Common use of Connecting Transmission Owner’s Attachment Facilities Clause in Contracts

Connecting Transmission Owner’s Attachment Facilities. The Connecting Transmission Owner’s Attachment Facilities are diagrammed in Figure A-1 of this Appendix A. 1. LIPA 8ER-Brookhaven Substation. The 69 kV interconnecting line from the 9WU-BNL substation shall be installed underground within the LIPA 8ER Brookhaven Substation. A termination structure will be provided by the Connecting Transmission Owner to allow the Developer’s contractors to terminate the new 69kV underground connecting line. a) In support of the interconnection of the Large Generating Facility to LIPA’s Electrical System, a new 69kv interconnection terminal will be required to be constructed by Connecting Transmission Owner inside the existing LIPA 8ER Brookhaven Substation. Termination structure provided by the Connecting Transmission Owner within LIPA 8ER Brookhaven Substation is 7ft north of switch 6054/ground switch structure. Developer shall hand dig cable trench from fence to the pothead structure. The Developer will direct bury the cables, install riser conduits to the structure, sealing and support bushings at the top of the conduits for the cable, terminate the cable and mount the terminator to the Connecting Transmission Owner structure and provide a jumper with a 4-hole terminal pad and terminal bolts to connect Connecting Transmission Owner bus with termination made by the Connecting Transmission Owner. Developer shall cut and patch the paved road and replace and augment the rock surfacing. b) Major Equipment -  One (1) 69 kV, 43 XX, 0000X, XXX GCB (6050)  One (1) 69 kV, 2000A Xxxxxxxxxx/Price GOD (6053)  One (1) 69 kV, 2000A, 100KA Xxxxxxxxxx/Price GOD/Gnd Sw combo (6054)  One (1) set of 69 kV, High Accuracy, 0.15 Trench metering PT’s  One (1) set of 69 kV, High Accuracy, 2.0 Thermal Rating factor and Trench metering CT’s c) Civil Work – Structures for the following  Two (2) 69kV switches  One (1) set of 69kV metering CT’s  One (1) set of 69kV metering PT’s  One (1) set of 69kV cable terminations  Six (6) single bus supports  Foundations are required for all of the new structures as well as for the new 69kV GCB.

Connecting Transmission Owner’s Attachment Facilities. The Connecting Transmission Owner’s Attachment Facilities are diagrammed in Figure A-1 of this Appendix A. 1. LIPA 8ER-Brookhaven Substation. The 69 kV interconnecting line from the 9WU-BNL substation shall be installed underground within the LIPA 8ER Brookhaven Substation. A termination structure will be provided by the Connecting Transmission Owner to allow the Developer’s contractors to terminate the new 69kV underground connecting line. a) In support of the interconnection of the Large Generating Facility to LIPA’s Electrical System, a new 69kv interconnection terminal will be required to be constructed by Connecting Transmission Owner inside the existing LIPA 8ER Brookhaven Substation. Termination structure provided by the Connecting Transmission Owner within LIPA 8ER Brookhaven Substation is 7ft north of switch 6054/ground switch structure. Developer shall hand dig cable trench from fence to the pothead structure. The Developer will direct bury the cables, install riser conduits to the structure, sealing and support bushings at the top of the conduits for the cable, terminate the cable and mount the terminator to the Connecting Transmission Owner structure and provide a jumper with a 4-hole terminal pad and terminal bolts to connect Connecting Transmission Owner bus with termination made by the Connecting Transmission Owner. Developer shall cut and patch the paved road and replace and augment the rock surfacing. b) Major Equipment -  • One (1) 69 kV, 43 XX, 0000X, XXX GCB (6050)  • One (1) 69 kV, 2000A Xxxxxxxxxx/Price GOD (6053)  • One (1) 69 kV, 2000A, 100KA Xxxxxxxxxx/Price GOD/Gnd Sw combo (6054)  • One (1) set of 69 kV, High Accuracy, 0.15 Trench metering PT’s  • One (1) set of 69 kV, High Accuracy, 2.0 Thermal Rating factor and Trench metering CT’s c) Civil Work – Structures for the following  Two (2) 69kV switches  One (1) set of 69kV metering CT’s  One (1) set of 69kV metering PT’s  One (1) set of 69kV cable terminations  Six (6) single bus supports  Foundations are required for all of the new structures as well as for the new 69kV GCB.following

Connecting Transmission Owner’s Attachment Facilities. The Connecting Transmission Owner’s Attachment Facilities are diagrammed in Figure A-1 of this Appendix A. 1. LIPA 8ER-Brookhaven Substation. The 69 kV interconnecting line from the 9WU-BNL substation shall be installed underground within the LIPA 8ER Brookhaven Substation. A termination structure will be provided by the Connecting Transmission Owner to allow the Developer’s contractors to terminate the new 69kV underground connecting line. a) In support of the interconnection of the Large Generating Facility to LIPA’s Electrical System, a new 69kv interconnection terminal will be required to be constructed by Connecting Transmission Owner inside the existing LIPA 8ER Brookhaven Substation. Termination structure provided by the Connecting Transmission Owner within LIPA 8ER Brookhaven Substation is 7ft north of switch 6054/ground switch structure. Developer shall hand dig cable trench from fence to the pothead structure. The Developer will direct bury the cables, install riser conduits to the structure, sealing and support bushings at the top of the conduits for the cable, terminate the cable and mount the terminator to the Connecting Transmission Owner structure and provide a jumper with a 4-hole terminal pad and terminal bolts to connect Connecting Transmission Owner bus with termination made by the Connecting Transmission Owner. Developer shall cut and patch the paved road and replace and augment the rock surfacing. b) Major Equipment -  One (1) 69 kV, 43 XX, 0000X, XXX GCB (6050)  • One (1) 69 kV, 2000A Xxxxxxxxxx/Price GOD (6053)  • One (1) 69 kV, 2000A, 100KA Xxxxxxxxxx/Price GOD/Gnd Sw combo (6054)  • One (1) set of 69 kV, High Accuracy, 0.15 Trench metering PT’s  • One (1) set of 69 kV, High Accuracy, 2.0 Thermal Rating factor and Trench metering CT’s c) Civil Work – Structures for the following  Two (2) 69kV switches  One (1) set of 69kV metering CT’s  One (1) set of 69kV metering PT’s  One (1) set of 69kV cable terminations  Six (6) single bus supports  Foundations are required for all of the new structures as well as for the new 69kV GCB.following

Connecting Transmission Owner’s Attachment Facilities. The Connecting Transmission Owner’s Attachment Facilities are diagrammed in Figure A-1 of this Appendix A. 1. LIPA 8ER-Brookhaven Substation. The 69 kV interconnecting line from the 9WU-BNL substation shall be installed underground within the LIPA 8ER Brookhaven Substation. A termination structure will be provided by the Connecting Transmission Owner to allow the Developer’s contractors to terminate the new 69kV underground connecting line. a) In support of the interconnection of the Large Generating Facility to LIPA’s Electrical System, a new 69kv interconnection terminal will be required to be constructed by Connecting Transmission Owner inside the existing LIPA 8ER Brookhaven Substation. Termination structure provided by the Connecting Transmission Owner within LIPA 8ER Brookhaven Substation is 7ft north of switch 6054/ground switch structure. Developer shall hand dig cable trench from fence to the pothead structure. The Developer will direct bury the cables, install riser conduits to the structure, sealing and support bushings at the top of the conduits for the cable, terminate the cable and mount the terminator to the Connecting Transmission Owner structure and provide a jumper with a 4-hole terminal pad and terminal bolts to connect Connecting Transmission Owner bus with termination made by the Connecting Transmission Owner. Developer shall cut and patch the paved road and replace and augment the rock surfacing. b) Major Equipment -  • One (1) 69 kV, 43 XXKA, 0000X2000A, XXX ABB GCB (6050)  • One (1) 69 kV, 2000A XxxxxxxxxxCleaveland/Price GOD (6053)  • One (1) 69 kV, 2000A, 100KA Xxxxxxxxxx/Price GOD/Gnd Sw combo (6054)  • One (1) set of 69 kV, High Accuracy, 0.15 Trench metering PT’s  • One (1) set of 69 kV, High Accuracy, 2.0 Thermal Rating factor and Trench metering CT’s c) Civil Work – Structures for the following  Two (2) 69kV switches  One (1) set of 69kV metering CT’s  One (1) set of 69kV metering PT’s  One (1) set of 69kV cable terminations  Six (6) single bus supports  Foundations are required for all of the new structures as well as for the new 69kV GCB.following