Carpet Extraction definition

Carpet Extraction. This task is designed to provide the deep cleaning of carpet. Since this task requires drying time, it can be performed on an adjusted PM work schedule. This is scheduled on an annual basis, or in cases of removal of water due to pipe / roof leaks, or due to other flooded areas. Top Scrubbing: This task is designed to refurbish waxed surfaces and to reduce the cost of labor and supplies associated with stripping floors. This task removes the first few layers of wax, avoiding the complete removal of wax – down to the tile. The Building Services team members will perform this task on an annual, or as needed basis; typically on a schedule of consecutive 3 years. Note: This task can be performed during an adjusted PM schedule to eliminate and reduce interruption to our customer’s day to day operations. Stripping Floors: This task is designed to remove all wax down to the tile. This is typically performed after 3 years of top scrubbing these surfaces. The Building Services team members will perform this task on an annual basis, or as needed. Note: This task is used in limited cases, when Boosting (equipment used to remove all wax, without the need for stripper) is not sufficient. Wax application: Provides protection and luster to tiled surfaces. The Building Services team members will provide this service on an annual basis, or as needed.
Sample 1Sample 2Sample 3
Carpet Extraction. This task is designed to provide the deep cleaning of carpet. Since this task requires drying time, it can be performed on an adjusted PM work schedule. This is scheduled on an annual basis, or in cases of removal of water due to pipe / roof leaks, or due to other flooded areas. Top Scrubbing: This task is designed to refurbish waxed surfaces and to reduce the cost of labor and supplies associated with stripping floors. This task removes the first few layers of wax, avoiding the complete removal of wax – down to the tile. The Environmental Services team members will perform this task on an annual, or as needed basis; typically on a schedule of consecutive 3 years. Note: This task can be performed during an adjusted PM schedule to eliminate and reduce interruption to our customer’s day to day operations. Terrazzo Floor Protection / Recoat: This process requires the removal of all finish on the terrazzo and the application of a stone protectant product being applied to the terrazzo, which repeated burnishing of the floors on a periodic basis. Note: This process is an exciting, ‘green’ service offered within our unit, and is being implemented in facilities across campus as time allows. Stripping Floors: This task is designed to remove all wax down to the tile. This is typically performed after 3 years of top scrubbing these surfaces. The Environmental Services team members will perform this task on an annual basis, or as needed. Note: This particular task is performed only in very limited areas and only when top-scrubbing, or procedures using the Boost floor removal equipment will not provide the needed removal of all floor finish. Wax application: Provides protection and luster to tiled surfaces. The Environmental Services team members will provide this service on an annual basis, or as needed.
Sample 1Sample 2
Carpet Extraction. This task is designed to provide the deep cleaning of carpet. Since this task requires drying time, it can be performed on an adjusted PM work schedule. This is scheduled on an annual basis, or in cases of removal of water due to pipe / roof leaks, or due to other flooded areas. Top Scrubbing: This task is designed to refurbish waxed surfaces and to reduce the cost of labor and supplies associated with stripping floors. This task removes the first few layers of wax, avoiding the complete removal of wax –down to the tile. The Building Services team members will perform this task on an annual, or as needed basis; typically on a schedule of consecutive 3 years. Note: This task can be performed during an adjusted PM schedule to eliminate and reduce interruption to our cust Stripping Floors: This task is designed to remove all wax down to the tile. This is typically performed after 3 years of top scrubbing these surfaces. The Building Services team members will perform this task on an annual basis, or as needed. Note: This task is used in limited cases, when Boosting (equipment used to remove all wax, without the need for stripper) is not sufficient. Wax application: Provides protection and luster to tiled surfaces. The Building Services team members will provide this service on an annual basis, or as needed.
Sample 1

Examples of Carpet Extraction in a sentence

  • Contract Carpet Extraction Cleaner is suitable for use on most carpets, subject to pretesting as directed.

  • Identified uses Contract Carpet Extraction Cleaner is a powerful and safe low foam detergent concentrate for use in carpet soil extraction machines.

  • Cleaner, Carpet, Edge Plus Encapsulation Carpet Extraction Cleaner, 4-1 gallon/cs., NCL #NCL66029, $87.73/case.

  • Cleaner, Carpet, Extraction Cleaner, 4-1 gallon/cs, Diversey #DVS503844, $56.34/case.

  • Price per Occurrence - Carpet Extraction Special Work Form included below.

  • Cleaner, Carpet, Extraction SC, J-Fill, 2-2.5 liter/cs., Diversey #DVS904972, $72.16/case, g.

  • Carpet – Carpet Extraction Shampoo When carpet extraction shampooing is complete, the surface shall be free of all deep seated dirt, stains and soiling and be left in a reasonable dry condition giving a clean uniform appearance in accordance with AS 3733.

  • Carpet Extraction portion of Task “B” priced by square foot with a minimum of 200 feet.Price per Sq. Ft.$ 0.204.

  • Carpet Extraction machine “Aqualclean” or other equal and approved brand.

  • Carpet Extraction (Shampoo) & Mopping Services: Full carpet extraction (shampoo) and full mopping is done in the evenings only prior to the first event day.


More Definitions of Carpet Extraction

Carpet Extraction. This task is designed to provide the deep cleaning of carpet. Since this task requires drying time, it can be performed on an adjusted PM work schedule. This is scheduled on an annual basis, or in cases of removal of water due to pipe / roof leaks, or due to other flooded areas. From time to time, it may be necessary for either the client or the Building Services unit to require a change of frequency in one or more areas. These changes need to be closely controlled and communicated, and would be covered by an agreed process. It is recommended that change requests from the client be submitted in advance with explanations and anticipated length of requested change to the Building Services Manager, Xxxx Xxxxxxxxxxx, via email to xxxx.xxxxxxxxxxx@xxx.xxx. Your Building Services Team Members are dedicated to providing the highest quality of services possible, to your our valued customer. We will strive to provide safe, clean spaces for each of you who work on, live at or visit our campus. We believe it is our duty to be positive role models every day for everyone we come in contact with to enrich their personal memories of WKU. We strive to maintain an individual pride in our daily contributions to enhance the University's success and global standing. Furthermore, we believe that if we are actively proactive in our efforts, we can insure quality customer service in all buildings across this great campus.
Sample 1
Carpet Extraction. This task is designed to provide the deep cleaning of carpet. Since this task requires drying time, it can be performed on an adjusted PM work schedule. This is scheduled on an annual basis, or in cases of removal of water due to pipe / roof leaks, or due to other flooded areas. Top Scrubbing: This task is designed to refurbish waxed surfaces and to reduce the cost of labor and supplies associated with stripping floors. This task removes the first few layers of wax, avoiding the complete removal of wax ʹdown to the tile. The Building Services team members will perform this task on an annual, or as needed basis; typically on a schedule of consecutive 3 years. Note: This task can be performed during an adjusted PM schedule to ĞůŝŵŝŶĂƚĞ ĂŶĚ ƌĞĚƵĐĞ ŝŶƚĞƌƌƵƉƚŝŽŶ ƚŽ ŽƵƌ ĐƵƐƚ Stripping Floors: This task is designed to remove all wax down to the tile. This is typically performed after 3 years of top scrubbing these surfaces. The Building Services team members will perform this task on an annual basis, or as needed. Note: This task is used in limited cases, when Boosting (equipment used to remove all wax, without the need for stripper) is not sufficient. Wax application: Provides protection and luster to tiled surfaces. The Building Services team members will provide this service on an annual basis, or as needed.
Sample 1

Related to Carpet Extraction

  • Extraction means a process by which cannabinoids are separated from cannabis plant material through chemical or physical means.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Carpet Area means the net usable floor, area of an Flat/Apartment, excluding the area covered by the external walls, areas under services shafts, excluding balcony or verandah area and exclusive open terrace, but includes the area covered by the internal partition walls of the flat/apartment;

  • Plant means the machinery and apparatus intended to form or forming part of the Works.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Landing Gear means the installed main and nose landing gear, components and their associated actuators, side braces and parts.

  • Plate means the license plate, including renewal decals, if any, issued for a vehicle registered under the plan by the base jurisdiction.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Sewage sludge means a solid, semi-solid, or liquid residue generated during the treatment of domestic sewage in a treatment works as defined in section 6111.01 of the Revised Code. "Sewage sludge" includes, but is not limited to, scum or solids removed in primary, secondary, or advanced wastewater treatment processes. "Sewage sludge" does not include ash generated during the firing of sewage sludge in a sewage sludge incinerator, grit and screenings generated during preliminary treatment of domestic sewage in a treatment works, animal manure, residue generated during treatment of animal manure, or domestic septage.

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Disinfection means a process which inactivates pathogenic organisms in water by chemical oxidants or equivalent agents.

  • Basement means any area of the building having its floor subgrade (below ground level) on all sides.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Area of shallow flooding means a designated AO or AH Zone on a community's Flood Insurance Rate Map (FIRM) with one percent or greater annual chance of flooding to an average depth of one to three feet where a clearly defined channel does not exist, where the path of flooding is unpredictable and indeterminate; and where velocity flow may be evident. Such flooding is characterized by ponding or sheet flow.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Plant Site (Works, Factory) means the local integration of one or more plants, with any intermediate administrative levels, which are under one operational control, and includes common infrastructure, such as:

  • Disinfectant means any oxidant, including but not limited to chlorine, chlorine dioxide, chloramines, and ozone added to water in any part of the treatment or distribution process, that is intended to kill or inactivate pathogenic microorganisms.

  • Common Area means all areas and facilities within the Project that are not designated by Landlord for the exclusive use of Tenant or any other lessee or other occupant of the Project, including the parking areas, access and perimeter roads, pedestrian sidewalks, landscaped areas, trash enclosures, recreation areas and the like.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Condensate means hydrocarbon liquid separated from natural gas which condenses due to changes in the temperature or pressure and remains liquid at standard conditions.

  • Ballast means a device used with an electric discharge lamp to obtain necessary circuit conditions, such as voltage, current, and waveform, for starting and operating the lamp.

  • Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.