Procurement of Product Materials Sample Clauses

Procurement of Product Materials. Brammer shall order sufficient quantities of all Product Materials (except Customer-Provided Materials) to enable Brammer to manufacture and deliver Product(s) in accordance with Customer’s Binding Forecasts and accepted Purchase Orders. If requested by Customer, Brammer will order and hold sufficient quantities of Customer-Provided Materials and Customer will pay for these Customer-Provided Materials and hold title to them. Customer shall be responsible for excess or obsolete Product Materials (including Customer-Provided Materials) purchased by Manufacturer to the extent the excess or obsolescence is caused by any: (i) change to, or cancellation of, a firm Purchase Order, (ii) change to a Binding Forecast, (iii) without limiting this Section 8.1, change to the Specifications or the specifications of such Product Materials after such Product Materials have been purchased by Brammer based upon a Customer firm Purchase Order or a Binding Forecast, as applicable, or (iv) without limiting Section 3, with respect to any Product, reduction in the quantity of such Product as specified in a Binding Forecast relative to the quantity of such Product that was specified in any previous Binding Forecast with respect to the same time period. Customer shall reimburse Brammer for such excess or obsolescence described in this Section 8.1 on a [**] basis within [**] following receipt of Xxxxxxx’x invoice therefor.
Sample 1
AutoNDA by SimpleDocs
Procurement of Product Materials. Subject to Article 4, Brammer shall order sufficient quantities of all Product Materials (except Customer Provided Materials), including Process Consumables and agreed safety stocks, to accommodate up to [**] of a Forecast at Customer’s sole cost and expense and as agreed between the Parties to reasonably avoid Manufacturing interruptions consistent with the agreed Binding Forecasts and accepted Purchase Orders. Subject to Article 4, Customer shall be responsible for excess or obsolete Product Materials (including Customer Provided Materials) purchased by Brammer to the extent (i) Customer previously approved the purchase of such Product Materials and (ii) such excess or obsolescence was caused by any of the following: a (A) change by Customer to a Binding Forecast, (B) without limiting this Section 8.2, change by Customer to the Specifications or the specifications of such Product Materials after such Product Materials have been purchased by Brammer based upon a Customer Purchase Order or a Binding Forecast, as applicable, or (C) without limiting Section 3, with respect to any Product, reduction by Customer in the quantity of such Product as specified in a Binding Forecast relative to the quantity of such Product that was specified in any previous Binding Forecast with respect to the same time period; provided that Brammer shall use Commercially Reasonable Efforts to minimize or otherwise mitigate the costs of such excess or obsolete Product Materials (including by using such Product Materials for other products or returning such Product Materials). To the extent required by the foregoing, Customer shall reimburse Brammer for such excess or obsolescence described in this Section 8.2 on a Calendar Quarterly basis within [**] following receipt of Xxxxxxx’x invoice therefor.
Sample 1

Related to Procurement of Product Materials

  • Development of Products (a) During the term of this Agreement, ViewRay may from time to time seek services from PEKO with respect to the development of certain Products that can be incorporated into the ViewRay Renaissance™ MRI-guided radiation therapy system. For each Program to be undertaken by PEKO pursuant to this Agreement, the parties will prepare a “Work Statement” and agree to said “Work Statement” in substantially the form attached as Attachment 1. Each Work Statement will describe: (i) the (i) services that PEKO will be responsible for providing to ViewRay and the deliverables that PEKO will be responsible for delivering to ViewRay (“Deliverable(s)”), (ii) delivery schedule for the Deliverables, (iii) pricing terms, (iv) work plan for the Program, and (v) ViewRay’s responsibilities in connection with the Program. Each Work Statement will be prepared based upon the requirements and information provided to PEKO by ViewRay. A separate Work Statement will be required for each Program; and each Work Statement will become subject to this Agreement only when mutually agreed and signed by ViewRay and PEKO.

  • Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.

  • Supply of Products TheraSense shall be responsible for the ------------------ manufacture of FreeStyle Products for sale to Nipro.

  • Promotional Materials In the event that the Fund or the Adviser makes available any promotional materials related to the Securities or the transactions contemplated hereby intended for use only by registered broker-dealers and registered representatives thereof by means of an Internet web site or similar electronic means, the Adviser will install and maintain, or will cause to be installed and maintained, pre-qualification and password-protection or similar procedures which are reasonably designed to effectively prohibit access to such promotional materials by persons other than registered broker-dealers and registered representatives thereof.

  • Manufacture of Product Prior to commercialization of the Product, the Parties may, if appropriate for both parties, negotiate in good faith a manufacturing and supply agreement to provide for Licensor to fulfill the manufacturing requirements of Licensee for Product for sale in the European market. The cost of such manufacturing shall not be greater than * percent (*%) of the cost of any competitor cGMP contract manufacturing facility that proposes to manufacturer the Product for Licensee. * Confidential information has been omitted and filed confidentially with the Securities and Exchange Commission.

  • Supply of Product The JDC shall be responsible for determining the sources of, and arrangements for, the manufacture and supply of Products that the JDC believes will result in long-term profit maximization for such Products. The JDC shall endeavor to [ * ].

  • Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.

  • Manufacturing Intrexon shall have the option and, in the event it so elects, shall use Diligent Efforts, to perform any manufacturing activities in connection with the Aquaculture Program that relate to the Intrexon Materials, including through the use of a suitable Third Party contract manufacturer. To the extent that Intrexon so elects, Intrexon may request that AquaBounty and Intrexon establish and execute a separate manufacturing and supply agreement, which agreement will establish and govern the production, quality assurance, and regulatory activities associated with manufacture of Intrexon Materials. Except as provided in Section 4.1, any manufacturing undertaken by Intrexon pursuant to the preceding sentence shall be performed in exchange for cash payments equal to Intrexon’s Fully Loaded Cost in connection with such manufacturing, on terms to be negotiated by the Parties in good faith. In the event that Intrexon does not manufacture Intrexon Materials or bulk quantities of other components of AquaBounty Products, then Intrexon shall provide to AquaBounty or a contract manufacturer selected by AquaBounty and approved by Intrexon (such approval not to be unreasonably withheld) all Information Controlled by Intrexon that is (a) related to the manufacturing of such Intrexon Materials or bulk qualities of other components of AquaBounty Products for use in the Field and (b) reasonably necessary to enable AquaBounty or such contract manufacturer (as appropriate) for the sole purpose of manufacturing such Intrexon Materials or bulk quantities of other components of AquaBounty Products. The costs and expenses incurred by Intrexon in carrying out such transfer shall be borne by Intrexon. Any manufacturing Information transferred hereunder to AquaBounty or its contract manufacturer shall not be further transferred to any Third Party, including any Product Sublicensee, or any AquaBounty Affiliate without the prior written consent of Intrexon; provided, however, that Intrexon shall not unreasonably withhold such consent if necessary to permit AquaBounty to switch manufacturers.

  • Supply of Materials Unless the parties otherwise agree in a Work Order, Manufacturer will supply, in accordance with the relevant approved raw material specifications, all materials to be used by Manufacturer in the performance of Services under a Work Order other than the Rhythm Materials specified in such Work Order. Rhythm or its designees will provide Manufacturer with the Rhythm Materials. Manufacturer agrees (a) to account for all Rhythm Materials, (b) not to provide Rhythm Materials to any third party (other than an Affiliate acting as a permitted subcontractor) without the express prior written consent of Rhythm, (c) not to use Rhythm Materials for any purpose other than conducting the Services, including, without limitation, not to analyze, characterize, modify or reverse engineer any Rhythm Materials or take any action to determine the structure or composition of any Rhythm Materials unless required * CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO RULE 406 PROMULGATED UNDER THE SECURITIES ACT OF 1933, AS AMENDED. pursuant to a signed Work Order, and (d) to destroy or return to Rhythm all unused quantities of Rhythm Materials according to Rhythm’s written directions.

  • Regulatory Materials (a) Alvogen shall have the sole right to control filing or submission of Regulatory Materials with the Regulatory Agencies in the Territory with respect to Product including the MAA Approval for Product and Regulatory Approvals in the Territory, subject to Section 3.2 and the oversight of and in consultation with the Executive Steering Committee, and [***]Certain confidential information contained in this document, marked by brackets, has been omitted because it is both (i) not material and (ii) would be competitively harmful if publicly disclosed. shall be responsible for managing all communications and interactions with the Regulatory Agencies in the Territory with respect to Product in the Territory. In all cases, prior to the filing of any Regulatory Materials (including the MAA for Product) for Product with the applicable Regulatory Agency, Alvogen shall provide a copy thereof to Pfenex (through the Executive Steering Committee) for its review and comment. Pfenex shall have fifteen (15) Business Days from the date it receives a copy of any Regulatory Materials with respect to the Product to provide Alvogen with comments regarding such Regulatory Materials, unless the Regulatory Agencies in the Territory or Applicable Law requires that such Regulatory Material(s) be filed on a timeline that does not reasonably permit such advanced notice, in which case Pfenex shall have as much time as is reasonably practicable to provide Alvogen with comments. Alvogen shall consider all such comments in good faith. Alvogen shall, to the extent permitted by Applicable Law, provide Pfenex with (i) reasonable advanced notice (and in no event less than fifteen (15) Business Days’ advance notice whenever feasible) of substantive meetings with any Regulatory Agency in the Territory that are either scheduled with or initiated by or on behalf of Alvogen or its Affiliates, (ii) an opportunity to have a reasonable number (but at least two (2)) representatives participate in all substantive meetings with the Regulatory Agencies in the Territory with respect to Product, and in any case keep Pfenex informed as to all material interactions with the Regulatory Agencies in the Territory with respect to Product, and (iii) a copy of any material documents, information and correspondence submitted to or received from the Regulatory Agencies in the Territory with respect to Product as soon as reasonably practicable.

Time is Money Join Law Insider Premium to draft better contracts faster.