REGULATIONS AND CODE COMPLIANCE Sample Clauses

REGULATIONS AND CODE COMPLIANCE. A. The Contractor will comply with all applicable governmental regulations including Federal, State, City, and local applicable codes and ordinances. B. References to codes and standards called for in the Specifications refer to the latest edition, amendments, and revisions to the codes and standards in effect on the date of these Specifications. C. All work and materials shall conform to and be installed, inspected and tested in accordance with federal, state and local governmental agencies, including, but not limited to the following: 1. ANSI/NFPA-70, 2017 -- National Electrical Code (NEC). 2. Underwriter’s Laboratories, Inc. (UL). 3. Federal Communications Commission (FCC). 4. Americans with Disabilities Act (ADA).
Sample 1
AutoNDA by SimpleDocs
REGULATIONS AND CODE COMPLIANCE. A. The Contractor will comply with all applicable governmental regulations including Federal, State, City, and Local applicable codes and ordinances. B. References to codes and standards called for in the Specifications refer to the latest edition, amendments, and revisions to the codes and standards in effect on the date of these Specifications. C. All work and materials shall conform to and be installed, inspected and tested in accordance with the governing rules and regulations of the telecommunications industry, as well as federal, state and local governmental agencies, including, but not limited to the following: 1. ANSI/TIA-568.0-E: Generic Telecommunications Cabling for Customer Premises (Revision E, March 2020). 2. ANSI/TIA-568.1-E: Commercial Building Telecommunications Infrastructure Standard (Revision E, March 2020). 3. ANSI/TIA-568.2-D: Balanced Twisted-Pair Telecommunications Cabling And Components Standards (Revision D, September 2018). 4. ANSI/TIA-568.3-D: Optical Fiber Cabling and Component Standard (Revision D, October 2016). 5. ANSI/TIA-569-E: Telecommunications Pathways and Spaces (Revision E, May 2019) 6. ANSI/TIA-598-D: Optical Fiber Cable Color Coding (Revision D, July 2014). 7. ANSI/TIA-606-D: Administration Standard for Telecommunications Infrastructure (Revision D, October 2021). 8. ANSI/TIA-607-D: Generic Telecommunications Bonding and Grounding (Earthing) for Customer Premises (Revision D, July 2019). 9. ANSI/TIA-758-B: Customer-Owned Outside Plant Telecommunications Infrastructure Standard (Revision B, March 2012). 10. ANSI TIA-526-7-A: Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant (Revision A, July 2015). 11. ANSI/TIA-1152-A: Requirements for Field Test Instruments and Measurements for Balanced Twisted-Pair Cabling (Revision A, November 2016). 12. ANSI/NFPA-70, 2017 -- National Electrical Code (NEC). 13. Underwriter’s Laboratories, Inc. (UL). 14. Federal Communications Commission (FCC). 15. Americans with Disabilities Act (ADA).
Sample 1
REGULATIONS AND CODE COMPLIANCE. A. Materials and work specified herein shall comply with the requirements of Specification Section 27 01 00 and in particular the following standards and code requirements: 1. ANSI/TIA-568.0-E: Generic Telecommunications Cabling for Customer Premises (Revision E, March 2020). 2. ANSI/TIA-568.1-E: Commercial Building Telecommunications Infrastructure Standard (Revision E, March 2020). 3. ANSI/TIA-568.2-D: Balanced Twisted-Pair Telecommunications Cabling And Components Standards (Revision D, September 2018). 4. ANSI/TIA-568.3-D: Optical Fiber Cabling and Component Standard (Revision D, October 2016). 5. ANSI/TIA-606-D: Administration Standard for Telecommunications Infrastructure (Revision D, October 2021). 6. ANSI TIA-526-7-A: Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant (Revision A, July 2015). 7. ANSI/TIA-1152-A: Requirements for Field Test Instruments and Measurements for Balanced Twisted-Pair Cabling (Revision A, November 2016). 8. Underwriter’s Laboratories, Inc. (UL).
Sample 1
REGULATIONS AND CODE COMPLIANCE. A. Materials and work specified herein shall comply with the requirements of Specification Section 27 01 00 and in particular the following standards and code requirements: 1. ANSI/TIA-568.0-E: Generic Telecommunications Cabling for Customer Premises (Revision E, March 2020). 2. ANSI/TIA-568.1-E: Commercial Building Telecommunications Infrastructure Standard (Revision E, March 2020). 3. ANSI/TIA-568.2-D: Balanced Twisted-Pair Telecommunications Cabling And Components Standards (Revision D, September 2018). 4. ANSI/TIA-569-E: Telecommunications Pathways and Spaces (Revision E, May 2019) 5. ANSI/TIA-606-D: Administration Standard for Telecommunications Infrastructure (Revision D, October 2021). 6. ANSI/TIA-607-D: Generic Telecommunications Bonding and Grounding (Earthing) for Customer Premises (Revision D, July 2019). 7. ANSI/NFPA-70, 2017 -- National Electrical Code (NEC). 8. Underwriter’s Laboratories, Inc. (UL).
Sample 1
REGULATIONS AND CODE COMPLIANCE. A. Materials and work specified herein shall comply with the requirements of Specification Section 27 01 00 and in particular the following standard and code requirements: 1. ANSI/TIA-568.0-E: Generic Telecommunications Cabling for Customer Premises (Revision E, March 2020). 2. ANSI/TIA-568.1-E: Commercial Building Telecommunications Infrastructure Standard (Revision E, March 2020). 3. ANSI/TIA-568.2-D: Balanced Twisted-Pair Telecommunications Cabling And Components Standards (Revision D, September 2018). 4. ANSI/TIA-568.3-D: Optical Fiber Cabling and Component Standard (Revision D, October 2016). 5. ANSI/TIA-569-E: Telecommunications Pathways and Spaces (Revision E, May 2019) 6. ANSI/TIA-606-D: Administration Standard for Telecommunications Infrastructure (Revision D, October 2021). 7. ANSI/TIA-607-D: Generic Telecommunications Bonding and Grounding (Earthing) for Customer Premises (Revision D, July 2019). 8. ANSI/TIA-758-B: Customer-Owned Outside Plant Telecommunications Infrastructure Standard (Revision B, March 2012). 9. ANSI TIA-526-7-A: Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant (Revision A, July 2015). 10. ANSI/TIA-526-14-C: Optical Power Loss Measurement of Installed Multimode Fiber Cable Plant (Revision C, 2015). 11. ANSI/NFPA-70, 2017 -- National Electrical Code (NEC). 12. Underwriter’s Laboratories, Inc. (UL).
Sample 1
REGULATIONS AND CODE COMPLIANCE. Materials and work specified herein shall comply with the requirements of Specification Section 27 01 00 and in particular the following standards and code requirements:
Sample 1
REGULATIONS AND CODE COMPLIANCE. A. Reference to codes, standards, specifications and recommendations of technical societies, trade organizations and governmental agencies shall mean that latest edition of such publications adopted and published prior to submittal of the bid. Consider such codes or standards a part of this Specification as though fully repeated herein. B. Perform all work in accordance with governing codes, rules and regulations including but not limited to the following: 1. National Electrical Manufacturers Association (NEMA): a. TC-3-04 PVC Fittings for Use with Rigid PVC Conduit and Tubing b. FB1-07 Fittings, Cast Metal Boxes and Conduit Bodies for Conduit, Electrical Metallic Tubing and Cable 2. National Fire Protection Association (NFPA):
Sample 1
AutoNDA by SimpleDocs

Related to REGULATIONS AND CODE COMPLIANCE

  • Compliance with Texas Privacy Laws and Regulations In performing their respective obligations under the Agreement, the LEA and the Provider shall comply with all Texas laws and regulations pertaining to LEA data privacy and confidentiality, including but not limited to the Texas Education Code Chapter 32, and Texas Government Code Chapter 560.

  • Compliance with Statutes, Regulations, Etc The Borrower will, and will cause each Subsidiary to, comply with all applicable laws, rules, regulations and orders applicable to it or its property, including all governmental approvals or authorizations required to conduct its business, and to maintain all such governmental approvals or authorizations in full force and effect, in each case except where the failure to do so could not reasonably be expected to have a Material Adverse Effect.

  • Compliance with Applicable Laws and Regulations (a) To the best of Borrower’s knowledge after due inquiry and investigation, each of the following is true: (i) All Improvements and the use of the Mortgaged Property comply with all applicable statutes, rules and regulations, including all applicable statutes, rules and regulations pertaining to requirements for equal opportunity, anti-discrimination, fair housing, environmental protection, zoning and land use (“legal, non-conforming” status with respect to uses or structures will be considered to comply with zoning and land use requirements for the purposes of this representation). (ii) The Improvements comply with applicable health, fire, and building codes. (iii) There is no evidence of any illegal activities relating to controlled substances on the Mortgaged Property. (b) Reserved.

  • COMPLIANCE WITH STATUTES AND REGULATIONS a) Contractor warrants and certifies that in the performance of this Contract, it will comply with all applicable statutes, rules, regulations and orders of the United States and the State of California and agrees to indemnify the State against any loss, cost, damage or liability by reason of Contractor’s violation of this provision. b) If this Contract is in excess of $554,000, it is subject to the requirements of the World Trade Organization (WTO) Government Procurement Agreement (GPA).

  • Compliance with Governmental Regulations Landlord and Tenant shall comply with all rules, regulations and requirements promulgated by national, state or local governmental agencies or utility suppliers concerning the use of utility services, including any rationing, limitation or other control. Tenant shall not be entitled to terminate this Lease nor to any abatement in rent by reason of such compliance.

  • Compliance with Accessibility Standards All parties to this Agreement shall ensure that the plans for and the construction of all projects subject to this Agreement are in compliance with standards issued or approved by the Texas Department of Licensing and Regulation (TDLR) as meeting or consistent with minimum accessibility requirements of the Americans with Disabilities Act (P.L. 101-336) (ADA).

  • Compliance with all Applicable Laws and Regulations Grantee must comply with all applicable federal, state and local laws, rules, regulations, and ordinances in administering CRF under this Agreement. Grantee acknowledges that this requirement includes, but is not limited to, compliance with all applicable federal, state, and local health and safety rules and regulations. Grantee’s failure to comply with any part of this provision is material and must be grounds for termination of this Agreement for cause by Florida Housing.

  • Standards Compliance Registry Operator shall comply with relevant existing RFCs and those published in the future by the Internet Engineering Task Force (IETF), including all successor standards, modifications or additions thereto relating to the DNS and name server operations including without limitation RFCs 1034, 1035, 1123, 1982, 2181, 2182, 2671, 3226, 3596, 3597, 4343, and 5966. DNS labels may only include hyphens in the third and fourth position if they represent valid IDNs (as specified above) in their ASCII encoding (e.g., “xn--ndk061n”).

  • Compliance with Data Protection Laws 2.1 bookinglab shall comply with its obligations under the Data Protection Laws as they apply to it as a Data Processor of the Customer Personal Data. 2.2 The Customer shall comply with its obligations under the Data Protection Laws as they apply to it as a Data Controller of the Customer Personal Data.

  • Compliance with Laws and Regulations A. The Parties shall comply with all applicable laws and regulations including, but not limited to, safety; security; export control; environmental; and suspension and debarment laws and regulations. Access by a Partner to NASA facilities or property, or to a NASA Information Technology (IT) system or application, is contingent upon compliance with NASA security and safety policies and guidelines including, but not limited to, standards on badging, credentials, and facility and IT system/application access. B. With respect to any export control requirements: 1. The Parties will comply with all U.S. export control laws and regulations, including the International Traffic in Arms Regulations (ITAR), 22 C.F.R. Parts 120 through 130, and the Export Administration Regulations (EAR), 15 C.F.R. Parts 730 through 799, in performing work under this Agreement or any Annex to this Agreement. In the absence of available license exemptions or exceptions, the Partner shall be responsible for obtaining the appropriate licenses or other approvals, if required, for exports of hardware, technical data and software, or for the provision of technical assistance. 2. The Partner shall be responsible for obtaining export licenses, if required, before utilizing foreign persons in the performance of work under this Agreement or any Annex under this Agreement, including instances where the work is to be performed on-site at NASA and where the foreign person will have access to export-controlled technical data or software. 3. The Partner will be responsible for all regulatory record-keeping requirements associated with the use of licenses and license exemptions or exceptions. 4. The Partner will be responsible for ensuring that the provisions of this Article apply to its Related Entities. C. With respect to suspension and debarment requirements: 1. The Partner hereby certifies, to the best of its knowledge and belief, that it has complied, and shall comply, with 2 C.F.R. Part 180, Subpart C, as supplemented by 2 C.F.R. Part 1880, Subpart C. 2. The Partner shall include language and requirements equivalent to those set forth in subparagraph C.1., above, in any lower-tier covered transaction entered into under this Agreement.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!