Integrated testing definition

Integrated testing means testing of the FSTD such that all aircraft system models are active and contribute appropriately to the results. None of the aircraft system models should be substituted with models or other algorithms intended for testing only. This may be accomplished by using controller displacements as the input. These controllers should represent the displacement of the pilot’s controls and these controls should have been calibrated.
Sample 1Sample 2Sample 3
Integrated testing in the contracts where applicable means the programme of tests performed by the Contractor at the direction of the Engineer following satisfactory completion of Contractor‟s tests on his equipment, sub-systems or system to verify and confirm the compatibility and compliant performance of his equipment/ sub-system/ system with the equipment/ sub-system/ system provided by others.
Sample 1Sample 2
Integrated testing means the programme of tests performed by the Contractor at the direction of the Engineer following satisfactory completion of Contractor’s tests on his equipment, sub-systems or system to verify and confirm the compatibility and compliant performance of his equipment/ sub-system/ system with the equipment/ sub-system/ system provided by others.
Sample 1Sample 2Sample 3

Examples of Integrated testing in a sentence

  • Openly Connected's Integrated Testing Practice, through-out the life cycle of the project ensures it conforms to the specification and works correctly prior ever turning it over to the client.

  • The Contractor shall design, if in the scope of work, manufacture, execute, install, complete, test (including Integrated Testing in case of rolling stock and signalling contracts) and commission, the Works, including providing Construction and/or Manufacture Documents, within the Time for Completion and shall remedy any defects within the Contract Period.

  • The Contractor shall also carry out Integrated Testing and Commissioning of L&E System inclusive of Fire protection system in co-ordination with Designated Contractors, under the supervision of the Engineer.

  • The discount is not available for the ncleX-rn Qbank or ncleX-Pn Qbank products or ncleX- rn or ncleX-Pn Integrated Testing programs.

  • By a contract dated [ (“the Contract”) made between (1) the Delhi Metro Rail Corporation Limited (“the Employer” and (2) the Contractor, the Contractor has agreed to design, execute, complete, test and commission ( including Integrated Testing and Commissioning) and remedy any defect in the Works upon the terms and conditions contained in the Contract.

  • Using System Overview Training as a stepping stone, Operations Training empowers the CITY’s core team so they can perform Integrated Testing.

  • Multiple and different meter read cycles will be utilized and UNIVERUS will guide this effort per the agreed to Integrated Testing Plan, with the project team providing the analysis and validation.

  • STS shall subject such patches to Unit Testing, System Testing and Integrated Testing.

  • UNIVERUS uses a structured Integrated Testing approach to ensure the previously described principles are followed.

  • In addition, Integrated Testing will also serve to solidify THE CITY’s business processes.


More Definitions of Integrated testing

Integrated testing to determine whether the components of each Deliverable interface and integrate properly with the County System, and whether the components of each such Deliverable operate in the Approved operating configuration and in accordance with applicable specifications; and
Sample 1Sample 2
Integrated testing means the programme of tests performed by the Contractor at the direction of the Engineer following satisfactory completion of Contractor’s tests on his equipment, sub-systems or system to verify and confirm the compatibility and compliant performance
Sample 1Sample 2
Integrated testing means a clinical test on a human subject wherein the method of harvesting the subject's interstitial fluid "ISF" and assaying the glucose levels may be implemented in its entirety with laboratory based prototype devices which may have physical embodiment substantially different from the production design to be realized later, but which utilize the basic concepts (e.g., microporation, ultrasonic pumping, or whatever basic concepts are employed) and demonstrate the feasibility of these concepts in a clinical testing environment showing the ability to produce an assayable amount of ISF within two minutes, without causing tissue damage greater than grade two on a scale of one to four, wherein grade one is mild erythema and grade four is blistering of the skin.
Sample 1
Integrated testing means the testing of any independent module incorporated in the Software in so far as the existing STS system configuration matches Customer’s system configuration.
Sample 1

Related to Integrated testing

  • Combined sewer system means a system for conveying both sanitary sewage and storm water runoff.

  • Integrated resource plan means a plan which contains the demand and energy forecast for at least a fifteen-year period, contains the supplier's or producer's program for meeting the requirements shown in its forecast in an economic and reliable manner, including both demand-side and supply-side options, with a brief description and summary cost-benefit analysis, if available, of each option which was considered, including those not selected, sets forth the supplier's or producer's assumptions and conclusions with respect to the effect of the plan on the cost and reliability of energy service, and describes the external environmental and economic consequences of the plan to the extent practicable. For electrical utilities subject to the jurisdiction of the South Carolina Public Service Commission, this definition must be interpreted in a manner consistent with the integrated resource planning requirements pursuant to Section 58‑37‑40 and any process adopted by the commission. For electric cooperatives subject to the regulations of the Rural Electrification Administration, this definition must be interpreted in a manner consistent with any integrated resource planning process prescribed by Rural Electrification Administration regulations.

  • Path means the Port Authority Trans-Hudson Corporation.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Network Element is As Defined in the Act.