SLEEVE BEARINGS Sample Clauses

SLEEVE BEARINGS a. With the bearing shells installed, bearings shall be checked for tolerances, concentricity and nip. On fitting of the rotor into the stator, bearing clearances and lay shall be checked to ensure correct fitting of the shell. b. “Blueing/Engineers Blue” and plastic gauges are to be used if the lay is not greater than 90%. The responsible engineer is be contacted for permission before any scrapping takes place. c. All joints, inlets, drain plugs etc. shall be sealed to prevent oil leaks. Copies of the blue prints are to be provided as part of data pack, together with copies of the measured bearing tolerances. d. Xxxxx xxxxx metal scratches shall be repaired by polishing the damaged surfaces with a polishing pad such as Scotch-brite ® cloth e. Major scoring and wipes on the white metal surfaces shall be repaired by replacing, or re-metalling the bearing. If the bearing needs to be re-metalled or replaced, an ultrasonic test shall be conducted on the re-metalled or replacement bearing white metal before bearing installation.
AutoNDA by SimpleDocs
SLEEVE BEARINGS. Horizontal motors shall have insulated, oil lubricated split sleeve bearings.

Related to SLEEVE BEARINGS

  • Wellness i. To support the statewide goal for a healthy and productive workforce, employees are encouraged to participate in a Well-Being Assessment survey. Employees will be granted work time and may use a state computer to complete the survey. ii. The Coalition of Unions agrees to partner with the Employer to educate their members on the wellness program and encourage participation. Eligible, enrolled subscribers who register for the Smart Health Program and complete the Well-Being Assessment will be eligible to receive a twenty-five dollar ($25) gift certificate. In addition, eligible, enrolled subscribers shall have the option to earn an annual one hundred twenty-five dollars ($125.00) or more wellness incentive in the form of reduction in deductible or deposit into the Health Savings Account upon successful completion of required Smart Health Program activities. During the term of this Agreement, the Steering Committee created by Executive Order 13-06 shall make recommendations to the PEBB regarding changes to the wellness incentive or the elements of the Smart Health Program.

  • Blasting Blasting shall be permitted only for road construction purposes unless advance permission is obtained from Forest Service. Whenever the Industrial Fire Precaution Level is II or greater, a fire security person equipped with a long handled round point No. 0 or larger shovel and a 5 gallon backpack pump can filled with water, will stay at location of blast for 1 hour after blasting is done. Blasting may be suspended by Forest Service, in areas of high rate of spread and resistance to control. Fuses shall not be used for blasting. Explosive cords shall not be used without permission of Forest Service, which may specify conditions under which such explosives may be used and precautions to be taken.

  • Rubric The rubrics are a scoring tool used for the Educator’s self-assessment, the formative assessment, the formative evaluation and the summative evaluation. The districts may use either the rubrics provided by ESE or comparably rigorous and comprehensive rubrics developed or adopted by the district and reviewed by ESE.

  • Insulation In exterior walls? Yes No Unknown In ceiling/attic? Yes No Unknown In any other areas? Yes No Where? Comments:

  • Safety Glasses Section 1. The City shall supply prescription safety glasses with plastic lenses to employees who are required to wear safety glasses and who are members of the classifications contained in Appendix C to this contract. Safety glasses which are authorized must be industrial grade safety glasses which meet or exceed the requirements of ANSI Specification Z87. 1. All employees who are required to wear safety glasses shall also be required to wear side xxxxxxx, either permanent or snap-on, whenever an eye hazard exists. Solid tinted glasses will not be approved unless required by prescription. Photogray, progressive, scratch coating and/or anti-glare lenses may be considered for those employees who primarily work outdoors or as prescribed. In the event that additional classes are identified as needing either prescription safety glasses or protective eyewear, such classes may be added to the classification list in Appendix C upon approval of PAGE and the City. Section 2. The City agrees to pay the full cost of required prescription safety glasses, with frames not to exceed $75.00. This excludes the cost of the eye examination which will be the responsibility of the employee. The effected employees will be allowed one (1) replacement of safety glasses every two (2) years. In the event the safety glasses become lost, unserviceable, or broken on the job, the employee must present a written request for replacement to the Department Head and Human Resources Director. If the employee breaks his safety glasses while on the job, the Department shall replace the glasses at no cost to the employee. The replacement of lost glasses or glasses that are broken off the job will be at the discretion of the Department Head and Human Resources Director. If an employee has been provided safety glasses by the City, the employee shall be permitted to retain possession of the glasses after separation from the City without reimbursing the City for any costs associated with the glasses. Section 3. An employee who is required to wear prescription safety glasses must present a written request to his department head or designated representative. Section 4. The employee must obtain a current prescription and the employee is authorized the use of sick leave not to exceed two (2) hours to accomplish this examination. The employee will obtain a purchase order from the Department Head prior to ordering the safety glasses. The employee will present the purchase order to the appropriate vendor when ordering. The vendor will contact the appropriate Department Head when the glasses are ready for delivery. The Department Head will then notify the employee who will present himself at the vendor for fitting and pickup. Section 5. In the event a probationary employee has been issued safety glasses and terminates his employment with the City for any reason during the probationary period, he shall be required to reimburse the City for any expenses incurred in the purchase of safety glasses.

  • Medi Cal/daily service logs and notes and other documents used to record provision of services provided by instructional assistants, behavior intervention aides, bus aides, and supervisors

  • Scratches appliance malfunctions and any resultant leak there from; (R) any stain, soiling or damage resulting from everyday use or which has built up over time, e.g. hair, body or suntan oils and/or lotions; (S) signs of soiling include darkened areas where the body comes into contact with the furniture (these darkened areas are signs of soil build-up, which is not covered); (T) general maintenance and overall cleaning of the furniture is the consumer’s responsibility; (U) damage due to harsh or corrosive chemicals; (V) acids, including without limitation, dyes and inks (except ballpoint), plant food and fertilizer and bleach, gum; (W) any non-operating part or decorative parts such as hinges, knobs, handles, or shelves; (X) coverage under another insurance program; (Y) delivery and/or redelivery and/or loss or damage to the Covered Product while in the course of transit; (Z) design deficiency; (AA) fabrics with “X” cleaning codes and non-colorfast fabrics and leathers; (AB) odors; (AC) variation of the color, or graining of wood or wood products, marble or leather; (AD) split leathers used in seat cushions, back cushions or top or inside arm areas; (AE) natural markings on leather, such as, healed scars, insect bites, brand marks or wrinkles, or suede, and leathers with embossed patterns other than those stimulating natural cowhide; (AF) non- bovine leathers, and other buffed leathers; (AG) stains, color loss or damage resulting from cleaning methods or products (detergents, abrasives or other harsh cleaning agents) other than those recommended by the furniture manufacturer; (AH) stone or sand abrasion; (AI) loss or damage resulting from: pre-existing conditions known to You; (AJ) wear related issues, such as but not limited to, fading, wear, seam separation, stress tears, loss of foam resiliency, pilling or fraying of any fabric on all types of furniture; (AK) color loss or cracking and peeling on any leather or vinyl; (AL) splits or bi-cast leather; (AM) furniture that is used for commercial, institutional, outdoor or rental purposes; (AN) Customer’s Own Material furniture; (AO) wicker, rattan, and teakwood furniture; (AP) massage chairs; (AQ) stains or damage to suede, split-grain leather hide or exotic leathers; (AR) manufacturer quality issues such as stress tears, fabric flaws, fading, color loss or change, loss of foam or resiliency, cracking and peeling of leather or vinyl, natural leather markings, and defects in design and workmanship; (AS) Stains or damage that occur during assembly, delivery, installation, before furniture is delivered to your residence, while the furniture is located outside of your residence, while the furniture is in storage or being moved to or from storage or between residences; (AT) Wear & Tear caused by repeated use such as scuffing, soiling, hair/body oil, perspiration, surface abrasions, pilling or fraying of fabric, loose joints; (AU) Stains or damage covered under any manufacturer warranty, recall, homeowner, renter or other insurance policy; (AV) Stains or damage caused by structural problems, appliance malfunctions, Acts of God or natural disasters, theft, vandalism or illegal activity (AW) Stains or damage caused by independent contractors

  • Prescription Glasses This plan covers prescription glasses as follows: • Frames - one (1) collection frame per plan year; • Lenses - one (1) pair of glass or plastic collection lenses per plan year. This includes single vision, bifocal, trifocal, lenticular, and standard progressive lenses. This plan covers the following lens treatments: • UV treatment; • tint (fashion, gradient, and glass-grey); • standard plastic scratch coating; • standard polycarbonate; and • photocromatic/transitions plastic. This plan covers one (1) supply of contact lenses as follows: • conventional contact lenses - one (1) pair per plan year from a selection of • extended wear disposable lenses - up to a 6-month supply of monthly or two- week single vision spherical or toric disposable contact lenses per plan year; or • daily wear disposable lenses - up to a 3-month supply of daily single vision spherical disposable contact lenses per plan year. This plan also covers the evaluation, fitting, or follow-up care related to contact lenses. This plan covers additional contact lenses if your prescribing network provider submits a verification form, with the regular claim form, verifying that you have one of the following conditions: • anisometropia of 3D in meridian powers; • high ametropia exceeding -10D or +10D in meridian powers; • keratoconus when the member’s vision is not correctable to 20/25 in either or both eyes using standard spectacle lenses; and • vision improvement for members whose vision can be corrected two lines of improvement on the visual acuity chart when compared to the best corrected standard spectacle lenses.

  • Check Meters Developer, at its option and expense, may install and operate, on its premises and on its side of the Point of Interconnection, one or more check meters to check Connecting Transmission Owner’s meters. Such check meters shall be for check purposes only and shall not be used for the measurement of power flows for purposes of this Agreement, except as provided in Article 7.4 below. The check meters shall be subject at all reasonable times to inspection and examination by Connecting Transmission Owner or its designee. The installation, operation and maintenance thereof shall be performed entirely by Developer in accordance with Good Utility Practice.

  • Celsius 43 cents per hour extra; in excess of 54 Celsius 58 cents per hour extra. Where work continues for more than two hours in temperatures exceeding 54 Celsius, employees shall be entitled to 20 minutes rest after every two hours work without deduction of pay. The temperature shall be determined by the supervisor after consultation with the employees who claim the extra rate.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!