Sale of Products (a) All shipments, services, sales and quotations between Axitec, LLC. (“Seller”) and the purchaser (“Purchaser”) of Products set forth herein (“Products”) shall be subject to these Terms and Conditions of Sale (these “Terms” or this “Agreement”). Purchaser acknowledges receipt hereof and accepts these Terms. ANY ADDITIONAL OR DIFFERENT TERMS OR CONDITIONS CONTAINED IN ANY RESPONSE HERETO BY PURCHASER OR IN PURCHASER’S INITIAL ORDER AND ANY ASSERTIONS BY THE SALES REPRESENTATIVE THAT ARE NOT EXPRESSLY DESCRIBED IN THESE TERMS AND CONDITIONS OF SALE OUTSIDE OF THESE EXPRESSED TERMS AND CONDITIONS ARE HEREBY REJECTED BY SELLER AND SHALL BE OF NO EFFECT NOR IN ANY CIRCUMSTANCES BINDING ON SELLER. Seller’s acceptance of any order offered by Purchaser is EXPRESSLY MADE CONDITIONAL on Purchaser’s assent to these Terms, and under no circumstances will any terms other than these Terms apply to Seller’s sale of the Products.
(b) Seller’s quotations are not binding on Seller after 10 business days of submission of quotation. Each order of Products shall be in writing and no order of Purchaser shall be binding on Seller until the earlier of (i) payment of products has occurred or payment terms have been established and shipping arrangements have been made (ii) shipment to Purchaser of Products or (iii) transmittal of a written acceptance by Seller. Seller’s failure to respond to Purchaser’s order within two (2) weeks after receipt of the order shall be considered a rejection of the order.
(c) Purchaser may cancel any order before it has become binding pursuant to subsection (b) above. Seller may cancel all accepted orders and deliveries of Products if (i) Purchaser makes an assignment for the benefit of creditors, (ii) becomes party to a voluntary or involuntary proceeding of insolvency, bankruptcy or reorganization, (iii) generally becomes unable to pay its debts as they become due, (iv) fails to remit payment to Seller in accordance with the terms hereof or under any other agreement between Seller and Purchaser, or (v) breaches any other term, provision or condition contained in these Terms.
(vi) in cases where fraud and deceit is evident in the payment of products
(d) All references in sales brochures, data sheets and offers as to specifications, price and other details of the Products are approximate and shall not be binding on the Seller unless expressly agreed to in writing. Seller may, from time to time, update and replace Products in its line. Seller reserves the right to substitute updated Products, provided that such updated Products meet the specifications of the ordered Products in all material respects and are sold for the same price as the ordered Products.
(e) Purchaser acknowledges that Seller’s acceptance of any purchase order is dependent on Seller’s prior approval of Purchaser’s business credit and personal credit with personal guarantee where warranted. Purchaser acknowledges that Seller may demand assurances of Purchaser’s ability to pay by requesting such trade or banking references or a letter of credit or such other information as deemed adequate by Seller.
Purchase and Sale of Products (a) Pursuant to Purchase Orders issued by MLNA/MLMX, Supplier shall sell and deliver to MLNA/MLMX, and MLNA/MLMX shall purchase from Supplier, Products specified in Purchase Orders. Such purchases and sales shall be for Products and Prices set forth on Schedule A. Any Affiliate of MLNA/MLMX shall also be entitled to issue Purchase Orders and purchase Products from Supplier under the terms of this Agreement. Only the specific MLNA/MLMX Party issuing a Purchase Order will be liable to Supplier for obligations in connection with a Purchase Order. Neither MLNA or MLMX or any Affiliate of either of them will be liable to Supplier for any obligations of any other MLNA/MLMX Party or Affiliate.
(b) During the term hereof, MLNA/MLMX may, but shall not be required to, provide Supplier with estimates or forecasts of MLNA/MLMX´s requirements for Products from Supplier. Any forecasts or estimates are for information purposes only and may be modified by MLNA/MLMX at any time and in its sole discretion. Any product quantities cited in or pursuant to this Agreement, except for quantities cited in a Purchase Order as firm, are preliminary and non-binding only. MLNA/MLMX makes no representation, warranty or agreement as to the quantity of products that it will purchase from Supplier, if any, or that MLNA/MLMX will buy Products exclusively from Supplier.
(c) MLNA/MLMX shall issue Purchase Orders to Supplier and Supplier shall confirm to MLNA/MLMX the receipt of each Purchase Order issued hereunder (each, a "Confirmation") within [NUMBER] Business Days following Supplier's receipt thereof. Each Confirmation must reference MLNA/MLMX's Purchase Order number and confirm acceptance of the Purchase Order unless Supplier timely advises MLNA/MLMX that Supplier is unwilling to accept any terms or conditions in the applicable Purchase Order that conflict with the terms and conditions of this Agreement. If Supplier fails to issue a Confirmation within the time set forth above or otherwise commences performance under such Purchase Order, Supplier will be deemed to have accepted the Purchase Order. MLNA/MLMX may withdraw any Purchase Order prior to Supplier's acceptance (or deemed acceptance) thereof.
(d) MLNA/MLMX may, in its sole discretion, on notice to Supplier, without liability or penalty, terminate all or any part of a Purchase Order with or without cause effective immediately or otherwise as specified in such notice. Upon any such termination, Supplier shall immediately cease work and purchasing materials relating to fulfilling the Purchase Order, and deliver to MLNA/MLMX on request all or any portion of Products under the relevant Purchase Order at the Prices.
(e) MLNA/MLMX may, on notice to Supplier, request changes to a Purchase Order. On or before the second Business Day after receiving the request, Supplier shall submit to MLNA/MLMX its good faith description of the impact of such changes on the Basic Purchase Order Terms. MLNA/MLMX may then submit an amended Purchase Order reflecting all MLNA/MLMX-accepted changes.
By Distributor Distributor shall indemnify and hold harmless NW and each person who controls or is associated with NW within the meaning of such terms under the federal securities laws, and any officer, director, employee of NW or agent of the foregoing, against any and all joint or several losses, claims, damages or liabilities (including any investigative, legal and other expenses reasonably incurred in connection with, and any amounts paid in settlement of, any action, suit or proceeding or any claim asserted), to which NW and/or any such person may become subject under any statute or regulation, any NASD Rule or interpretation, at common law or otherwise, insofar as such losses, claims, damages or liabilities:
(1) arise out of or are based upon any untrue statement or alleged untrue statement of a material fact or omission or alleged omission to state a material fact required to be stated therein or necessary in order to make the statements therein not misleading, in light of the circumstances in which they were made, contained in (i) any Registration Statement or in any Prospectus required to be filed by NW; (ii) any state blue-sky application or (iii) any other document executed by NW specifically for the purpose of qualifying any or all of the Contracts for sale under the securities laws of any jurisdiction. In each case to the extent, but only to the extent, that such untrue statement or alleged untrue statement or omission or alleged omission was made in reliance upon information furnished in writing by Distributor to NW specifically for use in the preparation of any such Registration Statement or any such state blue-sky application or any amendment thereof or supplement thereto, or in any Prospectus required to be filed by NW;
(2) result because of any use by Distributor or its Representatives of promotional, sales or advertising material not authorized by NW or any verbal or written misrepresentations by Distributor or its Representative or any unlawful sales practices concerning the Contracts by Distributor or its Representatives under federal securities laws or NASD Rules;
(3) result from any breach by Distributor of any provision of this Agreement; or
(4) result from Distributor’s own misconduct or negligence. This indemnification shall be in addition to any liability that Distributor may otherwise have; provided, however, that no person shall be entitled to indemnification pursuant to this provision if such loss, claim, damage or liability is due to the willful misfeasance, bad faith, negligence or reckless disregard of duty by the person seeking indemnification.
Purchase of Products You agree to purchase from Us the hardware products, software licenses and services listed on the Order Form, together with all existing accessories, attachments, replacements, and additions (collectively the “Products”) upon the terms stated herein. For the avoidance of doubt, postage meters for use in mailing machines are excluded from the definition of Products. This Purchase Agreement is binding on You as of the date You sign it. This Purchase Agreement is not binding on Us until We sign it or until the Products are shipped, whichever happens first.
Distributor The Trust hereby appoints the Distributor as general distributor of shares of beneficial interest (“Series shares”) of the Trust’s WCM Funds series (the “Series”) during the term of this Agreement. The Trust reserves the right, however, to refuse at any time or times to sell any Series shares hereunder for any reason deemed adequate by the Board of Trustees of the Trust.
Use of Products 3.28.1 In the performance of this contract, Consultant shall make maximum use of products containing recovered materials that are EPA-designated items unless the product cannot be acquired (i) competitively within a timeframe providing for compliance with the contract performance schedule; (ii) meeting contract performance requirements; or (iii) at a reasonable price.
3.28.2 Consultant shall abide by the list of EPA-designated items available on EPA’s Comprehensive Procurement Guidelines web site: xxxxx://xxx.xxx.xxx/smm/comprehensive-procurement-guideline-cpg-program.
Sale of Placement Shares by Agent Subject to the provisions of Section 5(a), the Agent, for the period specified in the Placement Notice, will use its commercially reasonable efforts consistent with its normal trading and sales practices and applicable state and federal laws, rules and regulations and the rules of the NASDAQ Global Market (the “Exchange”), to sell the Placement Shares up to the amount specified, and otherwise in accordance with the terms of such Placement Notice. The Agent will provide written confirmation to the Company no later than the opening of the Trading Day (as defined below) immediately following the Trading Day on which it has made sales of Placement Shares hereunder setting forth the number of Placement Shares sold on such day, the compensation payable by the Company to the Agent pursuant to Section 2 with respect to such sales, and the Net Proceeds (as defined below) payable to the Company, with an itemization of the deductions made by the Agent (as set forth in Section 5(b)) from the gross proceeds that it receives from such sales. Subject to the terms of the Placement Notice, the Agent may sell Placement Shares by any method permitted by law deemed to be an “at the market” offering as defined in Rule 415 of the Securities Act Regulations, including without limitation sales made directly on the Exchange, on any other existing trading market for the Common Stock or to or through a market maker. Subject to the terms of a Placement Notice, the Agent may also sell Placement Shares by any other method permitted by law, including but not limited to in privately negotiated transactions. “Trading Day” means any day on which Common Stock is traded on the Exchange.
Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.
Supply of Product 4.1 DAEWOONG shall manufacture and supply Product to AEON in a primary packaged and labeled form. Product packaging shall display the logo of DAEWOONG (to the extent required by applicable law) and AEON and the outer label shall be marked using English language in accordance with applicable laws and Product’s Regulatory Approvals.
4.2 AEON’s estimate sales forecast of the Product during the Term of Agreement in the Territory in the Field is set forth in Annex D. Within ninety (90) days after the Effective Date, AEON shall provide DAEWOONG with a non-binding twelve (12) month rolling forecast of its requirements of Product, which the Parties agree is not a commitment to buy any stated quantity. Thereafter, on at least a quarterly basis, AEON shall provide DAEWOONG with an updated twelve (12) month rolling forecast, together with a binding six (6) month forecast to the extent AEON has requested Safety Stock as described in Article 4.10 below. Each such forecast shah be referred to herein as a “Forecast.”
4.3 AEON may from time to time submit Purchase Orders to DAEWOONG for Product in accordance with the forecasting requirements in Article 4.2. Orders will be shipped on CIF Los Angeles port.
4.4 Once a Purchase Order for Product and Product Samples has been received by DAEWOONG, it shall be considered as irrevocable.
4.5 AEON agrees herein to place an Order for Product not later than [***] from receipt of Regulatory Approval.
4.6 Individual Purchase Orders of Product shall be placed at least [***] in advance of the required delivery date.
4.7 For the purpose of Commercialization, AEON will store and maintain the full quantity of Product in a clean, secured area in accordance with the reasonable directions and specifications provided by DAEWOONG in writing in connection thereof in the Territory. AEON will advise DAEWOONG on the applicable requirements specifically deriving from the laws and regulations in the Territory.
4.8 AEON agrees that DAEWOONG and its collaborators and agents, in DAEWOONG’s sole discretion, which collaborators and Agents will be subject to appropriate obligations of confidentiality, will have the right upon reasonable prior notice, to observe and to inspect and to audit AEON’s facility to ascertain compliance by AEON with the terms of this Agreement, including without limitation (a) the holding facilities for Product, and (b) AEON’s compliance with applicable law, including cGMP (if applicable). Following any such audit, DAEWOONG will discuss its observations and conclusions with AEON and corrective actions, if any, will be agreed upon by the Parties, and executed by AEON using Commercially Reasonable Efforts.
4.9 In addition to any other rights and remedies available to AEON, AEON shall have the right to recover lost profits in the event that DAEWOONG fails to deliver at least [***] in any [***] (a “Supply Default Event”). For purposes of this provision, lost profits would be equal to [***] of AEON operating profit (sales less direct expenses and the puce paid by AEON for such Products) on Products that have not been shipped against firm Purchase Orders during the period leading up to the Supply Default Event and bona fide Purchase Orders submitted by AEON that are consistent with the Forecast during the Supply Default Period (as defined below). Such payment shall be made with respect to all Product not shipped in the period giving rise to the Supply Default and for the period until DAEWOONG is again timely shipping Product to meet AEON’s needs (the “Supply Default Period”). The first such payment shall be made within [***] of the Supply Default Event, and every [***] thereafter. AEON agrees to permit full disclosure to DAEWOONG of AEON’s accounting records, solely related to the calculation of lost profits, for the [***] ending on the first day of the month in which the Supply Event Default occurred. In the event that DAEWOONG is unable to supply both AEON’s requirements of Product and its own and third parties’ requirements for Product, DAEWOONG shall allocate Product that DAEWOONG has in inventory and that DAEWOONG is able to Product, so that AEON receives its requirements of Product in priority to DAEWOONG and third parties.
4.10 At the request of AEON, DAEWOONG shall at its own cost and expense during the Term, maintain an amount of inventory of Product equal to AEON’s requirements for Product for [***] based on AEON’s most recent forecast (“Safety Stock”). The Safety Stock shall be (i) maintained for the sole benefit of AEON and its Affiliates, (ii) shall be stored at a secure facility in compliance with GMP, and (iii) shall not be used for the benefit of any other customer of DAEWOONG. DAEWOONG shall rotate the Safety Stock on a “First Expiry-First Out” basis for routine fulfillment of firm orders, subject to Article 7.
Supply of Products
3.1 The Supplier warrants that the Products shall:
(a) correspond with their description and any applicable Product Specification;
(b) conform in all respects with the Order and any relevant sample;
(c) be of satisfactory quality and fit for any purpose held out by the Supplier or made known to the Supplier by Ornua, expressly or by implication, and in this respect Ornua relies on the Supplier's skill and judgement;
(d) be manufactured by properly trained and qualified personnel using all reasonable skill, care and diligence and in a good and workmanlike manner;
(e) where they are manufactured products, be free from defects in design, materials and workmanship and remain so for the period set out in the Product Specification or, if none is specified, for at least 12 months after delivery;
(f) comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Products;
(g) comply with all relevant standards including any UK Standards, European Standards or International Standards applicable in the UK and the country or State where the Products are to be used; and
(h) in the case of Products containing food stuffs, when delivered to Ornua, comply with all applicable food and hygiene legislation and regulations and best industry practice.
3.2 The Supplier shall ensure that at all times it has and maintains all licences, permissions, authorisations, consents and permits needed to carry out its obligations under the Contract in respect of the supply of Products. Breach of this Condition shall be deemed a material breach of the Contract.
3.3 Ornua may inspect and test the Products at any time before delivery. The Supplier shall remain fully responsible for the Products despite any such inspection or testing and any such inspection or testing shall not reduce or otherwise affect the Supplier's obligations under the Contract.
3.4 If following such inspection or testing Ornua considers that the Products do not comply or are unlikely to comply with the Supplier's undertakings at clause 3.1, Ornua shall inform the Supplier and the Supplier shall immediately take such remedial action as is necessary to ensure compliance.
3.5 Ornua may conduct further inspections and tests after the Supplier has carried out its remedial actions.
