Testing of Metering Equipment Connecting Transmission Owner shall inspect and test all of its Metering Equipment upon installation and at least once every two (2) years thereafter. If requested to do so by NYISO or Developer, Connecting Transmission Owner shall, at Developer’s expense, inspect or test Metering Equipment more frequently than every two (2) years. Connecting Transmission Owner shall give reasonable notice of the time when any inspection or test shall take place, and Developer and NYISO may have representatives present at the test or inspection. If at any time Metering Equipment is found to be inaccurate or defective, it shall be adjusted, repaired or replaced at Developer’s expense, in order to provide accurate metering, unless the inaccuracy or defect is due to Connecting Transmission Owner’s failure to maintain, then Connecting Transmission Owner shall pay. If Metering Equipment fails to register, or if the measurement made by Metering Equipment during a test varies by more than two percent from the measurement made by the standard meter used in the test, Connecting Transmission Owner shall adjust the measurements by correcting all measurements for the period during which Metering Equipment was in error by using Developer’s check meters, if installed. If no such check meters are installed or if the period cannot be reasonably ascertained, the adjustment shall be for the period immediately preceding the test of the Metering Equipment equal to one-half the time from the date of the last previous test of the Metering Equipment. The NYISO shall reserve the right to review all associated metering equipment installation on the Developer’s or Connecting Transmission Owner’s property at any time.
Accessories, Spare Parts and Tools Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.
Spares/bunkers, etc The Sellers shall deliver the Vessel to the Buyers with everything belonging to her on board and on shore including all Owners’ supply items as per the Shipbuilding Contract. All spare parts and spare equipment including spare tail-end shaft(s) and/or spare propeller(s)/propeller blade(s), if any, belonging to the Vessel at the time of delivery used or unused, whether on board or not shall become the Buyers’ property, but spares on order are to be excluded. Forwarding charges, if any, shall be for the Buyers’ account. The Sellers are not required to replace spare parts including spare tail-end shaft(s) and spare propeller(s)/propeller blade(s) which are taken out of spare and used as replacement prior to delivery, but the replaced items shall be the property of the Buyers. The radio installation and navigational equipment shall be included in the sale without extra payment. Unused stores and provisions shall be included in the sale and be taken over by the Buyers without extra payment. The Sellers have the right to take ashore crockery, plates, cutlery, linen and other articles bearing the Sellers’ flag or name, provided they replace same with similar unmarked items. Library, forms, etc., exclusively for use in the Sellers’ vessel(s), shall be excluded without compensation. Captain’s, Officers’ and Crew’s personal belongings including the slop chest are to be excluded from the sale, as well as the following additional items (including items on hire): The Buyers shall take over the remaining bunkers and unused lubricating oils/greases on board at the time of delivery and pay the Sellers’ net price (excluding barging expenses) from the time of supply. Lubricating oils to be those in sealed drums and/or designated storage tanks not having been used or circulated in the vessel’s machinery. Payment under this Clause shall be made at the same time and place and in the same currency as the Purchase Price.
REQUIRED FOR PART 2 JOC - PRICING OF Regular Hours Coefficient What is your regular hours coefficient for the RS Means Price Book? (FAILURE TO RESPOND PROHIBITS PART 2 JOC EVALUATION)
Engines POSITION SERIAL NO. TOTAL HOURS TOTAL CYCLES HRS/CYCLES SINCE LAST SHOP VISIT Time Remaining to Next LIFE LIMITED PART REMOVAL PART NAME HOURS CYCLES MSN MSN
Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract.
a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract.
b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.
Spare Parts 14.1 As specified, the supplier may be required to provide any or all of the following materials, notifications, and information pertaining to spare parts manufactured or distributed by the supplier:
(a) such spare parts as the purchaser may elect to purchase from the supplier, provided that this election shall not relieve the supplier of any warranty obligations under the contract and;
(b) In the event of termination of production of the spare parts:
(i) advance notification to the purchaser of the pending termination, in sufficient time to permit the purchaser to procure needed requirements and;
(ii) Following such termination, furnishing at no cost to the purchaser, the blueprints, drawings, and specifications of the spare parts, if requested.
Installation requirements We (if we install the System) or our contractor (if we procure a contractor to install the System) must:
Substitution of Engines Upon the occurrence of an Event of Loss with respect to an Engine under circumstances in which an Event of Loss with respect to the Airframe has not occurred, Owner shall promptly (and in any event within 15 days after such occurrence) give the Mortgagee written notice of such Event of Loss. The Owner shall have the right at its option at any time, on at least 5 Business Days' prior notice to the Mortgagee, to substitute, and if an Event of Loss shall have occurred with respect to an Engine under circumstances in which an Event of Loss with respect to the Airframe has not occurred, shall within 60 days of the occurrence of such Event of Loss substitute, a Replacement Engine for any Engine. In such event, immediately upon the effectiveness of such substitution and without further act, (i) the replaced Engine shall thereupon be free and clear of all rights of the Mortgagee and the Lien of this Trust Indenture and shall no longer be deemed an Engine hereunder and (ii) such Replacement Engine shall become subject to this Trust Indenture and be deemed part of the Aircraft for all purposes hereof to the same extent as the replaced Engine. Such Replacement Engine shall be an engine manufactured by Engine Manufacturer that is the same model as the Engine to be replaced thereby, or an improved model, and that is suitable for installation and use on the Airframe, and that has a value, utility and remaining useful life (without regard to hours and cycles remaining until overhaul) at least equal to the Engine to be replaced thereby (assuming that such Engine had been maintained in accordance with this Trust Indenture). The Owner's right to make a replacement hereunder shall be subject to the fulfillment (which may be simultaneous with such replacement) of the following conditions precedent at the Owner's sole cost and expense, and the Mortgagee agrees to cooperate with the Owner to the extent necessary to enable it to timely satisfy such conditions:
(i) an executed counterpart of each of the following documents shall be delivered to the Mortgagee:
(A) a Trust Indenture Supplement covering the Replacement Engine, which shall have been duly filed for recordation pursuant to the Act or such other applicable law of the jurisdiction other than the United States in which the Aircraft of which such Engine is a part is registered in accordance with Section 4.02(e), as the case may be;
(B) a full warranty xxxx of sale (as to title), covering the Replacement Engine, executed by the former owner thereof in favor of the Owner (or, at the Owner's option, other evidence of the Owner's ownership of such Replacement Engine, reasonably satisfactory to the Mortgagee); and
(C) UCC financing statements covering the security interests created by this Trust Indenture (or any similar statements or other documents required to be filed or delivered pursuant to the laws of the jurisdiction in which such Aircraft may be registered) as are deemed necessary or desirable by counsel for the Mortgagee to protect the security interests of the Mortgagee in the Replacement Engine;
(ii) the Owner shall cause to be delivered to the Mortgagee an opinion of counsel to the effect that the Lien of this Trust Indenture continues to be in full force and effect with respect to the Replacement Engine and such evidence of compliance with the insurance provisions of Section 4.06 with respect to such Replacement Engine as Mortgagee shall reasonably request;
(iii) the Owner shall have furnished to Mortgagee an opinion of Owner's aviation law counsel reasonably satisfactory to Mortgagee and addressed to Mortgagee as to the due filing for recordation of the Trust Indenture Supplement with respect to such Replacement Engine under the Act or such other applicable law of the jurisdiction other than the United States in which the Aircraft is registered in accordance with Section 4.02(e), as the case may be; and
(iv) the Owner shall have furnished to Mortgagee a certificate of a qualified aircraft engineer (who may be an employee of Owner) certifying that such Replacement Engine has a value and utility and remaining useful life (without regard to hours and cycles remaining until overhaul) at least equal to the Engine so replaced (assuming that such Engine had been maintained in accordance with this Trust Indenture). Upon satisfaction of all conditions to such substitution, (x) the Mortgagee shall execute and deliver to the Owner such documents and instruments, prepared at the Owner's expense, as the Owner shall reasonably request to evidence the release of such replaced Engine from the Lien of this Trust Indenture, (y) the Mortgagee shall assign to the Owner all claims it may have against any other Person relating to any Event of Loss giving rise to such substitution and (z) the Owner shall receive all insurance proceeds (other than those reserved to others under Section 4.06(b)) and proceeds in respect of any Event of Loss giving rise to such replacement to the extent not previously applied to the purchase price of the Replacement Engine as provided in Section 4.05(d).
Replacement Parts Replacement parts for goods purchased by Buyer are for the purpose of this Section defined as “Parts” (and are also considered “goods” under this Order). Unless specified otherwise by Buyer in writing, Supplier shall provide Parts (or upon Buyer’s written consent, an alternative replacement part that provides the same form, fit and function as the Part(s)) for a period of twenty (20) years after production of the goods (into which the applicable Parts are incorporated) ceases. Supplier shall continue to supply such Parts past the twenty (20) year period if Buyer orders at least twenty (20) Parts per year during such twenty-year period. The prices for any Parts purchased in the first two (2) years of the twenty-year period shall not exceed those prices in effect at the time production of the goods ceases, and no set up charges shall be permitted by Supplier or paid by Xxxxx during this two-year period. Thereafter, the prices for Parts shall be negotiated based on Supplier’s actual cost of production of such Parts plus any special packaging costs. No minimum order requirements shall apply unless the parties mutually agree in advance. After the end of the twenty-year period, Supplier shall continue to maintain in good working condition all Supplier-owned tooling required to produce the Parts and shall not dispose of such tooling without offering Buyer the right of first refusal to purchase such tooling.
