Survey Charts and Scale of Survey Charts Sample Clauses

Survey Charts and Scale of Survey Charts. All survey charts to be produced by the Contractor shall be reduced to Chart Datum (CD), and the depths and/or heights shall be plotted in metres and centimetres. The charts are to be prepared in 1:500 scale for Pre / Post dredging surveys and 1:5000 scale for River disposal surveys and presented to the Engineer in 120 gsm good quality paper (5 copies) and also in soft copy form in CD / DVD (2 sets). Furthermore, the charts shall incorporate all reference points, buoys, beacons, markers, gauges and benchmarks, together with the location and nature of obstructions, structures and facilities. Particular items of interest shall also be indicated on the Charts. The survey is required to be referred to WGS-84 datum and the fair sheet is to be plotted on Universal transverse Mercator projection (UTM). Contours are to be indicated on the chart. All prominent shore features and other conspicuous objects are to be fixed and indicated on the chart.
AutoNDA by SimpleDocs
Survey Charts and Scale of Survey Charts. The survey charts to be produced by the Contractor shall be reduced to a water level as directed by the EIC. Some charts may also have to be prepared without any reduction. Decision of EIC in this regards shall be final. The depths and/or heights shall be plotted in metres and centimetres. The charts are to be prepared in 1:500 scale for Pre / Post dredging surveys and 1:5000 scale for River disposal surveys and presented to the Engineer in 120 gsm good quality paper (5 copies) and also in soft copy form in CD / DVD (2 sets). Furthermore, the charts shall incorporate all reference points, buoys, beacons, markers, gauges and benchmarks, together with the location and nature of obstructions, structures and facilities. Particular items of interest shall also be indicated on the Charts. The survey is required to be referred to WGS-84 datum and the fair sheet is to be plotted on Universal Transverse Mercator projection (UTM). Contours are to be indicated on the chart. All prominent shore features and other conspicuous objects are to be fixed and indicated on the chart.
Survey Charts and Scale of Survey Charts. The survey charts to be produced by the Contractor shall be reduced to a water level as directed by the EIC. Some charts may also have to be prepared without any reduction. Decision of EIC in this regards shall be final. The charts are to be prepared in 1:500 scale for Pre / Post dredging surveys and 1:5000 scale for River disposal surveys and presented to the Engineer in 120 gsm good quality paper (5 copies) and also in soft copy form in CD / DVD (2 sets). Furthermore, the charts shall incorporate all reference points, buoys, beacons, markers, gauges and benchmarks, together with the location and nature of obstructions, structures and facilities. Particular items of interest shall also be indicated on the Charts. The survey is required to be referred to WGS-84 datum and the fair sheet is to be plotted on Universal transverse Mercator projection (UTM). Contours are to be indicated on the chart. All prominent shore features and other conspicuous objects are to be fixed and indicated on the chart.

Related to Survey Charts and Scale of Survey Charts

  • Escrow Format Specification 3.1. Deposit’s Format. Registry objects, such as domains, contacts, name servers, registrars, etc. will be compiled into a file constructed as described in draft-xxxxx-xxxxxxx-registry-data-escrow, see Part A, Section 9, reference 1 of this Specification and draft-xxxxx-xxxxxxx-dnrd-objects-mapping, see Part A, Section 9, reference 2 of this Specification (collectively, the “DNDE Specification”). The DNDE Specification describes some elements as optional; Registry Operator will include those elements in the Deposits if they are available. If not already an RFC, Registry Operator will use the most recent draft version of the DNDE Specification available at the Effective Date. Registry Operator may at its election use newer versions of the DNDE Specification after the Effective Date. Once the DNDE Specification is published as an RFC, Registry Operator will implement that version of the DNDE Specification, no later than one hundred eighty (180) calendar days after. UTF-8 character encoding will be used.

  • Construction Schedules 10.1 Within seven (7) days of the University’s issuance of a purchase order, the Contractor shall submit to the Project Coordinator three (3) copies of a Construction Schedule for this Project. The Schedule shall be in bar chart form and shall include all aspects of the work, the interrelationship of the various trades and the critical path of the job. The schedule shall include a timeline for the submission, review and approval of shop drawings for critical path items and delivery and installation dates for those same critical path, or long lead time items, (such as electrical transformers and elevator). The Schedule shall coincide with the Contractor’s approved Schedule of Values. The Schedule shall indicate a completion date in advance of the date established for Substantial Completion. The Schedule shall be acceptable to the Architect/Engineer and the Project Coordinator. It shall be revised and reissued at the beginning of every month for the duration of the project. This monthly update progress Schedule shall include a summary comparison of the original schedule and the latest updated schedule (previous month) showing all activity description and dates. These comparison schedules shall be in the form of a summary bar chart, an activity listing report and actual to target comparisons. The reports may include critical activities, float time, duration of each activity, dates of each activity and the network logic (including successors and predecessors of each activity). Included with the written report and electronic copy of the schedule submission noting the above referenced requirements. Failure to provide the Architect/Engineer, or the Project Coordinator with an acceptable, revised Schedule, within seven (7) days of the receipt of a written request, may result in the withholding of the Contractor’s monthly progress payments until such a Schedule is received.

  • Construction Schedule The progress schedule of construction of the Project as provided by Developer and approved by District.

  • NOTICE TO PROCEED AND SCHEDULE The CONSULTANT shall begin the work to be performed under this Contract only upon receipt of the written notice to proceed from the LPA, and shall deliver the work to the LPA in accordance with the schedule contained in Appendix "C" which is herein attached to and made an integral part of this Contract.

  • CONTRACT EXHIBIT I PREFERRED PRICING AFFIDAVIT This preferred-pricing affidavit is entered into in accordance with section 216.0113, F.S., and as required by Contract No. 80101507-21-STC-ITSA (“Contract”) between (“Contractor”) and the Department of Management Services. As the person authorized by Contractor to sign this affidavit, I attest that the Contractor is in full compliance with the preferred-pricing clause of the Contract. Contractor’s Name: By: Signature Printed Name/Title Date: STATE OF COUNTY OF Sworn to (or affirmed) and subscribed before me this day of , by . Signature of Notary Vendor Name: FEIN# Vendor’s Authorized Representative Name and Title: Address: City, State, and Zip code: Phone Number: ( ) - E-mail: CORPORATE SEAL (IF APPLICABLE) (Print, Type, or Stamp Commissioned Name of Notary Public) [Check One] Personally Known OR Produced the following I.D.

  • Drug-Free Workplace Certification As required by Executive Order No. 90-5 dated April 12, 1990, issued by the Governor of Indiana, the Contractor hereby covenants and agrees to make a good faith effort to provide and maintain a drug-free workplace. The Contractor will give written notice to the State within ten (10) days after receiving actual notice that the Contractor, or an employee of the Contractor in the State of Indiana, has been convicted of a criminal drug violation occurring in the workplace. False certification or violation of this certification may result in sanctions including, but not limited to, suspension of contract payments, termination of this Contract and/or debarment of contracting opportunities with the State for up to three (3) years. In addition to the provisions of the above paragraph, if the total amount set forth in this Contract is in excess of $25,000.00, the Contractor certifies and agrees that it will provide a drug-free workplace by:

  • Construction and Scope of Agreement The language of all parts of this Agreement shall in all cases be construed as a whole, according to its fair meaning, and not strictly for or against any party. This Agreement is the only, sole, entire, and complete agreement of the parties relating in any way to the subject matter hereof. No statements, promises, or representations have been made by any party to any other, or relied upon, and no consideration has been offered or promised, other than as may be expressly provided herein. This Assumption of Risk, Release of Claims, Indemnification, and Hold Harmless and Agreement supersedes any earlier written or oral understandings or agreements between the parties. Participant acknowledges that he/she has read this Assumption of Risk, Release of Claims, Indemnification and Hold Harmless Agreement, understands its meaning and effect, and agrees to be bound by it. Date:

  • ADDITIONAL SPECIAL CONTRACT CONDITIONS A. Special Contract Conditions revisions: the corresponding subsections of the Special Contract Conditions referenced below are replaced in their entirety with the following:

  • Implementation Schedule TIME IS OF THE ESSENCE with regard to all dates and time periods set forth and/or incorporated herein. Any material modification or deviation from an approved schedule described in this Agreement shall occur only upon approval of the City and RDA, with any such approvals required to be in writing as an amendment to this Agreement, and which approvals shall not be unreasonably withheld. City shall cooperate and act promptly with respect to any and all permits or approvals necessary for completion of the Project. Notwithstanding the above, this Agreement shall not limit the discretion of the City, or any of its duly appointed and authorized governing bodies, boards or entities, in approving or rejecting any aspect of the Project or improvements contemplated on or about the Property.

  • Second Schedule Second Schedule THIS AGREEMENT under seal made the twenty-seventh day of October One thousand nine hundred and sixty-four BETWEEN THE HONOURABLE XXXXX XXXXX, M.L.A. Premier and Treasurer of the State of Western Australia acting for and on behalf of the said State and instrumentalities thereof from time to time (hereinafter called “the State”) of the one part and HAMERSLEY IRON PTY. LIMITED a company incorporated under the Companies Xxx 0000 of the State of Victoria and having its registered office and principal place of business in that State at 00 Xxxxxxx Xxxxxx Melbourne and its registered office in the State of Western Australia at 37 Saint George’s Terrace Perth (hereinafter called “the Company” which expression will include the successors and assigns of the Company including where the context so admits the assignees and appointees of the Company under clause 20 of the agreement hereinafter referred to) of the other part.

Time is Money Join Law Insider Premium to draft better contracts faster.