Warning Label Sample Clauses

Warning Label. Member will install a permanent warning label in a conspicuous place in close proximity to the electric meter or on the meter base to notify Cooperative personnel that there is a generator installed on the load side of the meter. The warning label shall not be placed in a location that would interfere with the ability of Cooperative personnel to read the electric meter. Member shall also place a warning label on the Isolation Device. Cooperative will provide the warning labels to Member. The warning labels must be in place before the Generator can be interconnected with Cooperative’s system.
Sample 1Sample 2Sample 3See All (22)
Warning Label. Customer will install a permanent warning label in a conspicuous place in close proximity to the electric meter or on the meter base to notify Town personnel that there is a generator installed on the load side of the meter. The warning label shall not be placed in a location that would interfere with the ability of Town personnel to read the electric meter. Customer shall also place a warning label on the Isolation Device. Town will provide the warning labels to Customer. The warning labels must be in place before the Generator can be interconnected with Town’s system.
Sample 1See All (4)
Warning Label. Customer will install a permanent warning label in a conspicuous place in close proximity to the electric meter or on the meter base to notify JOEMC personnel that there is a DR installed on the load side of the meter. The warning label shall not be placed in a location that would interfere with the ability of JOEMC personnel to read the electric meter. Customer shall also place a warning label on the Isolation Device. The warning labels must be in place before the DR can be interconnected with JOEMC’s system.
Sample 1Sample 2
Warning Label. Interconnection Customer will install a permanent warning label in a conspicuous place in close proximity to the electric meter or on the meter base to notify Cooperative personnel that there is a generator installed on the load side of the meter. The warning label shall not be placed in a location that would interfere with the ability of Cooperative personnel to read the electric meter. Interconnection Customer shall also place a warning label on the Isolation Device. Cooperative will provide the warning labels to Interconnection Customer. The warning labels must be in place before the Generator can be interconnected with Cooperative's System.
Sample 1
Warning Label. The overall dimensions of the label shall be at least 120 x 60 mm or the equivalent area. The label may be adapted in such a way that the layout differs from the example shown here; however, the content shall meet the precise prescriptions. Furthermore, no other type of information shall be included on the label unless it is placed outside a clearly marked rectangle with at least the overall dimensions as required above. In derogation to the aforementioned, a part number, bar code or similar identification mark not exceeding 8 mm x 35 mm or the equivalent area may be placed on the label. It shall also be ensured that no deviations in the shape and orientation of the provided pictograms are permitted, notably that any customised appearance of the prescribed pictogram images shall be prohibited, with the exception of the hand with pointing index finger and the open face booklet with letter 'i' on its right page provided that they are clearly recognisable as such. Small irregularities concerning line thickness, label imprinting and other relevant production tolerances shall be accepted. Figure 2 Pictogram according to ISO 2575:2004 - Z.01 that shall be used and that shall have an outer diameter of at least 38 mm Figure 3 Pictogram depicting airbag deployment danger that shall be used and that shall measure 40 mm in width and 28 mm in height or proportionally larger Paragraph 8.1.9., renumber as 8.1.8.3. and amend to read:
Sample 1
Warning Label. The customer shall install a warning label on the service meter enclosure and transformer cabinet/disconnect stating the following:
Sample 1
Warning Label. A warning label will be provided to caution subscribers/users of the service regarding its limitations and Subscriber shall keep the label on and/or near the equipment used in conjunction with the VoIP service.
Sample 1
Warning Label. The overall dimensions of the label shall be at least 120 x 60 mm or the equivalent area. The label may be adapted in such a way that the layout differs from the example shown here; however, the content shall meet the precise prescriptions. Furthermore, no other type of information shall be included on the label unless it is placed outside a clearly marked rectangle with at least the overall dimensions as required above. In derogation to the aforementioned, a part number, bar code or similar identification mark not exceeding 8 mm x 35 mm or the equivalent area may be placed on the label. It shall also be ensured that no deviations in the shape and orientation of the provided pictograms are permitted, notably that any customised appearance of the prescribed pictogram images shall be prohibited, with the exception of the hand with pointing index finger and the open face booklet with letter 'i' on its right page provided that they are clearly recognisable as such. Small irregularities concerning line thickness, label imprinting and other relevant production tolerances shall be accepted. Figure 2 Figure 3 Paragraph 8.1.9., renumber as 8.1.8.3. and amend to read:
Sample 1
Warning Label 
Sample 1

Related to Warning Label

  • Warning The “Warning” shall consist of the statement: WARNING: This product can expose you to chemicals including di(2- ethylhexyl) phthalate (DEHP), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to xxx.X00Xxxxxxxx.xx.xxx.

  • AUDIT OF LICENSED PRODUCT USAGE Contractor shall have the right to periodically audit, no more than annually, at Contractor’s expense, use of licensed Product at any site where a copy of the Product resides provided that: (i) Contractor gives Licensee(s) at least thirty (30) days advance written notice, (ii) such audit is conducted during such party’s normal business hours, (iii) the audit is conducted by an independent auditor chosen on mutual agreement of the parties. Contractor shall recommend a minimum of three (3) auditing/accounting firms from which the Licensee will select one (1). In no case shall the Business Software Alliance (BSA), Software Publishers Association (SPA), Software and Industry Information Association (SIIA) or Federation Against Software Theft (FAST) be used directly or indirectly to conduct audits, or be recommended by Contractor; (iv) Contractor and Licensee are each entitled to designate a representative who shall be entitled to participate, and who shall mutually agree on audit format, and simultaneously review all information obtained by the audit. Such representatives also shall be entitled to copies of all reports, data or information obtained from the audit; and (v) if the audit shows that such party is not in compliance, Licensee shall be required to purchase additional licenses or capacities necessary to bring it into compliance and shall pay for the unlicensed capacity at the NYS Net Price in effect at time of audit, or if none, then at the Contractor’s U.S. Commercial list price. Once such additional licenses or capacities are purchased, Licensee shall be deemed to have been in compliance retroactively, and Licensee shall have no further liability of any kind for the unauthorized use of the software.

  • Product Recalls (a) If either Party reasonably decides or is required by any government authority or court of competent jurisdiction, to initiate a product recall, withdrawal or field correction with respect to, or if there is any governmental seizure of, the Product, the Party initiating or required to initiate such action will notify the other Party promptly of the details regarding such action, including providing copies of all relevant documentation concerning such action. The Parties will assist each other in investigating any such situation and all regulatory contacts that are made and all activities concerning seizure, recall, withdrawal or field correction will be jointly coordinated by HSL and LMI. (b) If any such recall, withdrawal, field correction or seizure occurs due solely to (i) failure of any Product produced by HSL hereunder to conform to Specifications (including, without limitation, being adulterated or misbranded) or any warranty or other requirement set forth in this Agreement, (ii) the failure of HSL to comply in all material respects with any applicable law, rule, regulation, guideline, standard, court order or decree or (iii) the negligent or intentional wrongful act or omission of HSL in connection with the production of Product hereunder, then HSL shall bear the **** of any such seizure, recall, withdrawal or field correction and shall reimburse LMI for its ****, including any purchase price payments made to HSL and related taxes to the extent related to such recalled Product. To the extent any such recall, withdrawal, field correction or seizure occurs for any reason other than that set forth in the immediately preceding sentence, then LMI shall bear the **** of any such seizure, recall, withdrawal or field correction. If both HSL and LMI contribute to the cause of a seizure, recall, withdrawal or field correction, the cost and expense thereof will be shared in proportion to each Party’s contribution to the problem. For the purposes of this Agreement, the expenses of any recall, withdrawal, field correction or seizure shall include, without limitation, the out-of-pocket expenses of notification and destruction or return of the recalled Product and all other out-of-pocket costs incurred in connection with such recall but shall not include a Party’s lost profits. HSL’s reimbursement for the costs of LMI Materials related to such recall, withdrawal or field correction is limited by Section 5.6(c).