Traffic Safety and Control Sample Clauses

Traffic Safety and Control. This clause shall read as under: The Contractor shall take all necessary measures for the safety of traffic during construction and provide, erect and maintain such barricades, signs, delineators, markings, lights and traffic controllers as are necessary for the information and protection of all road users, including pedestrians and cyclists, passing through the section under improvement. The Contractor shall be fully responsible for the adequate safety of all site operations and methods of construction. The design and layout of all traffic management devices shall be in accordance with the roadwork’s drawings and the Traffic Control Plan, or as otherwise directed by the Engineer. All signs, barricades, and delineators shall be reflectorised. Regulatory, Warning and Informatory signs shall conform to IRC 67-2001 with sign faces made from retro-reflective sheeting of High intensity grade or Engineering grade. Barricades of mild steel with firm and sturdy supporting, delineators and any other markers shall be made retro-reflective using either sheeting or plastic corner- cube reflectors. At the points where traffic is to deviate from its normal path (whether on temporary diversion or part width of the carriageway) the route to be taken by the diverted traffic shall be clearly marked with delineators and appropriate signs. At night the route shall also be delineated with lanterns or other suitable light sources. One-way traffic operation shall be established whenever the traffic is to use part of the carriageway where there is insufficient width for two-way traffic. This shall be done with temporary traffic signals, or traffic controllers using STOP / GO signs, with flag mans round the clock as per the drawings. At night the STOP / GO signs shall be illuminated. Warning signs shall be erected on all approaches to the works site in accordance with the road works drawings and the Traffic Control Plan, or as otherwise directed by the Engineer. In any case Engineer and Contractor shall ensure that a continuous road section of length in excess of 1 km (i.e 1000 m thousand meters) shall not be permitted for taking up of earth works and an aggregate length of the section where the earth works are in progress at any given instant shall not be more than 7000 m or 7 km. At all times, the Contractor shall provide safe and convenient passage for vehicles, pedestrians and livestock to and from side roads and property accesses connecting to the roadway. Work which affects ...
AutoNDA by SimpleDocs
Traffic Safety and Control. 1.12.2 The Contractor shall where works are on or adjacent to highway land comply with the recommendations in Chapter 8 Traffic Safety Measures for Road Works of the Traffic Signs Manual published by her Majesty's Stationery Office.

Related to Traffic Safety and Control

  • HEALTH, SAFETY AND ENVIRONMENT 41.1 In the performance of this Contract, Contractor and Operator shall conduct Petroleum Operations with due regard to health, safety and the protection of the environment (“HSE”) and the conservation of natural resources, and shall in particular:

  • Health, Safety and Security 22.2.1 The University and the Association agree to promote safe, secure and healthy working conditions and procedures, and to encourage Members to adopt and follow sound health, safety and security procedures in the performance of their work.

  • ENVIRONMENT, SAFETY AND HEALTH PROTECTION (a) Seller shall perform this Agreement in a manner that ensures adequate protection for workers, the public, and the environment, and shall be accountable for actions of itself and its lower-tier subcontractors, agents and employees. Seller shall exercise a degree of care commensurate with the work and the associated hazards. Seller shall ensure that management of environment, safety and health (ES&H) functions and activities is an integral and visible part of Seller’s work planning and execution process. In the event that Xxxxxx fails to comply with this Agreement, Company may, without prejudice to any other legal or contractual rights, issue an order stopping all or any part of the work; thereafter a start order for resumption of work may be issued at Company’s discretion. Seller shall make no claim for an extension of time or for compensation or damages by reason of or in connection with such work stoppage. In addition, Company may require, in writing, that Seller remove from the work any employee the Company deems unsafe, incompetent, careless, or otherwise objectionable.

  • Pupil Safety and Fingerprinting CONTRACTOR shall comply with all provisions of the Education Code which protect the safety of any pupil that may come in contact with employees of the CONTRACTOR. Pursuant to Education Code section 45125.1, CONTRACTOR shall conduct criminal background checks of ALL employees of CONTRACTOR assigned to the PROJECT site, and shall certify that no employees who have been convicted of serious or violent felonies, as specified in Education Code Section 45125.1, will have contact with pupils, by utilizing the General Certification Regarding Background Checks Form. As part of such certification, CONTRACTOR must provide the District with a list of all employees providing services pursuant to this Agreement, and designate which sites such employees will be assigned. In performing the services set forth in this Agreement, CONTRACTOR shall not utilize any employees who are not included on the above-referenced list. At District’s sole discretion, District may make a finding, as authorized under Education Code section 45125.1, that CONTRACTOR’s employees will have only “limited contact” with pupils. In accordance with Education Code Section 45125.2, a CONTRACTOR performing construction, reconstruction, rehabilitation or repair services to a school facility shall not be required to perform Section 45125.1 background checks of all employees assigned to the PROJECT site if such CONTRACTOR installs a physical barrier at the worksite to limit employee contact with pupils and/or provides continual supervision and monitoring of all employees of the CONTRACTOR by an employee of the CONTRACTOR whom the Department of Justice has ascertained has not been convicted of a violent or serious felony. Such CONTRACTOR shall certify to the District its compliance with one of the aforementioned alternatives under Education Code Section 45125.2 pertaining to pupil safety with the form entitled CONSTRUCTION CONTRACTOR CERTIFICATION REGARDING BACKGROUND CHECKS which is on file at the Administrative Office of the DISTRICT. Contractor’s failure to comply with the law or Article VI, Paragraph 4 of this Agreement shall be considered a material breach of this Agreement upon where this Agreement may be terminated, at District’s sole discretion, without any further compensation to Contractor.

  • Health and Safety Standards Contractor shall abide by all health and safety standards set forth by the State of California and/or the County of Xxxxxx pursuant to the Injury and Illness Prevention Program. If applicable, Contractor must receive all health and safety information and training from County.

  • HEALTH AND SAFETY AT WORK The Supplier shall undertake its obligations arising hereunder and in all Contracts in accordance with the OHSAS 18001 Occupational Health and Safety Management System or equivalent. Both parties shall take all necessary measures to ensure the health and safety of the other party’s employees and agents visiting their premises. The Supplier shall notify the Authority of any use of substances listed under COSHH regulations or the Montreal Protocol in the provision of the Services.

  • Safety and Compliance The Company commits to make all management and employees aware of all the changes to the Occupational Health and Safety Act and Regulations. This should be done via training courses and or union seminars. The conducting of the training and or seminars shall be at times convenient to the company.

  • COMPLIANCE WITH HEALTH, SAFETY, AND ENVIRONMENTAL REGULATIONS The Contractor, it’s Subcontractors, and their respective employees, shall comply fully with all applicable federal, state, and local health, safety, and environmental laws, ordinances, rules and regulations in the performance of the services, including but not limited to those promulgated by the City and by the Occupational Safety and Health Administration (OSHA). In case of conflict, the most stringent safety requirement shall govern. The Contractor shall indemnify and hold the City harmless from and against all claims, demands, suits, actions, judgments, fines, penalties and liability of every kind arising from the breach of the Contractor’s obligations under this paragraph.

  • Health and Safety Training Regular employees and auxiliary employees in posted positions shall participate in a Health and Safety Training session once in a calendar year. The training program offered by the Employer must be approved by the joint Health and Safety Committee prior to such training commencing. Training will be provided during normal work hours and employees shall suffer no loss of pay or benefits.

  • ATM Safety It is important to be aware of your surroundings when using an ATM, especially at night. When you are using an ATM, you should secure any cash you withdraw before leaving the ATM. If you need to use an ATM at night, consider taking someone you know with you, and only use an ATM that is well-lit and unobstructed from view. If anything appears to be suspicious, do not use the ATM. Always call 911 in the event of an emergency or to report any suspicious activity. If you have any questions or comments about the safety of any of our ATMs, please call us on Oahu at (000) 000-0000 or 0-000-000-0000 from the neighbor islands, Guam, the CNMI or Continental U.S.

Time is Money Join Law Insider Premium to draft better contracts faster.