Responsibility for Materials. The University does not assume any responsibility for the suitability or availability of any controlled materials or other materials and equipment required for the work. The ESCO shall be responsible for the contracted quality and standards of all materials, components or completed work furnished by the ESCO pursuant to the terms hereof. Materials, components or completed work which fails to comply with this Agreement and the Project Documents may be rejected by the University during the term of this agreement and shall be replaced by the ESCO at no cost to the University. The ESCO shall remove from the Facility within a reasonable time any materials or components so rejected at the entire expense of the ESCO, after written notice has been delivered by the University to the ESCO that such materials or components have been rejected.
Responsibility for Materials disclosure
(1) The custodian to whom any documentary material, answers to interrogatories, or xxxx- scripts of oral testimony are delivered shall take physical possession thereof, and shall be re- sponsible for the use made thereof and for the return of documentary material, pursuant to this chapter.
(2) The custodian may cause the preparation of such copies of such documentary material, answers to interrogatories, or transcripts of oral testimony as may be required for official use by any duly authorized official, employee, or agent of the Department of Justice under regulations which shall be promulgated by the Attorney General. Notwithstanding paragraph (3) of this subsection, such material, answers, and xxxx- scripts may be used by any such official, em- ployee, or agent in connection with the taking of oral testimony pursuant to this chapter.
(3) Except as otherwise provided in this sec- tion, while in the possession of the custodian, no documentary material, answers to interrog- atories, or transcripts of oral testimony, or cop- ies thereof, so produced shall be available for ex- amination, without the consent of the person who produced such material, answers, or xxxx- scripts, and, in the case of any product of dis- covery produced pursuant to an express demand for such material, of the person from whom the discovery was obtained, by any individual other than a duly authorized official, employee, or agent of the Department of Justice. Nothing in this section is intended to prevent disclosure to either body of the Congress or to any authorized committee or subcommittee thereof.
(4) While in the possession of the custodian and under such reasonable terms and conditions as the Attorney General shall prescribe, (A) doc- umentary material and answers to interrog- atories shall be available for examination by the person who produced such material or answers, or by any duly authorized representative of such person, and (B) transcripts of oral testimony 1 See References in Text note below. shall be available for examination by the person who produced such testimony, or his counsel.
Responsibility for Materials. Once Recyclable Materials, Organic Materials, Solid Waste, and/or C&D are placed in Containers serviced by the Contractor and at the Collection location, the responsibility for their proper handling shall transfer directly from the Generator to Contractor, with the exception of Excluded Materials if the Contractor can identify the Generator pursuant to Section 5.3.B. Once Recyclable Materials, Organic Materials, Solid Waste, and or C&D are deposited by Contractor at the appropriate Designated Facility or Approved Facility, such materials shall become the responsibility of the Owner or operator of the Designated Facility or Approved Facility with the exception of Excluded Materials pursuant to Section 5.3. Responsibility for Excluded Materials that have been inadvertently Collected by the Contractor shall remain with the Contractor if it cannot identify the Generator, and Contractor shall assume all responsibility for its proper Disposal.
Responsibility for Materials. 337 Should Council act to retain non-exclusive construction and demolition material (C&D) system, Section 338 3.6 will be modified to remove “C&D” from the exclusive services provided by Contractor. 339 Once Solid Waste, Recyclable Materials, Organic Materials, and C&D are placed in the Contractor’s 340 Containers and at the Collection location, the responsibility for their proper handling shall transfer directly 341 from the Generator to Contractor, with the exception of Excluded Waste if the Contractor can identify the 342 Generator pursuant to Section 5.7.B. Once Solid Waste, Recyclable Materials, Organic Materials, C&D and 343 street sweepings are deposited by Contractor at the appropriate Approved Facility, such materials shall 344 become the responsibility of the Owner or operator of the Approved Facility including the Disposal 345 Contractor in the case of Disposal, with the exception of Excluded Waste pursuant to Section 5.7.C. 346 Responsibility for Excluded Waste that has been inadvertently Collected by the Contractor shall remain 347 with the Contractor if it cannot identify the Generator, and Contractor shall assume all responsibility for 348 its proper Disposal.
Responsibility for Materials. The INSTITUTION does not assume any responsibility for the availability of any controlled materials or other materials and equipment required for the Work. However, INSTITUTION reserves the right to review and approve the quality and standards for all materials. The COMPANY shall be responsible for the contracted quality and standards of all materials, components or completed Work furnished by the COMPANY pursuant to the terms hereof. Materials, components or completed Work which fails to comply with this Agreement and the Project Documents may be rejected by the INSTITUTION and shall be replaced by the COMPANY at no cost to the INSTITUTION. The COMPANY shall remove from the Premises within a reasonable time any materials or components so rejected at the entire expense of the COMPANY, after written notice has been delivered by the INSTITUTION to the COMPANY that such materials or components have been rejected. (OPTIONAL)
Responsibility for Materials. Once Recyclable Materials, Organic Materials, and/or Solid Waste are placed in the Contractor’s Containers and at the Collection location, the responsibility for their proper handling shall Transfer directly from the Generator to Contractor, with the exception of Excluded Waste if the Contractor can identify the Generator pursuant to Section 5.8.B. Once Recyclable Materials, Organic Materials, and/or Solid Waste are deposited by Contractor at the appropriate Approved Facility, such materials shall become the responsibility of the Owner or operator of the Approved Facility except for Excluded Waste pursuant to Section 5.8.C. Responsibility for Excluded Waste that has been inadvertently Collected by the Contractor shall remain with the Contractor if it cannot identify the Generator, and Contractor shall assume all responsibility for its proper Disposal.
Responsibility for Materials. In connection with the Work, Fitch shall neither be responsible for nor guarantee any fabric, material, software component, product, or article against wearing, fading, or latent defects.
Responsibility for Materials. The ISSUERCUSTOMER does not assume any responsibility for the availability of any controlled materials or other materials and equipment required for the Work. However, ISSUERCUSTOMER reserves the right to review and approve the quality and standards for all materials. The ESCOCOMPANY shall be responsible for the contracted quality and standards of all materials, components or completed Work furnished by the ESCOCOMPANY pursuant to the terms hereof. Materials, components or completed Work which fails to comply with this Agreement and the Project Documents may be rejected by the ISSUERCUSTOMER and shall be replaced by the ESCOCOMPANY at no cost to the ISSUERCUSTOMER. The ESCOCOMPANY shall remove from the Premises within a reasonable time any materials or components so rejected at the entire expense of the ESCOCOMPANY, after written notice has been delivered by the ISSUERCUSTOMER to the ESCOCOMPANY that such materials or components have been rejected. \
Responsibility for Materials. 1002 Once Discarded Materials are placed in the Contractor’s or other approved Containers and at the 1003 Collection location, or is otherwise set-out for Collection in an approved manner, the responsibility for 1004 their proper handling shall transfer directly from the generator to Contractor, with the exception of 1005 Hazardous Waste if the Contractor can identify the generator. Once Discarded Materials are deposited 1006 by Contractor at an Approved Facility, such materials shall become the responsibility of the owner or 1007 operator of the Approved Facility. Responsibility for Hazardous Waste that has been inadvertently 1008 collected by the Contractor shall remain with the Contractor if it cannot identify the generator, and
Responsibility for Materials. The CUSTOMER does not assume any responsibility for the availability of any controlled materials or other materials and equipment required for the Work. However, CUSTOMER reserves the right to review and approve the quality and standards for all materials. The COMPANY shall be responsible for the contracted quality and standards of all materials, components or completed Work furnished by the COMPANY pursuant to the terms hereof. Materials, components or completed Work which fails to comply with this Agreement and the Project Documents may be rejected by the CUSTOMER and shall be replaced by the COMPANY at no cost to the CUSTOMER. The COMPANY shall remove from the Premises within a reasonable time any materials or components so rejected at the entire expense of the COMPANY, after written notice has been delivered by the CUSTOMER to the COMPANY that such materials or components have been rejected. (Optional)
