WAMPO. WAMPO shall provide a written decision on the Change Request to the Contractor within a maximum of ten (10) business days of receipt of the Change Request.
WAMPO Sample Clauses
Related to WAMPO
Prosthodontics We Cover prosthodontic services as follows: • Removable complete or partial dentures, for Members 15 years of age and above, including six (6) months follow-up care; • Additional services including insertion of identification slips, repairs, relines and rebases and treatment of cleft palate; and • Interim prosthesis for Members five (5) to 15 years of age. We do not Cover implants or implant related services. Fixed bridges are not Covered unless they are required: • For replacement of a single upper anterior (central/lateral incisor or cuspid) in a patient with an otherwise full complement of natural, functional and/or restored teeth; • For cleft palate stabilization; or • Due to the presence of any neurologic or physiologic condition that would preclude the placement of a removable prosthesis, as demonstrated by medical documentation.
Modern Slavery You hereby affirm your compliance with the Modern Slavery Xxx 0000 and associated guidance. You confirm (a) that you have read, are familiar with and shall not perform an act or omission which is in contravention with, the letter or spirit of the Act; and (b) you carry out regular, meaningful and comprehensive due diligence procedures and have internal policies in place to address any suspected human rights abuse in your business and Group where applicable.
Millwright Xxxxx be to assist and work under the direction and instructions I or A. He will work alone at times performing assignments in keeping with his training. During the course of his year, training must become proficient in good practices in the areas of fitting, aligning, lubricating and the operation of all shop tools and machines. In addition to the foregoing, he will be exposed to and the process of learning techniques required in trouble shooting key production machinery, pipe fitting, basic welding and machining but not be expected to display a high degree of proficiency in these areas at this point. Millwright Must be capable of performing the tasks of fittings, aligning, lubricating an able to operate all shop tools and machines. Must under direction become proficient in basic welding and pipe fitting as well as dismantling and reassembly of plant equipment. Under direction,will continueto develop skills in trouble shooting all plant equipment and improve his skills at machining part and be exposed to basic principles of hydraulics and pneumatic. He may work alone frequently, but occasionally will require direction and instructions form Millwright I or A. Millwright 11: be capable, without direction of fitting, aligning and lubrication and taking apart and reassembling plant equipment. In addition, is expected to be able to weld, operate shop tools and do pipe fitting as required. Must under direction, become proficient at effective methods of trouble shooting and repairing hydraulic, pneumatic and mechanical faults in plant machinery. I: Must be capable without direction of performing all practices under Xxxxxxxxxx Must under directionbecomeproficient at reading and understanding blueprints, all phases of installing new equipment, laying out hydraulic and mechanical drives and meet speed and power requirements correctly. Xxxxxxxxxx "A": Must he capable without direction, of performing all under Xxxxxxxxxx X, and Must take full responsibility for work done by himself or his assistant. Must he in possession of a Millwright Certificate or a Machinist Certificate or Welder Certificate. Millwrightspresently employed in this classification will not be required to have a Certificate.
Orthodontics We Cover orthodontics used to help restore oral structures to health and function and to treat serious medical conditions such as: cleft palate and cleft lip; maxillary/mandibular micrognathia (underdeveloped upper or lower jaw); extreme mandibular prognathism; severe asymmetry (craniofacial anomalies); ankylosis of the temporomandibular joint; and other significant skeletal dysplasias. Procedures include but are not limited to: • Rapid Palatal Expansion (RPE); • Placement of component parts (e.g. brackets, bands); • Interceptive orthodontic treatment; • Comprehensive orthodontic treatment (during which orthodontic appliances are placed for active treatment and periodically adjusted); • Removable appliance therapy; and • Orthodontic retention (removal of appliances, construction and placement of retainers).
Playground ~ The playground is primarily for the use of children under the age of twelve (12). Any child caught throwing rocks, vandalizing, or hitting or teasing other children will be asked to leave the playground. An adult or appropriate baby-sitter must accompany all children under the age of six (6) years old. Garbage ~ The storage, collection and disposal of refuse and garbage in the recreational camping areas shall be conducted as to create no health hazards, rodent harborage, insect breeding areas, accident or fire hazards, or air pollution. Bag all food garbage in plastic and tie shut before placing in the dumpster, to prevent odor and rodents which are drawn to the garbage area, such as skunks, raccoons etc. Dumpster is for normal daily household garbage, no large boxes, building supplies, carpets etc. Camper is to dispose of this type of garbage elsewhere. Garbage may be placed in dumpsters only. If a dumpster is full, do not place garbage on or around the dumpster, find an empty dumpster to place your garbage into. Bags of garbage may not be set outside your camper for any reason. Disposal or deposit of hazardous or toxic waste is prohibited. No gas, oil, batteries, or car fluids may be deposited into the dumpsters or around the dumpsters. Hazardous materials will not be disposed of by the garbage service. Disposal or deposit of furniture, barbeque grills, washer, dryers, and other large household items are NOT permitted on, in or around the dumpsters. Holding Tanks ~ There is no size restriction on holding tanks, however, they must be opaque XX xxxx/black water approved tanks. The on-site dump station may be used to empty tanks that hold 50 gallons or less. For tanks over 50 gallons Camper must contract with a pumping service to pump and remove tank contents from campground. No dumping of xxxx water onto the ground. Docks ~ Campground does NOT have a lifeguard on duty. The docks are privately owned. In order to be on someone's dock you must receive permission from the dock owner. An adult must accompany all children on the docks after dark. Life jackets are required for young children fishing off docks. Running, diving, and/or horseplay are not allowed on the docks. All debris and toys must be removed from the docks, beach and marina area. Inappropriate behavior, intoxication or shouting on docks is not allowed. Glass is not allowed on the beach area. Jet skies, wave runners, etc. are not permitted in the marina area. Tires cannot be left in the marina area under boats or tied onto docks. Fish House ~ Clean up fish cleaning facility when done with your fish cleaning and bag all fish remains. Fish cleaning house must be kept clean and all fish waste must be put into plastic bags and deposited into dumpster and cover on dumpster closed. No dumping of fish wastes into marina or dog waste stations! Swimming Pool ~ Campers are required to abide by all rules posted in and around the pool area.
meminta nasihat daripada Pihak Xxxxxx dalam semua perkara berkenaan dengan jualan lelongan, termasuk Syarat-syarat Jualan (iii) membuat carian Hakmilik Xxxxx xxxxxx rasmi di Pejabat Tanah xxx/atau xxxx-xxxx Pihak-pihak Berkuasa yang berkenaan xxx (iv) membuat pertanyaan dengan Pihak Berkuasa yang berkenaan samada jualan ini terbuka kepada semua bangsa atau kaum Bumiputra Warganegara Malaysia sahaja atau melayu sahaja xxx juga mengenai persetujuan untuk jualan ini sebelum jualan lelong.Penawar yang berjaya (“Pembeli”) dikehendaki dengan segera memohon xxx mendapatkan kebenaran pindahmilik (jika ada) daripada Pihak Pemaju xxx/atau Pihak Tuanpunya xxx/atau Pihak Berkuasa Negeri atau badan-badan berkenaan (v) memeriksa xxx memastikan samada jualan ini dikenakan cukai. BUTIR-BUTIR HARTANAH : HAKMILIK : Hakmilik strata bagi hartanah ini masih belum dikeluarkan oleh pihak berkuasa. NO. HAKMILIK INDUK / NO. LOT : Geran 203771, Lot 106 Seksyen 3 PEKAN/DAERAH/NEGERI : Pekan Batu Tiga / Petaling / Selangor Darul Ehsan PEGANGAN : Selama-lamanya KELUASAN LANTAI : 93.65 meter persegi (1,008 kaki persegi) PEMAJU : Shanghai Realty (M) Sdn Bhd (350799-U) XXXXXXXX XXX : Xxxxxxxx Xxxxx Bin Xxxxxx BEBANAN : Diserahhak kepada RHB Islamic Bank Berhad (200501003283/680329-V) LOKASI XXX PERIHAL HARTANAH Hartanah tersebut terletak di Pangsapuri Indahria, Xx. 0, Xxxxx Xxxx Xxxx-Xxxxxx Xxxxx, Xxxxx Xxxxxxx, Xxxxxxx 00, 00000 Xxxx Xxxx, Xxxxxxxx Xxxxx Xxxxx. Hartanah tersebut adalah sebuah unit pangsapuri dikenali sebagai Xxxxx Pemaju No. P5-2-11, Tingkat No. 2, Bangunan No. P5, berserta dengan Xxxxx Aksesori No. GRD-07, Pangsapuri Indahria xxx mempunyai alamat surat-menyurat di Unit No. P5-02-11, Pangsapuri Indahria, Xx. 0, Xxxxx Xxxx Xxxx-Xxxxxx Xxxxx, Xxxxx Xxxxxxx, Xxxxxxx 00, 00000 Xxxx Xxxx, Xxxxxxxx Xxxxx Xxxxx. HARGA RIZAB: Harta ini dijual “keadaan seperti mana sediada” dengan harga rizab sebanyak RM 270,000.00 (RINGGIT MALAYSIA: DUA RATUS XXX TUJUH PULUH RIBU SAHAJA) xxx tertakluk kepada syarat-syarat Jualan xxx melalui penyerahan hakkan dari Pemegang Serahak, tertakluk kepada kelulusan di perolehi oleh pihak Pembeli daripada pihak berkuasa, jika ada, termasuk semua terma, syarat xxx perjanjian yang dikenakan xxx mungkin dikenakan oleh Pihak Berkuasa yang berkenaan. Pembeli bertanggungjawab sepenuhnya untuk memperolehi xxx mematuhi syarat- syarat berkenaan daripada Pihak Berkuasa yang berkenaan, jika ada xxx semua xxx xxx perbelanjaan ditanggung xxx dibayar oleh Xxxxx Xxxxxxx.Pembeli atas talian (online) juga tertakluk kepada terma-terma xxx syarat-syarat terkandung dalam xxx.xxxxxxxxxxxxxxxx.xxx Pembeli yang berminat adalah dikehendaki mendeposit kepada Pelelong 10% daripada harga rizab dalam bentuk Bank Draf atau Cashier’s Order di atas nama RHB Islamic Bank Berhad sebelum lelongan awam xxx xxxx xxxx xxxxxx bersama-sama dengan segala cukai jualan xxx perkhidmatan (SST) xxx/atau cukai yang menggantikan SST hendaklah dibayar dalam tempoh sembilan puluh (90) hari dari tarikh lelongan kepada RHB Islamic Bank Berhad melalui XXXXXX. Butir-butir pembayaran melalui XXXXXX, xxxx berhubung dengan Tetuan T. Rajagopalu & Co. Untuk maklumat lanjut, xxxx berhubung dengan TETUAN T. RAJAGOPALU & CO, Solicitors for Assignee herein whose address is at Xxxxx 0-0, Xxxxxxxx Xxxx Xxxxxx Xxxxx Xxxxx, 00000 Xxxxxxxx Xxxxxx Xxxxxxxx. Tel: 00-0000000 / Fax: 00-0000000 [Ruj: RG/RHB/0339/2023/SYAFIQAH(yusof)], peguamcara bagi pihak pemegang xxxxx xxx atau pelelong yang tersebut dibawah. RAJAN AUCTIONEERS SDN. BHD. X. XXXXX Xx.00X,Xxxxxxx Xxxx,Xxxxx Xxxx Xxxxxx, ( Xxxxxxxx Berlesen ) 41000 Klang, Selangor Darul Ehsan. H/P: 000-0000000 Tel: 00-00000000 / Fax : 00-00000000 H/P: 012-2738109 Ruj Kami: RA/RHBI/TRC/NS/4220-24(fz) CONDITIONS OF SALE
MSEA SEIU shall have exclusive rights to payroll deduction of membership dues, service fees, and premiums for current MSEA-SEIU spon- sored insurance programs. Deductions for other programs may be mutually agreed to by the parties.
Welder (a) The Welder shall when issued a specific job assume the role of a Welder and representative of the Employer and take the initiative to perform the work, according to the best practice of this industry. Where circumstances are beyond his or her control he or she shall immediately advise the Employer.
Metode Penelitian Penelitian ini bersifat deskriptif. Jenis penelitian yang digunakan adalah hukum normatif. Sumber data yang dipergunakan pada penelitian ini adalah data sekunder yang terdiri dari :
TOOL STORAGE 1. A company shall provide on all construction jobs in towns and cities, and elsewhere where reasonably necessary and practicable (or if requested buy the employee), a suitable and secure waterproof lock-up solely for the purpose of storing employees’ tools, and on multi-storey and major projects the company shall provide, where possible, a suitable lock-up for employees’ tools within a reasonable distance of the work area of large groups of employees.
