Bulk Items Sample Clauses

Bulk Items. Bulk items may include, but is not limited to household refuse typically of a large or bulky nature such as: appliances, furniture, bed springs and mattresses, stoves, water heaters, trunks, toys, carpeting, large automobile components, broken concrete, building materials from household repairs, alterations, or new construction, and debris from commercial or industrial establishments.
Sample 1
AutoNDA by SimpleDocs
Bulk Items. Contractor shall collect up to one (1) bulk item per week per Residential Unit at no additional cost. Residential Units will be responsible to contact Contractor and make arrangements for collection of additional Bulk Items on an individual basis.
Sample 1
Bulk Items. The COUNTY shall be required to provide, at a reasonable rate, at least one (1) monthly pickup of furniture, appliances, carpeting/padding, and similar items, upon prior request to and direct payment to the COUNTY by the affected resident or business.
Sample 1
Bulk Items. In addition to refuse collection from carts, residents are also allowed to place out for collection one bulk item per week, which will be collected by the CONTRACTOR, at no additional cost to the residents or the VILLAGE. Bulk items are generally defined to include all residential rubbish, furniture, household fixtures, small car parts and carpeting (cut down so that one man can handle) or one additional bag of refuse. It is agreed between the parties that this service will not include the collection of any items that have been banned from disposal at sanitary landfills by local, state or federal regulations currently in effect or to be enacted during the term of this contract.
Sample 1
Bulk Items. Bulk items may include but is not limited to household waste typically of a large or bulky nature such as: furniture, bed springs, mattresses, appliances, exercise equipment, and bicycles. Items still containing freon will require an additional charge.
Sample 1

Related to Bulk Items

  • SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work. 4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work. 4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged. 4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents. 4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents. 4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof. 4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals. 4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.

  • Lost Items The Credit Union, in receiving items from you for withdrawal or deposit, acts only as your agent and reserves the right to reverse the credit for any deposited items or to charge your account for the items should they become lost in the collection process.

  • Other Items Any other items that the Bank reasonably requires.

  • Exception Items When we review and process your electronic file, we may reject any electronic image that we determine to be ineligible for the service ("Exception Item") including, without limitation, electronic images of items drawn on banks located outside the United States, items drawn on U.S. Banks in foreign currency, electronic images that are illegible (due to poor image quality or otherwise), electronic images of items previously processed, electronic images previously converted to substitute checks, and electronic images with unreadable MICR information. We will notify you of any Exception Items. You agree that if you wish to attempt to deposit any Exception Item to any of your accounts with Credit Union, you will only do so by depositing the original item on which the Exception Item is based. You acknowledge and agree that even if you do not initially identify an electronic image as an Exception Item, the substitute check created by the Credit Union there from may nevertheless be returned to Credit Union because, among other reasons, the electronic image is deemed illegible by a paying bank. Credit Union's failure to identify an Exception Item shall not preclude or limit your obligations to Credit Union.

  • Raw Materials A. Catalent shall procure Raw Materials only from vendors that are approved in writing by Palatin or otherwise qualified in accordance with the provisions of the Quality Agreement. Catalent shall be responsible for procuring Raw Materials as necessary to meet the Firm Commitment. Catalent shall not be liable for any delay in delivery of Product if (i) Catalent is unable to obtain, in a timely manner, a particular Raw Material necessary for Processing and (ii) Catalent placed orders for such Raw Materials promptly following receipt of Palatin’s Firm Commitment. In the event that any Raw Material becomes subject to purchase lead time beyond the Firm Commitment time frame, the parties will negotiate in good faith an appropriate amendment to this Agreement, including Clause 4.2. B. In certain instances, Palatin may require a specific supplier, manufacturer or vendor (“Vendor”) to be used for Raw Material. In such an event, (i) such Vendor will be identified in the Specifications and (ii) the Raw Materials from such Vendor shall be deemed Palatin-supplied Materials for purposes of this Agreement. If the cost of the Raw Material from any such Vendor (other than a Vendor specified in the Specifications as of the Effective Date) is greater than Catalent’s costs for the same raw material of equal quality from other vendors, Catalent shall add the difference between Catalent’s cost of the Raw Material and the Vendor’s cost of the Raw Material to the Unit Pricing. Palatin will be responsible for all reasonable, out-of-pocket costs incurred by Catalent associated with qualification of any such Vendor who has not been previously qualified by Catalent. C. In the event of (i) a Specification change for any reason, (ii) obsolescence of any Raw Material or (iii) termination or expiry of this Agreement, Palatin shall bear the cost of any unused Raw Materials (including packaging), so long as Catalent (a) purchased such Raw Materials in quantities consistent with Palatin’s then current Firm Commitment and any minimum purchase obligations required by the vendor and (b) used commercially reasonable efforts to mitigate such costs by using any such unused Raw Materials in the manufacture of other products.

  • Consumables During the design phase, Purchaser may participate in the selection of suppliers of consumables of the Supplier. In such case, the choice regarding the final selection of the said suppliers shall be mutually agreed between the Parties. Two suppliers shall be identified and selected for each type of consumables.

  • REPAIRED OR REPLACED PARTS / COMPONENTS Where the Contractor is required to repair, replace or substitute Product or parts or components of the Product under the Contract, the repaired, replaced or substituted Products shall be subject to all terms and conditions for new parts and components set forth in the Contract including Warranties, as set forth in the Additional Warranties Clause herein. Replaced or repaired Product or parts and components of such Product shall be new and shall, if available, be replaced by the original manufacturer’s component or part. Remanufactured parts or components meeting new Product standards may be permitted by the Commissioner or Authorized User. Before installation, all proposed substitutes for the original manufacturer’s installed parts or components must be approved by the Authorized User. The part or component shall be equal to or of better quality than the original part or component being replaced.

  • Packing Specifications 7.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • Contractor’s Equipment Payment for required equipment owned by the Construction Manager or an affiliate of the Construction Manager will be based solely on an hourly rate derived by dividing the current appropriate monthly rate by 176 hours. No payment will be made under any circumstances for repair costs, freight and transportation charges, fuel, lubricants, insurance, any other costs and expenses, or overhead and profit. Payment for such equipment made idle by delays attributable to the Government will be based on one-half the derived hourly rate under this subsection.

  • ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!