Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.64 – DEBARMENT AND SUSPENSION CERTIFICATION (3/18). Pursuant to 2 CFR 180 and 2 CFR 417, Purchaser shall certify and obtain certifications from its Subcontractors regarding debarment, suspension, ineligibility, and voluntary exclusion, including additional Subcontractors obtained after award of this contract. “Subcontractors” are participants in lower tier covered transactions. Purchaser may rely upon a certification of a prospective Subcontractor that it is not proposed for debarment under 48 CFR 9.4, debarred, suspended, ineligible, or voluntarily excluded from participating in covered transactions or timber sales, unless Purchaser knows that the certification is erroneous. Purchaser shall keep the certifications of its Subcontractors on file until timber sale Termination Date and any extensions thereof, and will provide a copy at the written request of Contracting Officer. Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to render in good faith the certification required by this Subsection. The knowledge and information of Purchaser is not required to exceed that which is normally possessed by a prudent person in the ordinary course of business dealings. If Purchaser knowingly enters into a timber sale transaction with a person who is proposed for debarment under 48 CFR 9.4, suspended, debarred, ineligible, or voluntarily excluded from participation in covered transactions or timber sales, in addition to other remedies available to the Government, Forest Service may pursue available remedies, including suspension and/or debarment. Contracting Officer shall provide a copy of Forms AD-1047 Certification Regarding Debarment, Suspension and Other Responsibility Matters – Primary Covered Transactions and AD-1048 Certification Regarding Debarment, Suspension, Ineligibility and Voluntary Exclusion – Lower Tier Covered Transactions to the Purchaser. Purchaser shall complete form AD-1047 and provide to the Contracting Officer upon request. Purchaser shall require each subcontractor to complete form AD-1048 and provide to the Contracting Officer upon request.
Dewatering (a) Where the whole of a site is so affected by surface water following a period of rain that all productive work is suspended by agreement of the Parties, then dewatering shall proceed as above with Employees so engaged being paid at penalty rates as is the case for safety rectification work. This work is typically performed by Employees engaged within CW1, CW2 or CW3 classifications. When other Employees are undertaking productive work in an area or areas not so affected then dewatering will only attract single time rates. (b) Where a part of a site is affected by surface water following a period of rain, thus rendering some areas unsafe for productive work, consistent with the Employer’s obligations under the OH&S Act, appropriate Employees shall assist in the tidying up of their own work site or area if it is so affected. Where required, appropriate Employees will be provided with the appropriate PPE. Such work to be paid at single time rates. Productive work will continue in areas not so affected. (c) To avoid any confusion any ‘dewatering’ time which prevents an Employee from being engaged in their normal productive work is not included in any calculation for the purposes of determining whether an Employee is entitled to go home due to wet weather (refer clauses 32.4 and 32.5)
Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins. (2) Maintain waterbars, drainage dips, and other water diversion measures. (3) During active use, patrol and maintain functional drainage. (4) Repair damaged culvert ends.
Bumping The employee scheduled for layoff under Section D. may elect to either accept layoff or bump in accordance with the process outlined in this Section. An employee scheduled for layoff who fails or is unable, in accordance with Section D.3., to exercise the option to bump to the least senior position shall be laid off. Within seven calendar days of receipt of notification of layoff, the employee scheduled for layoff shall notify the Employer of his/her decision to either accept layoff or bump within his/her current class series, as listed below. Alternatively, an employee may bump into the least senior position in the layoff unit in a former class series at or below any level at which the employee had satisfactorily completed the required probationary period. This alternative shall not apply to employees who were demoted from the higher paying class for disciplinary reasons or who transferred from the higher paying classification in less than satisfactory employment status. An employee seeking to bump into another position must meet all requirements in accordance with Section D.3. As a result of bumping, an employee shall not earn more than the maximum rate of the lower classification bumped into or more than the rate previously earned in a higher classification from which the employee bumped. When an employee bumps downward, he/she shall be paid at that step in the lower level pay range which credits the service in the higher level range(s) to the step at which the employee was paid when promoted from a lower level. Corrections Medical Aide Corrections Medical Officer 8 Corrections Medical Officer E9 Corrections Medical Unit Officer E10 Corrections Officer Corrections Officer 8 Corrections Officer E9 Resident Unit Officer 10 Forensic Security Aide Forensic Security Assistant 8 Forensic Security Assistant 9 Forensic Security Assistant E10 Special Alternative Incarceration Officer Special Alternative Incarceration Officer 9 Special Alternative Incarceration Officer E10 Bump process--after the parties have identified the layoff unit: 1. The Employer shall identify the vacancies and least senior employees within the layoff unit equal to the number of positions being abolished within the layoff unit. These least senior employees shall be issued layoff notices. 2. If the layoff unit contains more than one work location, employees remaining in the layoff unit who are displaced from their original work location (due to the closure, reduction consolidation, etc.), will be placed in existing vacancies or the vacated positions identified in step 1 above. Placement into these positions shall be in seniority order based on preferences provided by the employees. 3. Employees remaining in the layoff unit may request an exchange transfer (one for one transfer) with any bargaining unit member in the same classification in accordance with Article 15 Part D §A.6., either within or outside the layoff unit. Exchange transfers shall not be unreasonably denied and will be processed with the rest of the layoff unit moves, if possible. In addition, during the bump process, exchange transfers occurring within this Article shall supersede all other closer to home and seniority based transfers or recalls, as no vacancy exists. Requests for exchange transfers shall be in writing by both employees requesting to exchange. 4. The parties may reach mutual agreement to modify the process to minimize impact on affected employees as necessary.
Logging The ISP will require the maintenance of network and application logs as part of BNY Mellon’s security information and event management processes. Logs are retained in accordance with law applicable to BNY Mellon’s provision of the services as well as BNY Mellon’s applicable policies. BNY Mellon uses various tools in conjunction with such logs, which may include behavioral analytics, security monitoring case management, network traffic monitoring and analysis, IP address management and full packet capture.
Recycling If this Agreement provides for the purchase or use of goods specified in PCC 12207 (for example, certain paper products, office supplies, mulch, glass products, lubricating oils, plastic products, paint, antifreeze, tires and tire-derived products, and metal products), this section is applicable with respect to those goods. Without limiting the foregoing, if this Agreement includes (i) document printing, (ii) parts cleaning, or (iii) janitorial and building maintenance services, this section is applicable. Contractor shall use recycled products in the performance of this Agreement to the maximum extent doing so is economically feasible. Upon request, Contractor shall certify in writing under penalty of perjury, the minimum, if not exact, percentage of post consumer material as defined in the PCC 12200, in such goods regardless of whether the goods meet the requirements of PCC 12209. With respect to printer or duplication cartridges that comply with the requirements of PCC 12156(e), the certification required by this subdivision shall specify that the cartridges so comply.
Canvassing soliciting and peddling in the Building are prohibited and each tenant shall report and otherwise cooperate to prevent the same.
Blasting Blasting shall be permitted only for road construction purposes unless advance permission is obtained from Forest Service. Whenever the Industrial Fire Precaution Level is II or greater, a fire security person equipped with a long handled round point No. 0 or larger shovel and a 5 gallon backpack pump can filled with water, will stay at location of blast for 1 hour after blasting is done. Blasting may be suspended by Forest Service, in areas of high rate of spread and resistance to control. Fuses shall not be used for blasting. Explosive cords shall not be used without permission of Forest Service, which may specify conditions under which such explosives may be used and precautions to be taken.
Smoke This peril means sudden and accidental damage from smoke, including the emission or puffback of smoke, soot, fumes or vapors from a boiler, furnace or related equipment. This peril does not include loss caused by smoke from agricultural smudging or industrial operations.
Drainage ▪ Prevent silt bearing road surface and ditch runoff from delivering sediment to any streams or wetlands. ▪ Maintain rolling dips and drivable waterbars as needed to keep them functioning as intended. ▪ Maintain headwalls to the road shoulder level with material that will resist erosion. ▪ Maintain energy dissipaters at culvert outlets with non-erodible material or rock. ▪ Keep ditches, culverts, and other drainage structures clear of obstructions and functioning as intended. ▪ Inspect and clean culverts at least monthly, with additional inspections during storms and periods of high runoff. This shall be done even during periods of inactivity. ▪ Perform preventative maintenance work to safeguard against storm damage, such as blading to ensure correct runoff, ditch and culvert cleaning, and waterbar maintenance.
