, and what is called for by one shall be binding as if called for by all. As such, Drawings and Specifications are intended to be fully cooperative and to agree. However, if Developer observes that Drawings and Specifications are in conflict with the Contract Documents, Developer shall promptly notify District and Architect in writing, and any necessary changes shall be made as provided in the Contract Documents.
9.6 Figured dimensions shall be followed in preference to scaled dimensions, and Developer shall make all additional measurements necessary for the work and shall be responsible for their accuracy. Before ordering any material or doing any work, each Developer shall verify all measurements at the building and shall be responsible for the correctness of same.
9.7 Should any question arise concerning the intent or meaning of the Contract Documents, including the Plans and Specifications, the question shall be submitted to the District for interpretation. If a conflict exists in the Contract Documents, these Construction Provisions shall control over the Facilities Lease, which shall control over the Site Lease, which shall control over Division 1 Documents, which shall control over Division 2 through Division 49 documents, which shall control over figured dimensions, which shall control over large-scale drawings, which shall control over small-scale drawings. In no case shall a document calling for lower quality and/or quantity of material or workmanship control. However, in the case of discrepancy or ambiguity solely between and among the Drawings and Specifications, the discrepancy or ambiguity shall be resolved in favor of the interpretation that will provide District with the functionally complete and operable Project described in the Drawings and Specifications.
9.8 Drawings and Specifications are intended to comply with all laws, ordinances, rules, and regulations of constituted authorities having jurisdiction, and where referred to in the Contract Documents, the laws, ordinances, rules, and regulations shall be considered as a part of the Contract Documents within the limits specified.
9.9 As required by Section 4-317(c), Part 1, Title 24, CCR: “Should any existing conditions such as deterioration or non-complying construction be discovered which is not covered by the DSA-approved documents wherein the finished work will not comply with Title 24, California Code of Regulations, a construction change document, or a separate set of plans and specifications, detailing and specifying the required repair work shall be submitted to and approved by DSA before proceeding with the repair work.”
Construction Contracts Item A: Enter the total dollar amount of all contacts awarded on the project/ program. Item B: Enter the total dollar amount of contracts connected with this project/program that were awarded to Section 3 businesses.
Compliance with Laws, Contracts, Licenses, and Permits The Borrower and the Guarantors will, and will cause each of their respective Subsidiaries to, and, to the extent permitted by the terms of the Leases, will cause the Operators of the Pool Properties to, comply in all respects with (i) all Applicable Laws and regulations now or hereafter in effect wherever its business is conducted, including all Environmental Laws, (ii) the provisions of its corporate charter, partnership agreement, limited liability company agreement or declaration of trust, as the case may be, and other charter documents and bylaws, (iii) all agreements and instruments to which it is a party or by which it or any of its properties may be bound, (iv) all applicable decrees, orders, and judgments, and (v) all licenses and permits required Applicable Laws for the conduct of its business or the ownership, use or operation of its properties, except where failure so to comply with either clause (i) or (v) would not result in the material non-compliance with the items described in such clauses. If any authorization, consent, approval, permit or license from any officer, agency or instrumentality of any government shall become necessary or required in order that the Borrower, any Guarantor or their respective Subsidiaries may fulfill any of its obligations hereunder, the Borrower, such Guarantor or such Subsidiary will promptly take or cause to be taken all steps necessary to obtain such authorization, consent, approval, permit or license and furnish the Agent and the Lenders with evidence thereof. The Borrower shall develop and implement such programs, policies and procedures as are necessary to comply with the Patriot Act and shall promptly advise Agent in writing in the event that the Borrower shall determine that any investors in the Borrower are in violation of such act.
Compliance with Laws and Permits Each of the Credit Parties is in compliance in all material respects with all Laws applicable to it and its business and assets, including Environmental Laws and ABTL Laws. Each of the Credit Parties holds all material permits, licenses, approvals, consents and other authorizations required under all such laws and regulations to own its assets and to carry on its business.
Construction Plans Tenant shall prepare final plans and specifications for the Tenant Improvements that (a) are consistent with and are logical evolutions of the Approved Schematic Plans and (b) incorporate any other Tenant-requested (and Landlord-approved) Changes (as defined below). As soon as such final plans and specifications ("Construction Plans") are completed, Tenant shall deliver the same to Landlord for Landlord's approval, which approval shall not be unreasonably withheld, conditioned or delayed. All such Construction Plans shall be submitted by Tenant to Landlord in electronic .pdf, CADD and full-size hard copy formats, and shall be approved or disapproved by Landlord within ten (10) business days after delivery to Landlord. Landlord's failure to respond within such ten (10) business day period shall be deemed approval by Landlord. If the Construction Plans are disapproved by Landlord, then Landlord shall notify Tenant in writing of its objections to such Construction Plans, and the parties shall confer and negotiate in good faith to reach agreement on the Construction Plans. Promptly after the Construction Plans are approved by Landlord and Tenant, two (2) copies of such Construction Plans shall be initialed and dated by Landlord and Tenant, and Tenant shall promptly submit such Construction Plans to all appropriate Governmental Authorities for approval. The Construction Plans so approved, and all change orders approved (to the extent required) by Landlord, are referred to herein as the "Approved Plans."
