Pharmacovigilance Licensee shall maintain until the termination of this Agreement (or, as applicable, until the rights and obligations intended to survive termination of this Agreement have been fulfilled) pharmacovigilance and risk management systems, procedures and documentation needed to perform and comply with its regulatory obligations and its related obligations under this Agreement. Licensee shall ensure that it will comply with all Applicable Law regarding Licensed Product in the Territory, including, without limitation, those laws and regulations relating to risk management, drug safety and pharmacovigilance. If Licensee becomes aware of any adverse reaction relating to Licenced Product in connection with this Agreement, Licensee shall inform MPP and Pfizer within twenty-four (24) hours of its becoming aware and cooperate with Pfizer in fulfilling Pfizer’s reporting responsibilities under Applicable Law. Licensee will be responsible for fulfilling all pharmacovigilance activities pursuant to the local regulations and requirements for the Licenced Products in the Territory and provide MPP and Pfizer with a report containing information regarding all such activities. Such report shall be provided annually, on February 1 of each year, and otherwise on reasonable request by MPP or Pfizer to both MPP and Pfizer’s pharmacovigilance contact as may be designated by Pfizer from time to time. Licensee shall notify MPP and Pfizer forthwith of the receipt of an enquiry from an Agency in the Territory relating to Licensed Product that concerns any safety issue. If Licensee becomes aware of any action that may be, will be or has been taken by an Agency for a safety reason connected with Licensed Product, it shall immediately, and in any event no later than twenty-four
Random Drug Testing All employees covered by this Agreement shall be subject to random drug testing in accordance with Appendix D.
Product Quality Isoprene, (hereinafter referred to as “Product”) supplied and maintained on consignment at Belpre in accordance with Article 6, and will be in accordance with specifications set forth in Exhibit A. Seller will facsimile to the Buyer at time of shipment a Certificate of Analysis (COA). Seller will provide Buyer six (6) months advanced notification if there is a change in the manufacturing process that will affect the material specifications of Product provided to the Buyer. Product produced by the Seller in different plants is viewed as coming from different supply sources and requires separate qualifications. Product to be shipped for the Seller from third parties must be from a third party qualified by the Buyer based on Buyer’s criteria as specified in Exhibit B. Buyer will have the right to confirm each such shipment-conforms to the agreed specification; Seller must obtain approval prior to shipment any material that does not meet the Buyers specifications. If Seller deliveries Product failing to comply with the specifications set out in Exhibit A, Seller will reimburse Buyer for freight expenses associated with such shipment and be entitled at its option to i) require Seller to replace such defective Product at a price not to exceed the invoice value or ii) to reimburse the invoice value of the defective Product. If, Buyer has cause to complain that the quality of Product delivered to it pursuant to the Contract does not comply with the specification set out in Exhibit A, Buyer will give written notice specifying the nature of its complaint and the parties will promptly meet so as to resolve that complaint. In absence of any agreement to resolve the complaint the parties will appoint at their joint cost a mutually acceptable independent surveyor to examine whether the quality of Product as delivered complied with the specifications set forth in Exhibit A. In the absence of any written notice from Buyer to Seller within 30 days after delivery of the Product, the Product shall be deemed to have been delivered and accepted by Buyer in a satisfactory condition and in all respects in accordance with the specifications and Seller shall have no liability to Buyer with respect to that delivery.
Manufacturing Services Patheon will perform the Manufacturing Services for Products to be distributed and sold by Client in the Territory for the fees specified in Schedules B and C to the relevant Product Agreement. Schedule B to each Product Agreement sets forth a list of cost items that are included in the Price for Products; all cost items that are not included in this list are excluded from the Price and are subject to additional fees to be paid by Client. Patheon may amend the fees set out in Schedules B and C to a Product Agreement as set forth in Article 4. Patheon will perform the Manufacturing Services solely at the Manufacturing Site, unless otherwise agreed in writing by Client. If the parties agree that Patheon will supply, and Client will purchase, at least a specified minimum percentage of Client’s requirements for a Product under a Product Agreement (the “Required Percentage”), then the applicable Product Agreement will set forth the Required Percentage and the time period during which the obligation will apply (the “Required Period”). But this obligation (if any) will cease to apply to Client with respect to the Product if Patheon fails to remain in material compliance with its obligations under this Agreement or the applicable Product Agreement, or Patheon suspends performance under this Agreement or the applicable Product Agreement in connection with a Force Majeure Event or where Patheon is or will be prevented from supplying the Product as a result of the action of a Regulatory Authority. Subject to its obligation (if any) to purchase the Required Percentage of a Product during the Required Period, Client may, at any time, obtain Product from a third party or may, at any time, qualify a third party to perform Manufacturing Services for the Product. In performing the Manufacturing Services, Patheon and Client agree that:
Pharmacovigilance Agreement Subject to the terms of this Agreement, and at a date to be determined by the JDC, Facet and Trubion shall define and finalize the actions the Parties shall employ to protect patients and promote their well-being in a written agreement (hereinafter referred to as the “Pharmacovigilance Agreement”). These responsibilities shall include mutually acceptable guidelines and procedures for the receipt, investigation, recordation, communication, and exchange (as between the Parties) of adverse event reports, pregnancy reports, and any other information concerning the safety of any Collaboration Product. Such guidelines and procedures shall be in accordance with, and enable the Parties to fulfill, local and national regulatory reporting obligations to Governmental Authorities. Furthermore, such agreed procedures shall be consistent with relevant ICH guidelines, except where said guidelines may conflict with existing local regulatory safety reporting requirements, in which case local reporting requirements shall prevail. The Pharmacovigilance Agreement will provide for a worldwide safety database to be maintained by the Party appointed by the JDC. Each Party hereby agrees to comply with its respective obligations under such Pharmacovigilance Agreement (as the Parties may agree to modify it from time to time) and to cause its Affiliates and permitted sublicensees to comply with such obligations.
Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.
Commercialization Reports Throughout the term of this Agreement and during the Sell-Off Period, and within thirty (30) days of December 31st of each year, Company will deliver to University written reports of Company’s and Sublicensees’ efforts and plans to develop and commercialize the innovations covered by the Licensed Rights and to make and sell Licensed Products. Company will have no obligation to prepare commercialization reports in years where (a) Company delivers to University a written Sales Report with active sales, and (b) Company has fulfilled all Performance Milestones. In relation to each of the Performance Milestones each commercialization report will include sufficient information to demonstrate achievement of those Performance Milestones and will set out timeframes and plans for achieving those Performance Milestones which have not yet been met.
SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work.
4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work.
4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged.
4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents.
4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents.
4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof.
4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals.
4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.
Research Use Reporting To assure adherence to NIH GDS Policy, the PI agrees to provide annual Progress Updates as part of the annual Project Renewal or Project Close-out processes, prior to the expiration of the one (1) year data access period. The PI who is seeking Renewal or Close-out of a project agree to complete the appropriate online forms and provide specific information such as how the data have been used, including publications or presentations that resulted from the use of the requested dataset(s), a summary of any plans for future research use (if the PI is seeking renewal), any violations of the terms of access described within this Agreement and the implemented remediation, and information on any downstream intellectual property generated from the data. The PI also may include general comments regarding suggestions for improving the data access process in general. Information provided in the progress updates helps NIH evaluate program activities and may be considered by the NIH GDS governance committees as part of NIH’s effort to provide ongoing stewardship of data sharing activities subject to the NIH GDS Policy.
PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.
