Path Length definition

Path Length means, for an extractive optical CEMS, the distance in meters of the optical path within a gas measurement cell. For an IP-CEMS, path length means the distance in meters of the optical path that passes through the source gas in the stack or duct.
Sample 1Sample 2Sample 3
Path Length means, for an extractive optical CEMS, the distance in meters of the optical path within a gas measurement cell. For an IP–CEMS, path length means the distance in meters of the optical path that passes through the source gas in the stack or duct.3.25 Zero gas means a gas or liquid with an HCl concentration that is below the LOD of the measurement system.* * * * *11.0 Performance Specification Test Procedure* * * * *11.5.6.5 If your system LOD field verification does not demonstrate a SARtemperature and gas matrix effects derived from the HITRAN and/or manufacturer specific database (unitless);DMCavg = Average of the 3 absolute values of the difference between the measured HCl calibration gas concentrations with and without interference from selected stack gases (ppmv);MCi = Measured HCl reference gas
Sample 1

Examples of Path Length in a sentence

  • Basic Constraints YESSubject TypeEnd Entity Path Length ConstraintNot used 8.

  • We have chosen the Path Length algorithm [29] which is a simple edge counting technique.

  • BGP table probed IP forward paths difference San Diego, CA, US 2001/05/01 -5 0 5 10 Path Length tribution of AS path lengths generated from the topology probes.

  • Minimum Detection Limits of the SafEye 420 Path Length Table 6-3.

  • E by Availability, 4 QAM...............7 Figure 2-5 - Path Length & Fade Margin, CCIR Reg.

  • Subordinate CA certificates, issued under this policy, have a Path Length Constraint set to zero (0) and Name Constraints specifying permitted dnsName sub-trees only for the .gov and .mil Top Level Domains.

  • Although the Quickest Path Length, Continuous Connectivity Index and Netscan model decrease the quality of the connection according to the connecting times, but neither model establishes a specific maximum connecting time.

  • Similarly, the Critical Path Length Index (CPLI), which measures the efficiency required to complete a milestone on time,5 only gives some signal of schedule risk and is driven by expected future performance.

  • Shown are the Clustering Coefficient (C), the average path length (L), The Cooperative Connected Paths (CCP) measure and the average Cooperative Connected Path Length (CCPL).

  • However, if all links were included in a Path Length of 1, it would be interpreted that all nodes were connected by a single link to each other.

Related to Path Length

  • overall length means the distance between the two vertical planes perpendicular to the median longitudinal plane of the vehicle and touching its front and rear outer edge, disregarding the projection:

  • Stage Length The stage length is defined as the sum of the distances for the climbout maneuver, climb, cruise, and descent.

  • Length (L) means 96 per cent of the total length on a waterline at 85 per cent of the least moulded depth measured from the top of the keel, or the length from the foreside of the stem to the axis of the rudder stock on that waterline, if that be greater. In ships designed with a rake of keel the waterline on which this length is measured shall be parallel to the designed waterline. The length (L) shall be measured in metres.

  • Accumulation Period Length means 12 months; provided, however, if the commencement of the Accumulation Period is delayed in accordance with Section 2.11 hereof, the Accumulation Period Length shall be determined in accordance with the definition of “Accumulation Period Length” in the Indenture Supplement.

  • Controlled Accumulation Period Length has the meaning specified in subsection 4.03(c).

  • Arm’s Length has the meaning ascribed to such term for the purposes of the Income Tax Act (Canada);

  • Arm’s Length Transaction means a transaction between two related parties that is conducted as if they were unrelated, so that there is no conflict of interest.

  • Arm s length transaction” means a transaction between two related parties that is conducted as if they were unrelated, so that there is no conflict of interest.

  • Cubic Metre means the volume of gas which occupies one cubic metre when such gas is at a temperature of 15 degrees Celsius, and at a pressure of 101.325 kilopascals absolute;

  • Cubic Meter or "m3" means the volume of Petroleum which occupies one (1) cubic meter and equals 264.1721 United States gallons and 6.2898108 barrels.

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Planned special exposure means an infrequent exposure to radiation, separate from and in addition to the annual occupational dose limits.

  • Baseline concentration means that ambient concentration level that exists in the baseline area at the time of the applicable minor source baseline date. A baseline concentration is determined for each pollutant for which a minor source baseline date is established and shall include the following:

  • Strength means a feature or aspect of the SOQ that exceeds the minimum requirements of the RFQ and increases the chance of successful Contract performance. A significant Strength in the SOQ is a feature or aspect that exceeds the minimum requirements of the RFQ and increases the chance of successful Contract performance.

  • Volatility Buffer means, with respect to a Transaction, an amount equal to the product of (a) the Factor applicable to the Transaction and (b) the Notional Amount of the Transaction.

  • Loop Concentrator/Multiplexer or "LCM" is the Network Element that does one or more of the following: aggregates lower bit rate or bandwidth signals to higher bit rate or bandwidth signals (multiplexing); disaggregates higher bit rate or bandwidth signals to lower bit rate or bandwidth signals (demultiplexing); aggregates a specified number of signals or channels to fewer channels (concentrating); performs signal conversion, including encoding of signals (e.g., analog to digital and digital to analog signal conversion); or in some instances performs electrical to optical (E/O) conversion. LCM includes DLC, and D4 channel banks and may be located in Remote Terminals or Central Offices.

  • Export Transactions Net Activity means the aggregate net total, resulting from Export Transactions, of (i) Spot Market Energy charges, (ii) Transmission Congestion Charges, and (iii) Transmission Loss Charges, calculated as set forth in Operating Agreement, Schedule 1 and the parallel provisions of Tariff, Attachment K-Appendix. Export Transactions Net Activity may be positive or negative.

  • Arms length Transaction”, means a transaction between two related parties that is conducted as if they were unrelated, so that there is no conflict of interest.

  • Bundled transaction means the purchase of 2 or more distinct and identifiable products, except real property and services to real property, where the products are sold for a single nonitemized price. A bundled transaction does not include the sale of any products in which the sales price varies, or is negotiable, based on the selection by the purchaser of the products included in the transaction. As used in this subdivision:

  • X-ray high-voltage generator means a device which transforms electrical energy from the potential supplied by the X-ray control to the tube operating potential. The device may also include means for transforming alternating current to direct current, filament transformers for the X-ray tube(s), high-voltage switches, electrical protective devices, and other appropriate elements.

  • Lot width means the shorter of the following two linear measurements:

  • Carbon dioxide equivalent or "CO2e" means an amount of greenhouse gas or gases expressed as the equivalent amount of carbon dioxide, and is computed by multiplying the mass of each of the greenhouse gases by the global warming potential published for each gas at 40 CFR part 98, subpart A, Table A–1—Global Warming Potentials, and adding the resulting value for each greenhouse gas to compute the total equivalent amount of carbon dioxide.

  • Controlled unaffiliated business means a company:

  • Diversity Score means, as of any day, a single number that indicates collateral concentration in terms of both issuer and industry concentration, calculated as set forth in Schedule 7 hereto, as such Diversity Scores shall be updated at the option of the Administrative Agent in its sole discretion if Xxxxx’x publishes revised criteria.

  • Overall width of a vehicle means a dimension which is measured according to ISO standard 612-1978, term No. 6.2. In the case of vehicles of category other than M1, in addition to the provisions of that standard, when measuring the vehicle width the following devices shall not be taken into account:

  • Related Financial Product means any financial product which references directly or indirectly the Preference Shares.