Total Unavailability definition

Total Unavailability has the meaning set out in Schedule 8 [Payments];
Sample 1Sample 2Sample 3
Total Unavailability in respect of the Facility occurs when:
Sample 1Sample 2
Total Unavailability has the meaning set out in Schedule 8 [Payments]; “Transfer Date” has the meaning set out in Schedule 7 [Lands];
Sample 1

Examples of Total Unavailability in a sentence

  • At customer’s request, Unity will calculate Total Unavailability.

  • After 10D Tech’s closure of the critical trouble ticket, for each cumulative hour of Total Unavailability, customer’s account shall be credited the pro-rated charges for one day of the monthly charges assigned to the respective End User and specifically affected by the total outage.

  • Total Unavailability will be counted only if the customer opens a Critical trouble ticket over the phone with Unity’s customer support within twelve (12) hours of the total outage.

  • The following means times to repair (MTTR) will be considered: Severity Type of Impact Solution¹ Target2 Period of Execution P1 Total Unavailability • Service is unavailable for a specific client (link out of service); • Error rate in the data link or Internet that completely prevents the normal flow of data; • Client prevented from using the service.

  • When a Total Unavailability occurs, there will be deemed to be a Routine Unavailability Event for each Functional Unit that otherwise met the Availability Condition at that time and all Functional Units will continue to be deemed to be Unavailable until the Total Unavailability no longer exists.

  • When Total Unavailability occurs in the New Facility, there will be deemed to be an Unavailability Event for each Functional Unit in the New Facility that otherwise met the Availability Condition at that time and all such Functional Units will continue to be deemed to be Unavailable until Total Unavailability no longer occurs.

  • If (a) a Performance Failure or an Unavailability Event occurs for which there is a Rectification Period (other than a deemed Unavailability Event due to the Total Unavailability of any School), and (b) Developer Rectifies the Performance Failure or Unavailability Event within the first Rectification Period, no Deduction will be made for such Performance Failure or Unavailability Event.

  • Total Unavailability comprises the number of minutes in which the Unity UCaaS Solution service was completely unavailable or as mutually agreed to be performing so poorly as to be effectively unusable within the demarcation point of Unity’s data center infrastructure.

  • This level can be redefined in successive sessions of application of the methodology; Identification of IT Risk Scenarios and Threats: such as Total Unavailability of information systems, Degradation of service quality, Breach of data privacy, Compromised data integrity, Loss of Data Quality.

  • When Total Unavailability occurs in respect of the Facility, there will be deemed to be an Unavailability Event for each Functional Unit that otherwise met the Availability Condition at that time and all such Functional Units will continue to be deemed to be Unavailable until such Total Unavailability no longer occurs.


More Definitions of Total Unavailability

Total Unavailability is defined as the total time in minutes between the Start Time and the End Time (rounded up to the nearest whole minute) in the relevant Measurement Period (or First Measurement Period) during which the Core Services were inoperable or unusable as determined in accordance with the unavailability computation calculated pursuant to paragraph 5 of this Schedule. Subject to any express provisions of the Agreement, the Company shall maintain the Service Levels for each of the Core Services as set out in paragraph 2 of this Schedule. If, in any one event, more than one of the Core Services fails, the Unavailability Computation will be based on only the longest duration of any of these Core Services in that said event. Core Services and Service Levels shall mean: Core Service Measurement Period First Measurement Period Power A service level of 100% for power to the data centre A service level of 100% for power to the data centre Climate An average temperature of between 19ºC and 23ºC across the data centre An average temperature of between 19ºC and 23ºC across the data centre Fire Detection A service level of 100% to the data centre floors A service level of 100% to the data centre floors Security Security systems will operate on a 24/7/365 basis and will operate to 100% capability Security systems will operate on a 24/7/365 basis and will operate to 100% capability Virtual Server A service level of 100% of availability to your unique virtual server instance A service level of 100% of availability to your unique virtual server instance Exclusions from Service Levels The parties agree that, notwithstanding any other provision in this Agreement, the Company will not be responsible for failure to provide the Core Services or failure to meet the Service Levels to the extent that the failure is due to:
Sample 1
Total Unavailability means that actors effectively cannot perform any of their tasks and responsibilities using the telecom service (e.g. phone calls can be made but are completely unintelligible because of extremely poor quality).
Sample 1
Total Unavailability occurs when:
Sample 1
Total Unavailability has the meaning set forth in Section 1.1 (Definitions) of Exhibit X-2 (Deductions).
Sample 1

Related to Total Unavailability

  • Unavailability (or “Unavailable”) the Flexibility Services, in accordance with the Service Requirements, are not Available to be delivered to the Company; “Utilisation Instruction” an instruction by the Company to the Provider to deliver Flexibility Services;

  • Benchmark Unavailability Period means, the period (if any) (a) beginning at the time that a Benchmark Replacement Date has occurred if, at such time, no Benchmark Replacement has replaced the then-current Benchmark for all purposes hereunder and under any Loan Document in accordance with Section 2.14 and (b) ending at the time that a Benchmark Replacement has replaced the then-current Benchmark for all purposes hereunder and under any Loan Document in accordance with Section 2.14.

  • Suppressed Availability means, at any time, an amount equal to the amount (if any, but in no event less than zero) by which the Borrowing Base exceeds the aggregate Revolving Commitments at such time.

  • Scheduled Unavailability Date has the meaning specified in Section 3.03(b).

  • Service Availability The total number of minutes in a calendar quarter that the Tyler Software is capable of receiving, processing, and responding to requests, excluding maintenance windows, Client Error Incidents and Force Majeure.

  • Average Availability means, with respect to any period, the sum of the aggregate amount of Availability for each Business Day in such period (calculated as of the end of each respective Business Day) divided by the number of Business Days in such period.

  • Availability Block means $15,000,000.

  • System Availability for each System is calculated as follows:

  • Adjusted Total turnover means the turnover in a State or a Union territory, as defined under sub-section (112) of section 2, excluding the value of exempt supplies other than zero-rated supplies, during the relevant period;

  • Maximum Availability means, as of any date of determination, the difference of (i) the Facility Amount minus (ii) the balance of all unfunded Advances approved but not yet funded minus (iii) the Aggregate Unfunded Amount plus (iv) all amounts on deposit in the Unfunded Exposure Account, each as of such date of determination.

  • Availability Amount is (a) the lesser of (i) the Revolving Line or (ii) the amount available under the Borrowing Base minus (b) the outstanding principal balance of any Advances.

  • Required Availability means Excess Availability and unrestricted cash and Cash Equivalents in an amount of not less than $5,000,000.

  • Average Daily Availability means the average daily Availability for the immediately preceding Fiscal Quarter.

  • Emergency expulsion means the removal of a student from school because the student’s statements or behavior pose an immediate and continuing danger to other students or school personnel, or an immediate and continuing threat of material and substantial disruption of the educational process, subject to the requirements in WAC 392-400-510 through 392-400-530

  • Total Floor Area means, the sum total of the total areas of all floors in a building or structure whether at above or below grade measured between the exterior faces of the exterior walls of the building or structure or from the centre line of a common wall separating two uses or from the outside edge of a floor where the outside edge of the floor does not meet an exterior or common wall, and;

  • Undrawn Availability at a particular date shall mean an amount equal to (a) the lesser of (i) the Formula Amount, or (ii) the Maximum Revolving Advance Amount, minus the Maximum Undrawn Amount of all Letters of Credit, minus (b) the sum of (i) the outstanding amount of Revolving Advances, plus (ii) amounts due and owing to any Borrower’s trade creditors which are outstanding sixty (60) days or more past the due date thereof.

  • Net Xxxx-to-Market Exposure of a Person means, as of any date of determination, the excess (if any) of all unrealized losses over all unrealized profits of such Person arising from Rate Management Transactions. “Unrealized losses” means the fair market value of the cost to such Person of replacing such Rate Management Transaction as of the date of determination (assuming the Rate Management Transaction were to be terminated as of that date), and “unrealized profits” means the fair market value of the gain to such Person of replacing such Rate Management Transaction as of the date of determination (assuming such Rate Management Transaction were to be terminated as of that date).

  • Final Availability Date means the earlier of the Revolving Termination Date and one (1) Business Day prior to the date specified in clause (a) of the definition of Revolving Termination Date.

  • Utilization Percentage means, as of any day, the fraction expressed as a percentage, the numerator of which is the Facility Usage on such day, and the denominator of which is the Borrowing Base in effect on such day.

  • Ramping Capability means the sustained rate of change of generator output, in megawatts per minute.

  • Availability means, as of any date of determination, the amount that Borrowers are entitled to borrow as Advances under Section 2.1 of the Agreement (after giving effect to all then outstanding Obligations (other than Bank Product Obligations)).

  • Total Evaluated CRIS MW means the Additional CRIS MW requested plus either (i) if the Installed Capacity Supplier previously received an exemption under Sections 23.4.5.7.2(b), 23.4.5.7.6(b), 23.4.5.7.7 or 23.4.5.7.8, all prior Additional CRIS MW since the facility was last exempted under Sections 23.4.5.7.2(b), 23.4.5.7.6(b), or 23.4.5.7.8, or (ii) for all other Installed Capacity Suppliers, all MW of Capacity for which an Examined Facility obtained CRIS pursuant to the provisions in ISO OATT Sections 25, 30, or 32 (OATT Attachments S, X, or Z). For purposes of Section 23.4.5 of this Attachment H, “UCAP Offer Reference Level” shall mean a dollar value equal to the projected clearing price for each ICAP Spot Market Auction determined by the ISO on the basis of the applicable ICAP Demand Curve and the total quantity of Unforced Capacity from all Installed Capacity Suppliers in a Mitigated Capacity Zone for the period covered by the applicable ICAP Spot Market Auction. For purposes of Section 23.4.5 of this Attachment H, “Unit Net CONE” shall mean localized levelized embedded costs of a specified Installed Capacity Supplier, including interconnection costs, and for an Installed Capacity Supplier located outside a Mitigated Capacity Zone including embedded costs of transmission service, in either case net of likely projected annual Energy and Ancillary Services revenues, and revenues associated with other energy products (such as energy services and renewable energy credits, as determined by the ISO, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate. The Unit Net CONE of an Installed Capacity Supplier that has functions beyond the generation or transmission of power shall include only the embedded costs allocated to the production and transmission of power, and shall not net the revenues from functions other than the generation or transmission of power.

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.

  • Total maximum daily load or "TMDL" means the sum of the individual wasteload allocations for point sources, load allocations (LAs) for nonpoint sources, natural background loading and a margin of safety. TMDLs can be expressed in terms of either mass per time, toxicity, or other appropriate measure. The TMDL process provides for point versus nonpoint source trade-offs.

  • Availability and Reliability means the probability that a component shall be operationally ready to perform its function when called upon at any point in time.

  • Actual Minimum means, as of any date, the maximum aggregate number of shares of Common Stock then issued or potentially issuable in the future pursuant to the Transaction Documents, including any Underlying Shares issuable upon exercise in full of all Warrants, without giving effect to (x) any limits on the number of shares of Common Stock that may be owned by a Holder at any one time, or (y) any additional Underlying Shares that could be issuable as a result of any future possible adjustments made under Section 9(d).