Product Investigation Service Sample Clauses

Product Investigation Service. When Applicant submits samples of a device, equipment, material or system (“Product”), UL Contracting Party will provide a “Product Investigation” designed to assess the Product’s conformity to applicable requirements imposed by UL Contracting Party, including, but not limited to, any applicable Underwriters Laboratories Inc. or other local, regional or internationally recognized standards (collectively, “UL Requirements”). A Product Investigation includes without limitation the following: (a) performance of tests on samples of a Product, in accordance with UL Requirements, and (b) evaluation of Product construction criteria by examination of samples of the Product in accordance with UL Requirements. If no prescribed tests or no construction criteria exist for the Product, UL Contracting Party may, but is under no obligation whatsoever to, develop and establish such standards and criteria as are necessary to assess the Product. If UL Contracting Party chooses, in its sole discretion, to formulate any such standards and/or criteria, it will do so in accordance with professional standards generally applicable to conformity assessment testing organizations. Client expressly agrees that UL Contracting Party’s liability for the formulation of any such standards and/or criteria will be strictly limited by the terms of the Product Investigation Service Agreement, including, but not limited to, Paragraphs 10, 11 and 12 of the Global Services Agreement. The purpose of such Product Investigation Service is to determine whether the Product samples conform to UL Requirements and whether the Product might be eligible to bear certain names, trademarks, service marks and certification marks that are controlled or used by UL Contracting Party that include “UL” or the “UL” symbol (each a “UL Mark”).
AutoNDA by SimpleDocs
Product Investigation Service. When Applicant submits samples of a device, equipment, material or system (“Product”), UL Solutions Contracting Party will provide a “Product Investigation” designed to assess the

Related to Product Investigation Service

  • Complaints Investigation The employee who complains of harassment under the provisions of the Human Rights Code must first comply with the Employer’s harassment policy procedures before filing a grievance or human rights complaint.

  • Investigational Services This plan covers certain experimental or investigational services as described in this section. This plan covers clinical trials as required under R.I. General Law § 27-20-60. An approved clinical trial is a phase I, phase II, phase III, or phase IV clinical trial that is being performed to prevent, detect or treat cancer or a life-threatening disease or condition. In order to qualify, the clinical trial must be: • federally funded; • conducted under an investigational new drug application reviewed by the Food and Drug Administration (FDA); or • a drug trial that is exempt from having such an investigational new drug application. To qualify to participate in a clinical trial: • you must be determined to be eligible, according to the trial protocol; • a network provider must have concluded that your participation would be appropriate; and • medical and scientific information must have been provided establishing that your participation in the clinical trial would be appropriate. If a network provider is participating in a clinical trial, and the trial is being conducted in the state in which you reside, you may be required to participate in the trial through the network provider. Coverage under this plan includes routine patient costs for covered healthcare services furnished in connection with participation in a clinical trial. The amount you pay is based on the type of service you receive. Coverage for clinical trials does not include: • the investigational item, device, or service itself; • items or services provided solely to satisfy data collection and that are not used in the direct clinical management; or • a service that is clearly inconsistent with widely accepted standards of care.

  • Geotechnical Investigation Perform in accordance with the City Design Manual and other City requirements as designated in writing by the Director.

  • Investigation Period The first sentence of Section 4.1 of the Purchase Agreement is hereby deleted in its entirety and the following is hereby substituted in lieu thereof: “During the time period commencing upon the Effective Date of this Agreement, and terminating at 11:59 p.m. on October 18, 2012 (the “Investigation Period”), Buyer shall have the right to conduct and complete an investigation of all matters pertaining to the Property and Buyer’s purchase thereof including, without limitation, the matters described in this Section 4.1.”

  • Product Testing No later than [**] prior to a scheduled Delivery ARIAD US shall send to ARIAD SWISSCO the Delivery Documents for review. Following such review, unless within [**] of receipt of the Delivery Documents ARIAD SWISSCO gives written notice of rejection of the Product to be delivered, stating the reasons for such rejection, the Delivery shall proceed, and both Parties shall organize the same. Upon arrival at ARIAD SWISSCO nominated site it shall visually inspect the shipment of the Product to identify any damage to the external packaging. ARIAD SWISSCO may reject any shipment (or portion thereof) of the Product that is damaged by providing to ARIAD US reasonable evidence of damage within [**] after Delivery of such Product. If ARIAD SWISSCO does not so reject any shipment (or portion thereof) of the Product within [**] of Delivery of such Product, ARIAD SWISSCO shall be deemed to have accepted such shipment of the Product; provided, however, that in the case of the Product having any Latent Defect, ARIAD SWISSCO shall notify ARIAD US promptly once it becomes aware that a Product contains a Latent Defect and subsequently may reject such Product by giving written notice to ARIAD US of ARIAD SWISSCO’s rejection of such Product and shipping a representative sample of such Product or other evidence of Non-Conformance to ARIAD US within [**] after becoming aware of such Latent Defect, which notice shall include a description of the Latent Defect.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Product Complaints Subdistributor shall promptly notify Distributor of (but in no event later than 24 hours after receipt), and provide, upon Distributor’s request, reasonable assistance to address and investigate, any complaint or adverse claim about any Product or its use of which Subdistributor becomes aware;

  • Study An application for leave of absence for professional study must be supported by a written statement indicating what study or research is to be undertaken, or, if applicable, what subjects are to be studied and at what institutions.

  • Product Recall (a) If a recall is required by applicable Law, or if Buyer or Supplier reasonably determines that a recall is advisable because the goods may create a potential safety hazard, are not in compliance with any applicable code, standard or legal requirement, or contain a defect or non-conformance with the requirements of this Order occurring or likely to occur in multiple goods, which such defects or non-conformances are substantially similar or have substantially similar causes or effects (collectively a “Serial Defect”), the parties shall promptly communicate such facts to each other. At Buyer’s request, Supplier shall promptly develop a corrective action plan satisfactory to Buyer, which shall include all actions required to recall and/or repair the goods and any actions required by applicable Law (“Corrective Action Plan”) for Buyer’s review and approval. At Buyer’s election, Xxxxx may develop the Corrective Action Plan. In no event shall Buyer and Supplier’s failure to agree on the Corrective Action Plan delay the timely notification of a potential safety hazard, non-compliance or Serial Defect to users of the goods, cause either party to be non-compliant with applicable Law or prevent Buyer from taking reasonable actions to prevent injury or damage to persons, equipment or other property. Supplier and Buyer shall cooperate with and assist each other in any corrective actions and/or filings, if applicable. (b) To the extent a recall is required by applicable Law, or due to a potential safety hazard, non-compliance or Serial Defect, which is caused by Supplier, Supplier shall indemnify and hold Buyer harmless from all reasonable costs and expenses incurred in connection with any recall, repair, replacement or refund program, including all costs related to: (i) investigating and/or inspecting the affected goods; (ii) notifying Buyer’s customers; (iii) repairing, or where repair of the goods is impracticable or impossible, repurchasing or replacing the recalled goods; (iv) packing and shipping the recalled goods; and (v) media notification. Each party shall consult the other before making any statements to the public or a governmental agency relating to such recall, potential safety hazard, non- compliance or Serial Defect, except where such consultation would prevent timely notification required by Law.

  • Independent Investigation Subscriber, in making the decision to purchase the Units, has relied upon an independent investigation of the Company and has not relied upon any information or representations made by any third parties or upon any oral or written representations or assurances from the Company, its officers, directors or employees or any other representatives or agents of the Company, other than as set forth in this Agreement. Subscriber is familiar with the business, operations and financial condition of the Company and has had an opportunity to ask questions of, and receive answers from the Company’s officers and directors concerning the Company and the terms and conditions of the offering of the Units and has had full access to such other information concerning the Company as Subscriber has requested. Subscriber confirms that all documents that it has requested have been made available and that Subscriber has been supplied with all of the additional information concerning this investment which Subscriber has requested.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!