Common use of Bending test Clause in Contracts

Bending test. 2.5.3.1. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test pressure as mentioned in paragraph 2.5.4.2. below. The test shall be performed on both new hose and after ageing according to ISO 188 as prescribed in paragraph 2.4.2.3. and subsequently to ISO 1817 as prescribed in paragraph 2.4.2.2. above.

Bending test. 2.5.3.11.5.3.1. An empty hose, at a length of approximately 3.5 m shall be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall be capable of withstanding the test pressure as mentioned in paragraph 2.5.4.21.5.4.2. below. The test shall be performed on both new hose and after ageing according to ISO 188 as prescribed in paragraph 2.4.2.31.4.2.3. and subsequently to ISO 1817 as prescribed in paragraph 2.4.2.21.4.2.2. above.

Bending test. 2.5.3.11.5.3.1. An empty hose, at a length of approximately 3.5 m shall must be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall must be capable of withstanding the test test-pressure as mentioned in paragraph 2.5.4.2. below1.5.4.2. The test shall be performed on both new hose and after ageing according to ISO 188 as prescribed in paragraph 2.4.2.31.4.2.3. and subsequently to ISO 1817 as prescribed in paragraph 2.4.2.2. above1.4.2.2.

Bending test. 2.5.3.1. An empty hose, at a length of approximately 3.5 m shall must be able to withstand 3,000 times the hereafter prescribed alternating-bending-test without breaking. After the test the hose shall must be capable of withstanding the test test-pressure as mentioned in paragraph 2.5.4.2. below. The test shall be performed on both new hose and after ageing according to ISO 188 as prescribed in paragraph 2.4.2.3. and subsequently to ISO 1817 as prescribed in paragraph 2.4.2.2. above.

Bending test. 2.5.3.11.5.4.1. An empty hose, at a length of approximately 3.5 m shall must be able to withstand 3,000 times the hereafter prescribed alternating-alternating- bending-test without breaking. After the test the hose shall must be capable of withstanding the test test-pressure as mentioned in paragraph 2.5.4.21.5.5.2. belowE/ECE/324 Rev.1/Add.66/Rev.1 Regulation No. The test shall be performed on both new hose and after ageing according to ISO 188 as prescribed in paragraph 2.4.2.367 page 66 Annex 8 1.5.4.2. and subsequently to ISO 1817 as prescribed in paragraph 2.4.2.2. above.mass propulsion mechanism