Plant Coding Sample Clauses

Plant Coding. Plant Coding shall be undertaken by the Employer, and as such the Contractor shall make available the following documentation to code:
AutoNDA by SimpleDocs
Plant Coding. (1) The LIM 103A AKZ coding manual and the Hybrid Coding Standard (240-131050729) shall be used to allocate codes to plant or system included in the works.
Plant Coding. Coding of the design shall be based on the latest revision of 240-131050729 Hybrid Coding Standard and the Employer shall undertake the coding in line with its standards. The AKZ coding shall be done according to LIM103 and applied during the design review stage(s) and cross referenced to all arrangement drawings, schematics, instructions and manuals and where practical to spare parts list/manuals. The Contractor shall be required to include allocated coding to the electronic design drawings.

Related to Plant Coding

  • Plant The expression ‘Plant’ as used in the tender papers shall mean every temporary accessory necessary or considered necessary by the Engineer to execute, construct, complete and maintain the work and all altered, modified, substituted and additional works ordered in the time and the manner herein provided and all temporary materials and special and other articles and appliance of every sort kind and description whatsoever intended or used therefore.

  • Electrical appliance safety The Hirer shall ensure that any electrical appliances brought by them to the premises and used there shall be safe, in good working order, and used in a safe manner in accordance with the Electricity at Work Regulations 1989. Where a residual circuit breaker is provided the hirer must make use of it in the interests of public safety.

  • Calibration The comparison of a measurement system or device of unverified accuracy with a measurement system of known and greater accuracy to detect deviation of the unverified measurement system from required performance specifications (of the unverified measurement system or device) and to quantify all measured values to applicable units of the international system of units.

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins.

  • Petroleum Storage Systems A. At Company’s expense, Company will at all times comply with all federal, state, and local requirements, including but not limited to, the regulations of the FDEP as stated in Chapters 62-761 and 62-762, FAC, the requirements of the Federal Oil Pollution Prevention regulation found in Title 40 of the Code of Federal Regulations Part 112 (40 CFR part 112), as well as the requirements of the Environmental Protection Commission of Hillsborough County (EPC), as may be amended or replaced, pertaining to petroleum storage tank and piping system construction, operation, inspection, and compliance monitoring programs; release detection methods and procedures; maintenance; and preventative maintenance programs. Company will be responsible for all spillage, overflow, or escape of gases, petroleum or petroleum products, and for all fines and penalties in connection therewith. All petroleum storage systems will be registered by Company, and Company will display the registration placard as required by law.

  • Electrical Provide drawings for the following systems:

  • Accident Prevention Health and Safety Committee The Employer and the Union agree that they mutually to maintain standards of safety and health in the Hospital in order to prevent accidents, injury, and illness. ected or Recognizing its responsibilities under the applicable legislation, the Hospital agrees to accept as a member of its Accident Prevention Health and Safety Committee, at least one (1) representative sel appointed by the Union from amongst Bargaining Unit employees. Such Committee shall identify potential dangers and means of improving health and safety programs, and recommend actions to be taken to improve conditions related to safety and health. The Hospital agrees to co-operate reasonably in providing necessary information to enable the Committee its functions. Meetings shall be held every second month or more frequently at the call of the Chair if required. The Committee shall maintain minutes of meetings and make the Same available for review. Any representative appointed or accordancewith hereof shall serve for a term of one (1) calendar year from the date of appointment which may be renewed for further of one (1) year. Time off for such to attend meetings of the Accident Prevention Health and Safety Committee in accordance with the foregoing shall be granted, and any attending such meetings during their regularly scheduled hours of work shall not lose regular as a result of such The Union agrees to endeavour to obtain the membership in the observation of all safety rules and practices. Safety Shoes The Hospital will provide sixty dollars ($60.00) annually effective April and eighty dollars ($80.00) effective April to each employee who is required by the Hospital, as delineated below, to wear safety footwear during the of his duties. The Hospital will require employees the following functions to wear appropriate Engineering Services; Grounds; Transport; (only where frequently working in storage areas). (as determined by the Hospital) heavy carts on a regular basis, e.g., linen carts, food wagons. ARTICLE BULLETIN BOARDS The Employer shall provide bulletin that all employees will have access to them have the right to post notices of meetings and such other notices as may be of interest to the membership. The wage increase listed on a retroactive to contact,in writing (with a copy to the Union) at their last-known entitle who have left its employ, to advise them of their any retroactive wage adjustment. Any employees who have employees shall have notice from the Hospital in which to claim from the Hospital any adjustment to their remuneration entitlement. The retroactive payments shall be made by separate cheques to the employees so entitled within sixty (60) days from the date of ratification. All other adjustments shall be effective as set out specifically in this Collective Agreement.

  • Pipelines Developer shall have no interest in the pipeline gathering system, which gathering system shall remain the sole property of Operator or its Affiliates and shall be maintained at their sole cost and expense.

  • Loading RPMG shall schedule the loading and shipping of all outbound corn oil purchased hereunder, but all labor and equipment necessary to load trucks and rail cars and other associated costs shall be supplied and borne by Producer without charge to RPMG. Producer shall handle the corn oil in a good and workmanlike manner in accordance with RPMG’s written requirements and normal industry practice. Producer shall maintain the truck and rail loading facilities in safe operating condition in accordance with normal industry standards and shall visually inspect all trucks and rail cars to assure (i) cleanliness so as to avoid contamination, and (ii) that such trucks and railcars are in a condition suitable for transporting the corn oil. RPMG and RPMG’s agents shall have adequate access to the Ethanol Facility to load Producer’s corn oil on an industry standard basis that allows RPMG to economically market Producer’s corn oil. RPMG’s employees shall follow all reasonable safety rules and procedures promulgated by Producer and provided to RPMG reasonably in advance and in writing. Producer shall supply product description tags, certificates of analysis, bills of lading and/or material safety data sheets that are applicable to all shipments. In the event that Producer fails to provide the labor, equipment and facilities necessary to meet RPMG’s loading schedule, Producer shall be responsible for all costs and expenses, including without limitation actual demurrage and wait time, incurred by RPMG resulting from or arising in connection with Producer’s failure to do so.

  • Electrical Safety Only UL approved items are permitted in Housing & Residence Life. Extension and multi-use cords must be heavy duty, single plug, and be UL approved. Altering or adapting electrical outlets and equipment and overloading circuits jeopardize safety and thus are not permitted.

Time is Money Join Law Insider Premium to draft better contracts faster.