Customs Related Matters Sample Clauses

Customs Related Matters. Credits or benefits resulting from the Order, including trade credits, export credits, or the refund of duties (including duty drawback), taxes, or fees, belong to XXXXX. Supplier, as identified in the Purchase Order, shall provide all information and certificates (including FTA certificates and NAFTA Certificates of Origin) necessary to permit XXXXX to receive these benefits or credits. Supplier agrees to notify XXXXX of any Goods or Services which are subject to United States or any other country's import or export laws and to fulfill any customs, FTA, or NAFTA related obligations, origin marking, or labeling requirements, and local content origin requirements. Supplier shall notify XXXXX in writing of any Goods subject to U.S. export laws and regulations, including any changes to local, state or FTA or NAFTA content, which in each case are subject to XXXXX approval. Export licenses or authorizations necessary for the export of Goods are Supplier’s responsibility unless otherwise stated in the Order, in which case Supplier shall provide the information necessary to enable XXXXX to obtain the licenses or authorizations. Supplier shall promptly notify XXXXX in writing of any material or components used by Supplier in filling the Order that Supplier purchases in a country other than the country in which the Goods are delivered. Supplier shall furnish any documentation and information necessary to establish the country of origin or to comply with the applicable country’s rules of origin requirements. Supplier shall promptly advise XXXXX of any material or components imported into the country of origin and any duty included in the Goods’ purchase price. If Goods are manufactured in a country other than the country in which Goods are delivered, Supplier shall mark Goods “Made in [country of origin].” Supplier shall provide to XXXXX and the appropriate governmental agency the documentation necessary to determine the admissibility and the effect of entry of Goods into the country in which Goods are delivered. This shall include supporting documentation required by Customs and Border Protection and any other governmental agencies, including, without limitation, the United States Department of Transportation (DOT), Environmental Protection Agency (EPA), and Food and Drug Administration (FDA). Supplier warrants that any information that is supplied to XXXXX about the import or export of Goods is true and that all sales covered by the Order will be made at not less ...
AutoNDA by SimpleDocs
Customs Related Matters a. For Products that are to be imported into the United States, Seller shall comply with all applicable recommendations or requirements of the United States Bureau of Customs and Border Protection's (“US Customs”) Customs-Trade Partnership Against Terrorism (“C-TPAT”) initiative (for information go to xxxx://xxx.xxx.xxx/ and find the link to the C-TPAT section). At Constellium's or U.S. Customs' request, Seller shall certify in writing its compliance with the C-TPAT. Seller shall provide both Constellium and U.S. Customs access to Seller's facilities and to audit Seller's compliance with the foregoing. If the Products are transported via ocean carrier, Seller must also comply with U.S. Custom’s Importer Security Filing (“ISF”) and provide the necessary data to the freight forwarder selected by Constellium who will act as Constellium’s agent for filing of the ISF. All data required for the ISF must be in the freight forwarder’s possession not later than twenty four (24) hours before the Products are loaded onto the ocean carrier or such earlier time as the freight forwarder may require. Neither Constellium nor its agents will be responsible for modifying ISFs after the Products is loaded onto the ship. Constellium may disallow the shipment of any Products if U.S. Customs issues any response other than accepted. b. Export licenses or authorizations necessary for the export of Products and related information (including deemed exports thereof) are Seller’s responsibility unless otherwise stated in the Purchase Order, in which case Seller will provide the information necessary to enable Constellium to obtain the licenses or authorizations. Seller will promptly notify Constellium in writing of any material or components used by Seller in filling the Purchase Order that Seller purchases in a country other than the country in which the Products are delivered. Seller will furnish any documentation and information necessary to establish the country of origin or to comply with the applicable country’s rules of origin requirements. Seller will promptly advise Constellium of any material or components imported into the country of origin and any duty included in the Products’ purchase price. If Products are manufactured in a country other than the country in which Products are delivered, Seller will xxxx Products “Made in [country of origin].” Seller will provide to Constellium and the appropriate governmental agency the documentation necessary to determine the admissi...

Related to Customs Related Matters

  • Related Matters Notwithstanding anything herein to the contrary, additional conditions or restrictions related to such Options may be contained in the Plan or the resolutions of the Plan Committee authorizing such grant of Options.

  • Definitions and Related Matters For purposes of this Agreement, the capitalized terms used herein shall have the meanings assigned to them herein or in the attached Exhibit 1 and, for purposes of this Agreement and all other documents executed in connection herewith, the rules of construction set forth in Exhibit 1 shall govern.

  • Litigation and Related Matters The commencement of, or any material development in, any action, suit, proceeding or investigation affecting the Borrower or any of its Subsidiaries or any of their respective properties before any arbitrator or Governmental Authority, (i) in which the amount involved that the Borrower reasonably determines is not covered by insurance or other indemnity arrangement is $50,000,000 or more, (ii) with respect to any Document or any material Indebtedness or preferred stock of the Borrower or any of its Subsidiaries or (iii) which, if determined adversely to the Borrower or any of its Subsidiaries, could reasonably be expected to have a Material Adverse Effect.

  • TRAINING AND RELATED MATTERS The parties recognise that in order to increase the efficiency and productivity of the company a significant commitment to structured training and skill development is required. Accordingly the parties commit themselves to: a) The parties to this Agreement recognise the importance of the apprenticeship system to the construction industry. It is agreed that every employer party to this Agreement who employs five (5) or more tradespersons in any one classification shall undertake to employ at least one (1) apprentice or make arrangements to host an apprentice from an agreed group apprenticeship scheme. Where an employer does not currently have an apprentice as per this provision, reasonable time shall be allowed to enable the employer to comply with this clause. Further, the parties are committed to a strong ratio of apprentices in the industry. Apprenticeship levels on a specific project may be discussed at the Project Pre-Commencement Conference (refer Clause 16). b) Providing employees with the opportunity to acquire additional skills within relevant career path structures through appropriate structured training based on nationally endorsed (i.e. Construction Training Australia endorsed) competency standards and curriculum; c) Actively encouraging employees to seek formal recognition of their skills (i.e. recognition of prior learning); and d) Using training providers accredited and acceptable to the parties. The CFMEU, MBAV and other employer associations are legitimately engaged in providing training to industry and it is hereby agreed that all parties will properly recognise and accept the validity of nationally accredited training as provided by the other parties. e) The parties will consult on the development of training programs which are consistent with the following: • Training provided will be consistent with the company’s business requirements, relevant to the work of the employees, consistent with the skills development of each employee and with applicable national competency standards. • Training may be taken either on or off the job with all reasonable steps being taken to conduct training in normal working hours. • If an approved training activity is undertaken during ordinary working hours, the employee/s concerned shall not suffer any loss of pay. • Approved training activities undertaken outside of ordinary hours will be paid at single time or will, at the employee’s option, be taken as time off in lieu of payment. Provided that the scheduling of time off must be consistent with the needs of the business and be by agreement with the company. • Training costs of courses approved by the company will be met by the company. • The company will not be asked to meet the costs of training undertaken by employees which was not approved by the company. • Leave of absence granted pursuant to this clause shall count as service for all purposes of the award and this agreement. • Accredited members of the union will be allowed up to 5 days per year, without loss of pay, to attend trade union educational courses conducted or approved by the union. (see appendix H) f) The parties to this Agreement recognise the importance of the role that Apprentices/Trainees fulfill within the industry and, more importantly, a role that they will fulfill as trades persons following the conclusion of the indentures. To this end the Victorian Building Industry Consultative Committee will investigate ways of enhancing employment prospects for Apprentice/Trainees. In addition it is agreed that, where appropriate, employers will use their best endeavours to employ Apprentices/Trainees in order to ensure appropriate trade persons levels for the future.

  • Liens and Related Matters A. PROHIBITION ON LIENS. Holdings shall not, and shall not permit any of its Subsidiaries to, directly or indirectly, create, incur, assume or permit to exist any Lien on or with respect to any property or asset of any kind (including any document or instrument in respect of goods or accounts receivable) of Holdings or any of its Subsidiaries, whether now owned or hereafter acquired, or any income or profits therefrom, or file or permit the filing of, or permit to remain in effect, any financing statement or other similar notice of any Lien with respect to any such property, asset, income or profits under the Uniform Commercial Code of any State or under any similar recording or notice statute, except: (i) Permitted Encumbrances; (ii) Liens granted pursuant to the Collateral Documents; (iii) Liens described in Schedule 7.2 annexed hereto; ------------ (iv) Liens securing Indebtedness permitted under subsection 7.1(vii), which Liens are existing prior to the time the entity which incurred such Indebtedness became a Subsidiary of Company; provided that such Liens were -------- not incurred in connection with, or in contemplation of, the acquisition of such Subsidiary and such Liens extend to or 133 cover only the property and assets of such entity which were covered by such Liens and which were owned by such entity, in each case at the time such entity became a Subsidiary of Company; and (v) Other Liens securing Indebtedness in an aggregate amount not to exceed $1,000,000 at any time outstanding.

  • Capitalization and Related Matters (a) The Company has an authorized capital consisting of 230,000,000,000 shares of Common Stock and 25,000,000 shares in total of Series A-2 Convertible Preferred Stock, Series D Convertible Preferred Stock, Series C Preferred Stock and collectively with the Series E Preferred Stock, “Preferred Stock”, of which 13,489,918,237 shares of Common Stock and 3,000 shares of Preferred Stock are issued and outstanding as of the date hereof (after giving effect to the transactions contemplated hereby) as set forth on Schedule 3.2(a) hereto. All of the outstanding shares of the Company’s capital stock are, and immediately after the Closing will be, validly issued and outstanding, fully paid and non-assessable. No such stock (i) was issued in violation of the preemptive rights of any shareholder or (ii) is held as treasury stock. All of the outstanding capital stock of the Company was issued in compliance with all applicable federal and state securities or “blue sky” laws and regulations. (b) Except as set forth on Schedule 3.2(b) hereto, there are no outstanding securities convertible into Common Stock or any other capital stock of the Company nor any rights to subscribe for or to purchase, or any options for the purchase of, or any agreements providing for the issuance (contingent or otherwise) of, or any calls, commitments or claims of any character relating to, such capital stock or securities convertible into such capital stock (collectively, “Securities Rights”). Except as set forth on Schedule 3.2 hereto the Company (i) is not subject to any obligation (contingent or otherwise) to repurchase or otherwise acquire or retire any of its capital stock; or (ii) has no liability for dividends or other distributions declared or accrued, but unpaid, with respect to any capital stock. (c) Except as set forth on Schedule 3.2(c) hereto, the Company is not a party to any agreement, understanding or arrangement, direct or indirect, relating to any class or series of the Company’s capital stock, including, without limitation, any voting agreement, restriction on resale, shareholder agreement or registration rights agreement.

  • Title and Related Matters IACH has good and marketable title to all of its properties, inventory, interest in properties, and assets, real and personal, which are reflected in the most recent IACH balance sheet or acquired after that date (except properties, inventory, interest in properties, and assets sold or otherwise disposed of since such date in the ordinary course of business), free and clear of all liens, pledges, charges, or encumbrances except (a) statutory liens or claims not yet delinquent; (b) such imperfections of title and easements as do not and will not materially detract from or interfere with the present or proposed use of the properties subject thereto or affected thereby or otherwise materially impair present business operations on such properties; and (c) as described in the IACH Schedules. Except as set forth in the IACH Schedules, IACH owns, free and clear of any liens, claims, encumbrances, royalty interests, or other restrictions or limitations of any nature whatsoever, any and all products it is currently manufacturing, including the underlying technology and data, and all procedures, techniques, marketing plans, business plans, methods of management, or other information utilized in connection with IACH'S business. Except as set forth in the IACH Schedules, no third party has any right to, and IACH has not received any notice of infringement of or conflict with asserted rights of others with respect to any product, technology, data, trade secrets, know-how, propriety techniques, trademarks, service marks, trade names, or copyrights which, individually or in the aggregate, if the subject of an unfavorable decision, ruling or finding, would have a materially adverse effect on the business, operations, financial condition, income, or business prospects of IACH or any material portion of its properties, assets, or rights.

  • Compensation and Related Matters During the Term of the Executive’s employment, as compensation and consideration for the performance by the Executive of the Executive’s duties, responsibilities and covenants pursuant to this Agreement, the Company shall pay the Executive and the Executive agrees to accept in full payment for such performance the amounts and benefits set forth below.

  • Press Releases and Related Matters Each Credit Party executing this Agreement agrees that neither it nor its Affiliates will in the future issue any press releases or other public disclosure using the name of GE Capital or its affiliates or referring to this Agreement, the other Loan Documents or the Related Transactions Documents without at least 2 Business Days' prior notice to GE Capital and without the prior written consent of GE Capital unless (and only to the extent that) such Credit Party or Affiliate is required to do so under law and then, in any event, such Credit Party or Affiliate will consult with GE Capital before issuing such press release or other public disclosure. Each Credit Party consents to the publication by Agent or any Lender of a tombstone or similar advertising material relating to the financing transactions contemplated by this Agreement. Agent reserves the right to provide to industry trade organizations information necessary and customary for inclusion in league table measurements.

  • The Merger and Related Matters 4 Section 2.01. Certificate of Merger.................................................4 Section 2.02. The Effective Time....................................................4 Section 2.03. Certain Effects of the Merger.........................................4 Section 2.04. Effect of the Merger on Capital Stock.................................5 Section 2.05. Delivery, Exchange and Payment........................................6 Section 2.06. Merger Consideration Calculation......................................7 Section 2.07. Fractional Shares.....................................................7

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!