Examples of Activation time in a sentence
Hence, it is proposed to retain this requirement under the RfG by setting Maximum Admissible Choice of Full Activation time to 5 seconds.
This result can be explained by the fact that the activation of the HoloBar simply consists in raising the arm while, in contrast, activating the HoloLens and Hybrid menus requires an explicit gesture in addition to the arm movement.Figure 10: Activation time per menu (ms), with 95% CIs.
The reason for such spikes are related to the implementation of mean values in the model, not only for the attributes in [W], but also for the Activation time, which plays a crucial role when the set-point is changed in a discretized way between the extreme set-points of the tested/modelled charger.Ultimately, Figure 13b reports statistical results for the entire test pattern relying on the Matlab Statistical toolbox.
Activation time, minimum duration, maximum duration and resting time is based on national rules.
Activation time The time between when an Aircraft is assigned by the National Air Desk until that Aircraft is airborne.
Every command changes the current sanitization status.o Can work also in stand-by mode.o Can work with fixed or pre-programmed intervals.o Activation time defined by par.
The options are presented in Table 3.1. Activation frequency (Hz) Activation time (sec) ≤ 49.70 ≤ 1.30 ≤ 49.60 ≤ 1.00 ≤ 49.50 ≤ 0.70 For example, the option ≤ 49.60 Hz and ≤ 1.00 sec means that the reserve must be fully activated in a maximum of one second, if the power system frequency is 49.60 Hz or below.
Alarm, Pre-alarm, Fault, Early warning, Monitor, Bypass, Test, Double knock Type Classification of output Bistable, Pulse Activation time Valid for “Pulse” outputs.
Otherwise you must mouseover the event dot on the graph to display it.– Display of measurements at mouseover of the curve :This option specifies which measurement points are displayed at mouseover (all or the closest)– The type of scale (dynamic or static) : In dynamic, the scale is adjusted regardin min and max values of the displayed area• For measurement table display– Activation time alignment : this option allow you to align data that are a little bit not synchronized.
An option at Activation time is to specify a threshold that would mark a member as suspected, before it is marked failed.