Standard Operating Practice definition

Standard Operating Practice means such practices, methods, acts, techniques, and standards as are in accordance with the normal and customary practices in the industry and applicable Laws, and consistent with the historical operation of the Refinery Complex by the Related Refinery Owner.
Sample 1Sample 2Sample 3
Standard Operating Practice means effective and competent treatment plant operation which is consistent with the existing plant design and operations manual, manufacturer's equipment specifications, professionally accepted treatment plant operation procedures as contained in the manuals listed in rule 62-602.660, and Department rules. This definition applies to functions which directly affect plant operations and which can be reasonable controlled by the operator.
Sample 1Sample 2
Standard Operating Practice means effective and competent treatment plant or water distribution system operation that is consistent with the existing treatment plant or water distribution system design, the existing treatment plant operation and maintenance manual(s), manufacturers’ equipment manuals, professionally accepted operation procedures as contained in the technical manuals listed in Rule 62-602.660, F.A.C., and applicable Department rules. This definition applies to functions that directly affect treatment plant or water distribution system operation and that can be reasonably controlled by the operator.
Sample 1

Examples of Standard Operating Practice in a sentence

  • Standard Operating Practice (SOP) for the Transfer of Position Responsibility Appendix A−1 Appendix B.

  • Air Traffic Control, Appendix A, Standard Operating Practice (SOP) for the Transfer of Position Responsibility, or FAA Order JO 7110.10, Flight Services, Paragraph 1−3−3, Duty Familiarization and Transfer of Position Responsibility.

  • Standard Operating Practice (SOP) for Aircraft Deviating for Weather NearActive Special Activity Airspace (SAA) Appendix B−1PILOT/CONTROLLER GLOSSARY.

  • Subject to Article 8, Delek Refining shall be responsible for operating and maintaining the SUMF Assets, at its sole cost and expense, in accordance with Standard Operating Practice.

  • The qualifications of any such subcontractor shall be presented to the County in accordance with the County's Standard Operating Practice and Procedures.

  • A structure of this plan and hierarchy of process flow for environmental management of each component is prepared and elaborated below as Standard Operating Practice (SOP) for Environment Management Cell, which is self-explanatory.

  • The Related Refinery Owner shall provide all Service Items to the Relevant Asset Owner and perform all services hereunder in accordance with Standard Operating Practice.

  • Subject to Article 8, Lion shall be responsible for operating and maintaining the SUMF Assets, at its sole cost and expense, in accordance with Standard Operating Practice.

  • Standard Operating Practice (SOP) for the Transfer of Position Responsibility Appendix D−1INDEX.

  • Standard Operating Practice (SOP) for the Transfer of Position Responsibility Appendix A−1PILOT/CONTROLLER GLOSSARY.


More Definitions of Standard Operating Practice

Standard Operating Practice means such practices, methods, acts, techniques, and standards as are in accordance with the normal and customary practices in the industry and Applicable Laws, and consistent with the historical operation of the Refinery Site by Lion. “SUMF Assets” means the systems and facilities located at the Refinery Site that are used in or necessary for the provision of the SUMF Items to Delek Logistics pursuant to this Agreement. The SUMF Assets shall include any Connection Facilities. “SUMF Items” has the meaning set forth in the recitals. “Term” has the meaning set forth in Section 10.1. “Third Party” means any Person other than Lion, Delek Logistics or their respective Affiliates. “Throughput Agreement” means the Throughput and Tankage Agreement (El Dorado Terminal and Tankage) by and between Lion and Delek Logistics dated as of the date hereof.
Sample 1
Standard Operating Practice means the procedure document, consistent with the Generator Interconnection Agreement, to be entered into between the Transmission Service Provider and the Successful Proponent governing the operating interface between the selected EPP Project and the SaskPower Electric System.
Sample 1
Standard Operating Practice means such practices, methods, acts, techniques, and standards as are in accordance with the normal and customary practices in the industry and Applicable Laws, and consistent with the historical operation of the Refinery Site by Delek Refining. “SUMF Assets” means the systems and facilities located at the Refinery Site that are used in or necessary for the provision of the SUMF Items to Delek Marketing pursuant to this Agreement. The SUMF Assets shall include any Connection Facilities. “SUMF Items” has the meaning set forth in the Recitals. “Term” has the meaning set forth in Section 10.1. “Third Party” means any Person other than Delek Refining, Delek Marketing or their respective Affiliates. “Throughput Agreement” means the Throughput and Tankage Agreement (Tyler Terminal and Tankage) by and between Delek Refining and Delek Marketing dated as of the date hereof.
Sample 1
Standard Operating Practice means such practices, methods, acts, techniques, and standards as are in accordance with the normal and customary practices in the industry and Applicable Laws, and consistent with the historical operation of the Refinery Site by Delek Refining. “SUMF Assets” means the systems and facilities located at the Refinery Site that are used in or necessary for the provision of the SUMF Items to Delek Marketing pursuant to this Agreement. The SUMF Assets shall include any Connection Facilities. “SUMF Failure” has the meaning set forth in Section 3.1(b). “SUMF Items” has the meaning set forth in the recitals. “Tankage Agreement” means the Tankage Agreement (Tyler Crude Storage Tank 701) by and between Delek Refining and Delek Marketing dated as of the date hereof. “Term” has the meaning set forth in Section 10.1. “Third Party” means any Person other than Delek Refining, Delek Marketing or their respective Affiliates. “Throughput Agreement” means the Throughput and Tankage Agreement (Tyler Terminal and Tankage) by and between Delek Refining and Delek Marketing dated as of July 26, 2013. “Throughput and Tankage Agreements” means the Throughput Agreement and the Tankage Agreement.
Sample 1
Standard Operating Practice means effective and competent treatment plant or water distribution system operation that is consistent with the existing treatment plant or water distribution
Sample 1
Standard Operating Practice means such practices, methods, acts, techniques, and standards as are in accordance with the normal and customary practices in the industry and Applicable Laws, and consistent with the historical operation of the Refinery Site by Lion. “SUMF Assets” means the systems and facilities located at the Refinery Site that are used in or necessary for the provision of the SUMF Items to Delek Logistics pursuant to this Agreement. The SUMF Assets shall include any Connection Facilities. “SUMF Failure” has the meaning set forth in Section 3.1(b). “SUMF Items” has the meaning set forth in the recitals. “Term” has the meaning set forth in Section 10.1. “Terminal and Tankage Lease and Access Agreement” has the meaning set forth in the recitals. “Third Party” means any Person other than Lion, Delek Logistics or their respective Affiliates. “Throughput Agreement” means the Throughput and Tankage Agreement (El Dorado Terminal and Tankage) by and between Lion and Delek Logistics dated as of February 10, 2014, as amended, supplemented or restated from time to time. “Throughput and Rail Offloading Agreements” means the Throughput Agreement and the Rail Offloading Agreement.
Sample 1

Related to Standard Operating Practice

  • Prudent Operating Practice means (a) the applicable practices, methods and acts required by or consistent with applicable laws and reliability criteria, and otherwise engaged in or approved by a significant portion of the electric power industry during the relevant time period in the Western United States, or (b) any of the practices, methods and acts which, in the exercise of reasonable judgment in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result at a reasonable cost consistent with good business practices, reliability, safety and expedition. Prudent Operating Practice is not intended to be limited to the optimum practice, method or act to the exclusion of all others, but rather to acceptable practices, methods or acts generally accepted in the electric power industry in the Western United States.

  • Standard operating procedure means a formal written procedure offi- cially adopted by the plant owner or operator and available on a routine basis to those persons responsible for carrying out the procedure.

  • Standard Operating Procedures or “SOP” means the procedures as specified in the Annexes or Attachments to the relevant Schedules;

  • Good Engineering Practice means, Works carried out in accordance with the following standards/ specifications,

  • Good Manufacturing Practice or “GMP” means the current good manufacturing practices applicable from time to time to the manufacturing of a Product or any intermediate thereof pursuant to Applicable Law.

  • Current Good Manufacturing Practices or “cGMP” means applicable Good Manufacturing Practices as specified in the United States Code of Federal Regulations and/or the EU Good Manufacturing Guidelines, and any successor legislation from time to time, prevailing at the time of the manufacture of the Product.

  • Good Manufacturing Practices or “GMP” means, with respect to the United States, the minimum then-current good manufacturing practices for methods, facilities, and controls to be used for the manufacture, processing, packing, or holding of a drug to assure that it meets the requirements of the Federal Food, Drug, and Cosmetic Act for safety and has the identity and strength and meets the quality and purity characteristics, specified in 21 C.F.R. Parts 210 and 211, as may be amended, and, with respect to any other country or jurisdiction, the equivalent regulations in such other country or jurisdiction.

  • Reasonable and Prudent Operator means a Person seeking in good faith to perform its contractual obligations, and in so doing, and in the general conduct of its undertaking, exercising that degree of skill, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced operator engaged in the same type of undertaking under the same or similar circumstances and conditions.

  • Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.

  • Prudent Industry Practice means such practices, methods, acts, techniques, and standards as are in effect at the time in question that are consistent with (a) the standards generally followed by the United States pipeline and terminalling industries or (b) such higher standards as may be applied or followed by the HFC Entities in the performance of similar tasks or projects, or by the HEP Entities in the performance of similar tasks or projects.

  • Prudent Electrical Practices means any of the practices, methods and acts engaged in or approved by a significant portion of the electrical utility industry or any of the practices, methods or acts, which, in the exercise of reasonable judgment in the light of the facts known at the time a decision is made, could have been expected to accomplish the desired result at the lowest reasonable cost consistent with reliability, safety and expedition. Prudent Electrical Practices is not intended to be limited to the optimum practice, method or act to the exclusion of all others, but rather to be a spectrum of possible practices, methods or acts.

  • Best Industry Practice means that degree of skill, care and foresight and operating practice that would reasonably and ordinarily be expected of a skilled and competent supplier of services engaged in the same type of undertaking as that of the Recipient or any contractors (as applicable) under the same or similar circumstances as those contemplated by this Agreement.

  • Promising practice means a practice that presents, based upon preliminary information, potential for becoming a research-based or consensus-based practice.

  • Prudent Utility Practice means the applicable practices, methods, and acts engaged in or approved by a significant portion of the electric utility industry in the United States of America, during the relevant time period, or any of the practices, methods and acts which, in the exercise of reasonable judgment by a prudent utility operator, in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result consistent with good business practices, reliability, safety, expedition and the requirements of any governmental authority having jurisdiction. The Parties agree to provide such reasonable cooperation to each other as necessary to give effect to the terms of this Confirmation Agreement.

  • Good Utility Practice means any of the practices, methods and acts engaged in or approved by a significant portion of the electric utility industry during the relevant time period, or any of the practices, methods and acts which, in the exercise of reasonable judgment in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result at a reasonable cost consistent with good business practices, reliability, safety and expedition. Good Utility Practice is not intended to be limited to the optimum practice, method, or act to the exclusion of all others, but rather to be acceptable practices, methods, or acts generally accepted in the region.

  • Reasonable and prudent parent standard means the standard characterized by careful and sensible parental decisions that maintain the health, safety, and best interests of a child while at the same time encourage the emotional and developmental growth of the child, that a caregiver shall use when determining whether to allow a child in foster care under the responsibility of the state to participate in extracurricular, enrichment, cultural, and social activities. For the purposes of this definition, “caregiver” means a foster parent with whom a child in foster care has been placed or a designated official for a child care institution (including group homes, residential treatment, shelters, or other congregate care settings) in which a child in foster care has been placed.

  • Uniform Standards of Professional Appraisal Practice means the current standards of the appraisal profession, developed for appraisers and users of appraisal services by the Appraisal Standards Board of the Appraisal Foundation.

  • cGMP means current Good Manufacturing Practices as specified in the United States Code of Federal Regulations, ICH Guideline Q7A, or equivalent laws, rules, or regulations of an applicable Regulatory Authority at the time of manufacture.

  • Prudent Industry Practices means, at a particular time, any of the practices, methods, standards of care, skill, safety and diligence, as the same may change from time to time, but applied in light of the facts known at the time, that are consistent with the general standards applied or utilized under comparable circumstances by a reasonably prudent operator, in a good and workmanlike manner, with due diligence and dispatch, in accordance with good midstream industry practice.

  • Discriminatory housing practice means an act that is unlawful under this chapter.

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • standards of generally recognised accounting practice means an accounting practice complying with standards applicable to municipalities or municipal entities as determined by the Accounting Standards Board

  • Customary Servicing Practices means the customary servicing practices of the Servicer or any Sub-Servicer with respect to all comparable motor vehicle receivables that the Servicer or such Sub-Servicer, as applicable, services for itself and others, as such customary servicing practices may be changed from time to time, it being understood that the Servicer and the Sub-Servicers may not have the same “Customary Servicing Practices.”

  • Certificate of Catholic Practice means a certificate issued by the family’s parish priest (or the priest in charge of the church where the family attends Mass) in the form laid down by the Bishops’ Conference of England and Wales. It will be issued if the priest is satisfied that at least one Catholic parent or carer (along with the child, if he or she is over seven years old) have (except when it was impossible to do so) attended Mass on Sundays and holy days of obligation for at least five years (or, in the case of the child, since the age of seven, if shorter). It will also be issued when the practice has been continuous since being received into the Church if that occurred less than five years ago. It is expected that most Certificates will be issued on the basis of attendance. A Certificate may also be issued by the priest when attendance is interrupted by exceptional circumstances which excuse from the obligation to attend on that occasion or occasions. Further details of these circumstances can be found in the guidance issued to priests http://rcdow.org.uk/education/governors/admissions/

  • Prudent Utility Practices means those practices, methods, techniques and standards, that are generally accepted for use in electric utility industries taking into account conditions in India, and commonly used in prudent electric utility engineering and operations to design, engineer, construct, test, operate and maintain equipment lawfully, safely, efficiently and economically as applicable to power stations of the size, service and type of the Project, and that generally conform to the manufacturers' operation and maintenance guidelines.