TOOLS, EQUIPMENT, ETC Sample Clauses

TOOLS, EQUIPMENT, ETC. 18.01 It shall be the responsibility of each employee to provide and maintain in good condition the following list of tools: Journeymen 0xx & 0xx Xx. 0xx Xx. 0xx Xx. (1) Knife X X X (1) Pointer Trowel, 5" or 6" X X X (1) Square Trowel, 4½" X 11" X X (1) Pruning Saw X X X (1) Keyhole Saw X X (1) 8 ft. Tape X X X (1) 8" Scissors X X X (1) 12" Tinsnips X X (2) Metalmasters (M1, M2) X (1) Pair of 7" or 8" Nippers X X X (1) Chicken Wire Hook X (1) 4" Paste Brush X Springs or Rubber Bands X X X (1) Xxxxxx X X (1) Scratch Awl X (1) Set of Dividers X (1) Screwdriver Set X (1) Leather or Canvas Tool Pouch or CarryallX X X (1) Canvas Apron X X X (1) Tool Box X X X Where employees are required to work with stainless steel cladding and they ruin their metal cutting tools on this material, those tools will be replaced or paid for forthwith (at retail cost). 18.02 The Employer shall supply rubber or polythene gloves, hand cleaners and brushes when the employees are working with foamglass and all types of mastics. The Employer also agrees to supply major cutting tools. 18.03 Any employee working on spraying shall be supplied with coveralls, work gloves and rubber boots.
Sample 1Sample 2
AutoNDA by SimpleDocs
TOOLS, EQUIPMENT, ETC. 18.01 It shall be the responsibility of each employee to provide and maintain in good condition the following list of tools: (1) Knife X X X (1) Pointer Trowel, 5" or 6" X X X (1) Square Trowel, 4½" X 11" X X (1) Pruning Saw X X X (1) Keyhole Saw X X (1) 8 ft. Tape X X X (1) 8" Scissors X X X (1) 12" Tinsnips X X (2) Metalmasters (M1, M2) X (1) Pair of 7" or 8" Nippers X X X (1) Chicken Wire Hook X (1) 4" Paste Brush X Springs or Rubber Bands X X X (1) Xxxxxx X X (1) Scratch Awl X (1) Set of Dividers X (1) Screwdriver Set X (1) Leather or Canvas Tool Pouch or Carryall X X X (1) Canvas Apron X X X (1) Tool Box X X X
Sample 1
TOOLS, EQUIPMENT, ETC. 18.01 Employees are to supply tools as per the Tool List. Such tools are subject to verification by the Employer upon employment during regular working hours in the presence of the Employee. The Employee’s personal tools shall be in good condition when the Employee hires on to a job and they shall be maintained and kept in good condition for the duration of employment.
Sample 1
TOOLS, EQUIPMENT, ETC furnished by the Employer shall be the property of the Employer
Sample 1
TOOLS, EQUIPMENT, ETC. 18.01 Employees are to supply tools as per the Tool List. Such tools are subject to verification by the Employer upon employment during regular working hours in the presence of the Employee. The Employee's personal tools shall be in good condition when the Employee hires on to a job and they shall be maintained and kept in good condition for the duration of employment. 2015+20/9 /11su/ators ...Page 50 Minimum for all Workers 1 - Toolbox with Lock 2 - Insulation Knives (suitable for Cal-Sil and fiber insulations) 1 - Utility Knife 1 - Pruning Saw l - Keyhole Saw 2 - Tape Measures (min 10') 1 - Small Divider 6-8" 1 - Large Divider 1 0· 1 2" Additional for Commercial Workers I - 8" Scissors 1 - Tool Pouch or Carryall l - Circumference Tape l - Chicken Wire Hook (Xxxxxx Pin Extractor)
Sample 1

Related to TOOLS, EQUIPMENT, ETC

  • Contractor’s Equipment Payment for required equipment owned by the Construction Manager or an affiliate of the Construction Manager will be based solely on an hourly rate derived by dividing the current appropriate monthly rate by 176 hours. No payment will be made under any circumstances for repair costs, freight and transportation charges, fuel, lubricants, insurance, any other costs and expenses, or overhead and profit. Payment for such equipment made idle by delays attributable to the Government will be based on one-half the derived hourly rate under this subsection.

  • System Upgrade Facilities and System Deliverability Upgrades Connecting Transmission Owner shall design, procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Appendix A hereto. The responsibility of the Developer for costs related to System Upgrade Facilities and System Deliverability Upgrades shall be determined in accordance with the provisions of Attachment S to the NYISO OATT.

  • Computer Equipment Recycling Program If this Contract is for the purchase or lease of computer equipment, then Contractor certifies that it is in compliance with Subchapter Y, Chapter 361 of the Texas Health and Safety Code related to the Computer Equipment Recycling Program and the Texas Commission on Environmental Quality rules in 30 TAC Chapter 328.

  • System Upgrade Facilities Transmission Owner shall design, procure, construct, install, and own the System Upgrade Facilities described in Appendix A hereto. The responsibility of the Developer for costs related to System Upgrade Facilities shall be determined in accordance with the provisions of Attachment S to the NYISO OATT.

  • Equipment and Software To use the Mobile Remote Deposit Services, you must obtain and maintain at your expense, compatible equipment and software that we may specify from time to time.

  • Customer Equipment Customer represents and warrants that it owns or has the legal right and authority, and will continue to own or maintain the legal right and authority during the term of this Agreement, to place and use the Customer Equipment as contemplated by this Agreement. Customer further represents and warrants that its placement, arrangement, and use of the Customer Equipment in the Internet Data Centers complies with the Customer Equipment Manufacturer's environmental and other specifications.

  • Tenant’s Equipment Tenant shall provide notice to Landlord prior to moving any heavy machinery, heavy equipment, freight, bulky matter or fixtures (collectively, “Equipment”) into or out of the Building and shall pay to Landlord any costs actually incurred by Landlord in connection therewith. If such Equipment requires special handling, Tenant agrees (a) to employ only persons holding all necessary licenses to perform such work, (b) all work performed in connection therewith shall comply with all applicable Requirements and (c) such work shall be done only during hours designated by Landlord.

  • System Upgrades The Connecting Transmission Owner shall procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Attachment 6 of this Agreement. To the extent that design work is necessary in addition to that already accomplished in the Class Year Interconnection Facilities Study for the Interconnection Customer, the Connecting Transmission Owner shall perform or cause to be performed such work. If all the Parties agree, the Interconnection Customer may construct System Upgrade Facilities and System Deliverability Upgrades. 5.2.1 As described in Section 32.3.5.3 of the SGIP in Attachment Z of the ISO OATT, the responsibility of the Interconnection Customer for the cost of the System Upgrade Facilities and System Deliverability Upgrades described in Attachment 6 of this Agreement shall be determined in accordance with Attachment S of the ISO OATT, as required by Section 32.3.5.3.2

  • Television Equipment Recycling Program If this Contract is for the purchase or lease of covered television equipment, then Contractor certifies that it is compliance with Subchapter Z, Chapter 361 of the Texas Health and Safety Code related to the Television Equipment Recycling Program.

  • Metering Equipment 13.01. Utility will furnish, install, own and maintain metering equipment capable of measuring the flow of kilowatt-hours (kWh) of energy. The Customer's service associated with the CRG will be metered at a single metering point. The metering equipment will measure energy delivered by Utility to Customer and also measure energy delivered by Customer to Utility. Customer agrees to provide safe and reasonable access to the premises for installation of this equipment and its future maintenance or removal.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!