Reporting Technical Issues Sample Clauses

Reporting Technical Issues. Any errors or problems with the Tablet should be reported as soon as practical. Damage due to negligence will result in the student assuming the financial responsibility of replacement of the Tablet. Proper care of Tablets through the school year and returning at the end of the school year with all accessories are the responsibility of the student. Students not returning their Tablet will be assessed the value of a replacement and added to their school fees.
Sample 1
AutoNDA by SimpleDocs
Reporting Technical Issues. Any errors or problems with the devices should be reported as soon as possible. This can be done by emailing TECH (Technology Department) about the issue so it can be addressed in in a timely manner. Damage due to negligence will result in the staff assuming the financial responsibility of replacement of the devices. Staff are to return the devices to Campus Office upon leaving Colorado ISD. If you are just transferring to another campus, your devices will transfer with you. Laptops may not be purchased upon leaving the district. Laptops do however travel with the person it is assigned, so if your assignment changes and you move to a different campus, your laptop travels with you.
Sample 1
Reporting Technical Issues. Any errors or problems with the Chromebook should be reported as soon as practical. The following procedure should be exercised when reporting issues:
Sample 1
Reporting Technical Issues. Any errors or problems with the iPad should be reported as soon as possible. This can be done by informing the office/administration or designated person about the issue so it can be addressed in a timely manner. All syncing of the device will be handled through the school to ensure like applications and configurations are found on every device to maximize the potential of the device. Damage to the iPad may result in the student/parent assuming the full cost of replacing the iPad. Students taking the iPad from school property must sign and submit the Parent-Student “iPad User Agreement Form”. Student use of the iPad off school grounds may be revoked at any time by the administration or designated person.
Sample 1

Related to Reporting Technical Issues

  • Research Use Reporting To assure adherence to NIH GDS Policy, the PI agrees to provide annual Progress Updates as part of the annual Project Renewal or Project Close-out processes, prior to the expiration of the one (1) year data access period. The PI who is seeking Renewal or Close-out of a project agree to complete the appropriate online forms and provide specific information such as how the data have been used, including publications or presentations that resulted from the use of the requested dataset(s), a summary of any plans for future research use (if the PI is seeking renewal), any violations of the terms of access described within this Agreement and the implemented remediation, and information on any downstream intellectual property generated from the data. The PI also may include general comments regarding suggestions for improving the data access process in general. Information provided in the progress updates helps NIH evaluate program activities and may be considered by the NIH GDS governance committees as part of NIH’s effort to provide ongoing stewardship of data sharing activities subject to the NIH GDS Policy.

  • Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.

  • Technical Information The Employer agrees to provide to the Union such information that is available relating to employees in the bargaining unit, as may be required by the Union for collective bargaining purposes.

  • Patent Applications It is understood by the parties that, pursuant to the Baylor Technology Transfer Agreement, MAS has the initial responsibility for filing, prosecution and maintenance of Patents and Patent Applications covering the Baylor Technology. The parties agree that, as between MAS and CTI, MAS shall be responsible for deciding whether and how to file, prosecute and maintain the Patents and Patent Applications, provided that: (a) all decisions of MAS (whether substantive or procedural) concerning whether and how to file, prosecute and/or maintain any Patents and Patent Applications shall be acceptable to CTI, such acceptance not to be unreasonably withheld; (b) with respect to any action permitted under Section 5.5 of the Baylor Technology Transfer Agreement or Section 5.5 of this Agreement, MAS will use legal counsel reasonably acceptable to CTI; (c) MAS will provide CTI with (i) drafts of all filings relating to the Patents and Patent Applications and (ii) drafts of all correspondence to be sent by MAS to Baylor, the Patent and Trademark Office (the “PTO”) or any third party relating to the Patents and Patent Applications. Final versions of all such filings and correspondence shall be acceptable to CTI, such acceptance not to be unreasonably withheld; (d) MAS will promptly provide CTI with copies of any notices and other correspondence received by CTI from Baylor, the PTO or any other third party relating to the Patents and Patent Applications, including, but not limited to, any notices received by MAS pursuant to Section 5.5 of the Baylor Technology Transfer Agreement; (e) MAS will, if requested by CTI, provide notice to Baylor under any of the circumstances permitting notice pursuant to Section 5.5 of the Baylor Technology Transfer Agreement; (f) MAS agrees to cooperate with CTI to whatever extent is reasonably necessary to procure patent protection of any rights regarding the Licensed Technology and agrees to execute any and all documents to give CTI the full benefit of the sublicenses and licenses granted herein; (g) MAS represents and warrants that, as of the Effective Date, it has not received any notices from Baylor pursuant to Section 5.5(c) or Section 5.5(d) of the Baylor Technology Transfer Agreement. In the event MAS receives any notices from Baylor pursuant to Section 5.5(c) or Section 5.5(d) of the Baylor Technology Transfer Agreement after the Effective Date. MAS will provide a copy of such notice to CTI within five (5) business days of receipt of such notice by MAS. MAS will then take all actions requested by CTI to allow CTI to retain its rights granted under this Agreement, including, but not limited to, promptly notifying Baylor in the event CTI wishes MAS to proceed with any actions in connection with the Patents or Patent Applications.

  • Know-How The term “

  • Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.

  • Technical Interfaces 3.2.6.1 The Interconnection facilities provided by each Party shall be formatted using either Alternate Xxxx Inversion (AMI) line code with Superframe format framing or Bipolar 8-Zero Substitution with Extended Superframe (B8ZS ESF) format framing or any mutually agreeable line coding and framing.

  • Research Use The Requester agrees that if access is approved, (1) the PI named in the DAR and (2) those named in the “Senior/Key Person Profile” section of the DAR, including the Information Technology Director and any trainee, employee, or contractor1 working on the proposed research project under the direct oversight of these individuals, shall become Approved Users of the requested dataset(s). Research use will occur solely in connection with the approved research project described in the DAR, which includes a 1-2 paragraph description of the proposed research (i.e., a Research Use Statement). Investigators interested in using Cloud Computing for data storage and analysis must request permission to use Cloud Computing in the DAR and identify the Cloud Service Provider (CSP) or providers and/or Private Cloud System (PCS) that they propose to use. They must also submit a Cloud Computing Use Statement as part of the DAR that describes the type of service and how it will be used to carry out the proposed research as described in the Research Use Statement. If the Approved Users plan to collaborate with investigators outside the Requester, the investigators at each external site must submit an independent DAR using the same project title and Research Use Statement, and if using the cloud, Cloud Computing Use Statement. New uses of these data outside those described in the DAR will require submission of a new DAR; modifications to the research project will require submission of an amendment to this application (e.g., adding or deleting Requester Collaborators from the Requester, adding datasets to an approved project). Access to the requested dataset(s) is granted for a period of one (1) year, with the option to renew access or close-out a project at the end of that year. Submitting Investigator(s), or their collaborators, who provided the data or samples used to generate controlled-access datasets subject to the NIH GDS Policy and who have Institutional Review Board (IRB) approval and who meet any other study specific terms of access, are exempt from the limitation on the scope of the research use as defined in the DAR.

  • Patent Rights The State and the U. S. Department of Transportation shall have the royalty free, nonexclusive and irrevocable right to use and to authorize others to use any patents developed by the Engineer under this contract.

  • Patents and Patent Applications To the Company’s knowledge, all patents and patent applications owned by or licensed to the Company or under which the Company has rights have been duly and properly filed and maintained; to the knowledge of the Company, the parties prosecuting such applications have complied with their duty of candor and disclosure to the USPTO in connection with such applications; and the Company is not aware of any facts required to be disclosed to the USPTO that were not disclosed to the USPTO and which could reasonably be expected to preclude the grant of a patent in connection with any such application or could reasonably be expected to form the basis of a finding of invalidity with respect to any patents that have issued with respect to such applications.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!