BUNDLED PRODUCTS AND SERVICES Sample Clauses

BUNDLED PRODUCTS AND SERVICES. The above asset fees cover a comprehensive bundle of products and services. The following products and services are not covered by the asset fees and will continue to be billed separately using the current rates, subject to current allowable periodic increases: * AWD License Fees * Escheatment * Programming * FANMail * Vision EXHIBIT B, p.2 Additional products and services not currently utilized would be priced separately and would be billed in addition to the asset fees. *Computer/Technical Personnel (2000 Rates): Business Analyst/Tester: Dedicated - $79,040 per year On Request - $72.80 per hour COBOL Programmer: Dedicated - $129,480 per year On Request - $100.88 per hour Workstation Programmer: Dedicated - $157,040 per year On Request - $128.96 per hour *Full Service Support (2000 Rates): Senior Staff Support - $70.00 per hour Staff Support - $50.00 per hour Clerical Support - $40.00 per hour RATE ADJUSTMENT TRIGGERS: The above asset fees would be adjusted monthly based on the following triggers: Should either "Average Assets per Account" or "Average Assets per CUSIP" decrease 10% in a given month from their baseline March through May 2000 averages, the basis point fee rates would be adjusted up using the formula: Previous Rate divided by .9. When/if a rate adjustment is made, both trigger ratios would be reset at new levels equal to 10% below their previous level. Subsequent adjustments to the rates would be triggered should these ratios decrease in additional 10% increments. Downward adjustments would be made to the rates using the same formula should the trigger ratios increase in 10% increments, but only to the extent that previous upward rate adjustments have been made. The basis point fee rates could not be adjusted below the original rates listed above. TRIGGERS: Average Assets per Account Average Assets per Cusip -------------------------- ------------------------ Bank & Thrift $ 9,733 $ 184,696,341 Prime Rate $113,660 $1,259,736,679 All Others $ 29,452 $ 63,379,993 49 EXHIBIT B, p. 3 NOTES TO THE ABOVE FEE SCHEDULE
Sample 1Sample 2Sample 3See All (11)
AutoNDA by SimpleDocs
BUNDLED PRODUCTS AND SERVICES. In the event that Licensed Products are sold, licensed, distributed or used in combination with one or more other products or services which are not Licensed Products, the Net Revenues for such combination products will be calculated on a country-by-country basis by multiplying actual net sales (calculated on the basis as if they were Net Revenues) of such combination products by the fraction A/(A+B) where A is the average invoice price, during the relevant quarterly period, of the Licensed Product when sold or licensed separately by Licensee or a Affiliate, and B is the average invoice price during such period of any other product(s) or services in the combination when sold or licensed separately by Licensee or an Affiliate. If the products or services in the combination that are not Licensed Products have not been sold or licensed separately by Licensee or a Affiliate in the relevant quarterly period, Net Revenues shall be calculated by multiplying actual net sales (calculated on a basis as if they were Net Revenues) of such combination products by the fraction A/C where A is the average invoice price, during the last quarterly period, of the Licensed Product when sold or licensed separately and C is the average invoice price of the combination product during such period. If the Licensed Product has not been sold or licensed separately by Licensee or a Affiliate in the last quarterly period, regardless whether the combination product without the Licensed Product is sold or licensed separately, Net Revenues shall be calculated as in the immediately preceding sentence except that A shall be the total manufacturing cost of Licensed Product and C shall be the total manufacturing cost of the combination.
Sample 1Sample 2See All (6)
BUNDLED PRODUCTS AND SERVICES. In the event that Licensed Products are sold, licensed, distributed or used in combination with one or more other products or services which are not Licensed Products, the Net Revenues for such combination products will be calculated on a country-by-country basis by [***]. If the products or services in the combination that are not Licensed Products have not been sold or licensed separately by Licensee, Sublicensee, or an Affiliate in the relevant quarterly period, Net Revenues shall be calculated by [***]. If the Licensed Product has not been sold or licensed separately by Licensee, Sublicensee, or an Affiliate in the last quarterly period, regardless whether the combination product without the Licensed Product is sold or licensed separately, Net Revenues shall be calculated as [***].
Sample 1
BUNDLED PRODUCTS AND SERVICES. In the event that Licensed Products are sold, licensed, distributed or used in combination with one or more other products or services which are not Licensed Products, the Net Revenues for such combination products will be calculated [**].
Sample 1

Related to BUNDLED PRODUCTS AND SERVICES

  • Other Products and Services As our customer, you have access to a suite of financial products and services availed by ourselves, our affiliates and strategic partners designed to help you address and achieve your financial needs and goals. You agree that you can obtain information about such Products and Services via our website xxx.xxxxxxxx.xxx.xx and you further agree that we can from time to time communicate information in relation to such Products or Services to you specifically or generally to all cardmembers via such communication mode as we consider appropriate.

  • Products and Services General Information

  • Third Party Products and Services Any third-party hardware, software and/or services that is delivered by ResMed for use either standalone or in conjunction with ResMed products and/or services, shall be subject to the third-party terms and conditions and/or license agreements between Customer and the third party. Such third-party hardware, software and/or services is provided by ResMed "AS IS," without any warranty of any kind. Any representations or warranties as to such hardware, software and/or services shall only be as granted by the applicable third parties, if any, that accompany such products and/or software and/or services. Any representations, warranties, or other similar obligations with respect to such third-party hardware, software and/or services flow directly from the third party to Customer and ResMed shall have no responsibility at all for any such representations, warranties, obligations or lack thereof.

  • Additional Products and Services Subject to the allocation of funds, the CPO may add similar equipment, supplies, services, or locations, within the scope of this Agreement, to the list of equipment, supplies, services, or locations to be performed or provided by giving written notification to Contractor. For purposes of this Section, the “Effective Date” means the date specified in the notification from the CPO. As of the Effective Date, each item added is subject to this Agreement, as if it had originally been a part, but the charge for each item starts to accrue only on the Effective Date. In the event the additional equipment, supplies, services, or locations are not identical to the items(s) already under this Agreement, the charges therefor will then be Contractor’s normal and customary charges or rates for the equipment, supplies, services, or locations classified in the Fees and Costs (Exhibit “F”).

  • Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.

  • Recycled Products The Contractor agrees to comply with all the requirements of Section 6002 of the Resource Conservation and Recovery Act (RCRA), as amended (42 U.S.C. 6962), including but not limited to the regulatory provisions of 40 CFR Part 247, and Executive Order 12873, as they apply to the procurement of the items designated in Subpart B of 40 CFR Part 247. References: 42 U.S.C. 6962, 40 CFR Part 247, Executive Order 12873 (More than $10,000)

  • New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Software Products Save as otherwise set forth in the Agreement, the right to use any Software Product is personal to the Licensee, for its own internal use, and is non-transferable, except with the Licensor’s prior written consent, in which case the Licensee shall cause the assignee or sub-licensee to agree to the terms of this Software License.

  • Third Party Products 12.1 Third-party products provided to you by NCR Voyix for use with your subscription to the Service are subject to any terms provided by their supplier, including but not limited to those terms and conditions set forth in the exhibits attached hereto. Third-party terms and conditions are subject to change at any time by the supplier, and you agree that your use of such third-party products and services is governed by such supplier’s terms and conditions. You hereby release NCR Voyix from any and all liability associated with any damages or claims arising out of or related to third-party products. UNLESS NCR Xxxxx SPECIFICALLY AGREES OTHERWISE IN WRITING, YOU ACKNOWLEDGE AND AGREE THAT SUCH THIRD-PARTY PRODUCTS ARE PROVIDED “AS-IS” WITHOUT A WARRANTY FROM NCR Voyix. ACCORDINGLY, NCR Voyix EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY NATURE WITH RESPECT TO ANY SUCH THIRD-PARTY PRODUCTS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD-PARTY RIGHTS. 12.2 Third-party products and services may be advertised or made available to you for purchase directly from their supplier by email or other electronic communications, including notifications made through the Service or the Account Portal. Any representations or warranties that may be provided in connection with any such third-party products or services are provided solely by their supplier. NCR Voyix will not be responsible for any of your dealings or interactions with any of those third-party suppliers.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!