Check Out Procedure definition

Check Out Procedure. Check Out is at 10 am on the morning of your departure. Please vacate the home by 10 am to allow us proper time to prepare the home for the next arrival. Guests are required to: remove all food products (from the pantry, fridge and freezer), start at least one load of laundry (sheets, towels), load and start the dishwasher, and bag all trash. We’ll take care of the rest!
Sample 1Sample 2Sample 3
Check Out Procedure. Check out time is no later than 10:00 a.m. on departure date. Check under beds, drawers and closets for personal belongings. Manager is not responsible for personal items left behind. Departure Maid Service includes stripping of beds, washing used linens, cleaning of property and trash removal. Leave both keys on kitchen counter. Guest will be charged for excessive cleaning, such as stains or spoiled food left behind. Maintenance: Guest is responsible for notifying Maintenance (231-881-6623) of any needed maintenance or repairs upon arrival or within 24 hours of occurrence. Manager or Maintenance will provide Guest with 2-hour notice during reasonable hours when feasible, except for emergency situations.
Sample 1

Examples of Check Out Procedure in a sentence

  • Check Out Procedure: Tenant must secure an appointment to check out of an apartment by arranging an appointment with Xxxxxxxx's designated representative at least forty eight (48) hours in advance of departure.

  • May God bless you as you utilize these resources to grow deeper in your relationship with Christ.Table of Contents‌ CATEGORY PAGE # YOUTH 1PARENTING 2MARRIAGE 3GOSPEL 4OUTREACH 5BIBLICAL FINANCE 6WORK 7LEADERSHIP 8MEN 9WOMEN 10BOOKS OF THE BIBLE 11INSPIRATION 12THE CHARACTER OF GOD 13THE CHRISTIAN LIFE 14PEOPLE IN THE BIBLE 15CHRISTIAN DISCIPLINES-1 16CHRISTIAN DISCIPLINES-2 17EVANGELISM 18RECOVERY 19CHRISTIANITY AND THE CULTURE 20 Rightnow Media Resource Check Out Procedure 1.

Related to Check Out Procedure

  • Settlement Procedures Timetable For offers to purchase Certificated Notes accepted by the Company, Settlement Procedures A through F set forth above shall be completed as soon as possible following the trade but not later than the respective times (New York City time) set forth below: Settlement Procedure Time ---------- ----

  • Staff Vetting Procedure means the Authority’s procedures for the vetting of personnel and as advised to the Contractor by the Authority.

  • Procedure means one or more surgical procedures or medical therapy performed in a Center of Excellence.

  • Complaints Procedure means the School's procedure for handling complaints from parents, as amended from time to time for legal or other substantive reasons, or in order to assist the proper administration of the School. It does not form part of the contract between you and the School. A copy of the most up-to-date procedure is on the School's website and is otherwise available from the School at any time upon request;

  • Method Detection Level or “MDL” means the minimum concentration of an analyte (substance) that can be measured and reported with a ninety- nine percent (99%) confidence that the analyte concentration is greater than zero (0) as determined by procedure set forth in 40 CFR 136, Appendix B. The method detection level or MDL is equivalent to the LOD.

  • Grievance Procedure is used in this Agreement, it shall be considered as including the arbitration procedure.

  • User seal check or "fit check" means an action conducted by the respirator user to determine if the respirator is properly seated to the face. Examples include negative pressure check, positive pressure check, irritant smoke check, or isoamyl acetate check.

  • Rules of Procedure means the rules of procedure adopted by the Fund Council for the management of its own business, as originally adopted on July 16, 2010 and amended from time to time.

  • Expedited Dispute Timetable means the accelerated timetable for the resolution of disputes as set out in paragraph 2.6;

  • Variation Procedure means the procedure for carrying out a Variation as set out in Clause 19.1 (Variation Procedure);

  • Check valve or “anti-drain valve” means a valve located under a sprinkler head, or other location in the irrigation system, to hold water in the system to prevent drainage from sprinkler heads when the sprinkler is off.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • Maximum Concentration Level Assessment means the Maximum Concentration Level Assessment for the purposes of a Basic Comprehensive Certificate of Approval, described in the Basic Comprehensive User Guide, prepared by a Toxicologist using currently available toxicological information, that demonstrates that the concentration at any Point of Impingement for a Compound of Concern that does not have a Ministry Point of Impingement Limit is not likely to cause an adverse effect as defined by the EPA. The concentration at Point of Impingement for a Compound of Concern must be calculated in accordance with O. Reg. 419/05.

  • Call Off Procedure means the process for awarding a Call Off Agreement pursuant to Clause 4 (Call Off Procedure) and Framework Schedule 5 (Call Off Procedure);

  • Security procedure means a procedure employed for the purpose of verifying that an electronic signature, record, or performance is that of a specific person or for detecting changes or errors in the information in an electronic record. The term includes a procedure that requires the use of algorithms or other codes, identifying words or numbers, encryption, or callback or other acknowledgment procedures.

  • Method Detection Limit (MDL means the minimum concentration of a substance (analyte) that can be measured and reported with 99 percent confidence that the analyte concentration is greater than zero and is determined from analysis of a sample in a given matrix containing the analyte.

  • Direct Ordering Procedure means the ordering procedure set out in paragraph 2 of Schedule 5 (Ordering Procedure) of this Framework Agreement;

  • Follow-up means the organized method of systematically determining the status of consumers after they have been discharged to determine post-treatment outcomes and utilization of post-treatment referrals.

  • Table E academic outcomes at receiving institution

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Main Distribution Frame (MDF) means the termination frame for outside facility and inter-exchange office equipment at the CO.

  • Step 2 The Union Representative or Representatives may take the matter up with the Employer official designated by the Employer to handle Labour Relations matters. If the matter is not taken up within ten (10) calendar days of the date the Union received the written reply to the grievance in Step 1, it shall be deemed to have been abandoned and further recourse to the Grievance Procedure shall be forfeited.

  • Additional Day-ahead Scheduling Reserves Requirement means the portion of the Day- ahead Scheduling Reserves Requirement that is required in addition to the Base Day-ahead Scheduling Reserves Requirement to ensure adequate resources are procured to meet real-time load and operational needs, as specified in the PJM Manuals.

  • Distribution Tariff means the Distribution Tariff prepared by the Company and approved by the Commission on an interim or final basis, as the case may be;