Drawings, Documentation and Equipment Warranties Sample Clauses

Drawings, Documentation and Equipment Warranties. The items below are required components of the Acceptance Test and must be satisfied for successful completion of this Test.
AutoNDA by SimpleDocs
Drawings, Documentation and Equipment Warranties. The items below are required components of the Acceptance Test and must be satisfied for successful completion of this Test. (A) Electronic and three (3) hard copies of all Switchyard construction drawings, specifications, calibrations, and settings including as-built drawings. (B) Equipment operating and maintenance manuals, spare parts lists, commissioning notes, as-built equipment settings, and other information related to the switchyard equipment. (C) Contractor construction warranties and equipment warranties. (D) Phase rotation testing to verify proper phase connections. (E) Switching Station inspections – The Switching Station may be inspected to test and ensure that the equipment that Seller has installed is installed and operating correctly based upon agreed‑to design. Wiring may be field verified on a sample basis against the wiring diagrams to ensure that the installed equipment is wired properly. The grounding mat at the Switching Station may be tested to make sure there is adequate grounding of equipment. (F) If agreed by the Parties in writing, some requirements may be postponed to the Control Systems Acceptance Test. ATTACHMENT O CONTROL SYSTEM ACCEPTANCE TEST CRITERIA a. The Acceptance Test for the Facility will be conducted, following installation of the Facility. The Acceptance Test procedures will be in accordance with criteria set forth herein. The Acceptance Test shall be performed in accordance with Good Engineering and Operating Practices and demonstrate to Company’s satisfaction that the Facility and the interconnection portion of the Facility, including Company-Owned Interconnection Facilities, have met the provisions of Article 8 (Company Dispatch) and Section 3 (Performance Standards) of Attachment B (Facility Owned by Seller). b. Acceptance Test procedures will be developed by Company for the Seller's review at least sixty (60) Days in advance of performing the tests based on the date provided by Company. c. The procedures will include, but not be limited to, demonstration of the functional requirements of the Facility defined in Article 8 (Company Dispatch) and Section 3 (Performance Standards) of Attachment B (Facility Owned by Seller) such as, but not limited to: i. Interconnection equipment and communications to support remote monitoring of the Facility and control of Facility breakers ii. Droop characteristic and change of frequency control / response modes (if applicable) iii. Real power delivery under remote Company Dispa...

Related to Drawings, Documentation and Equipment Warranties

  • Manufacturer’s Warranties If a Lease Vehicle is covered by a Manufacturer’s warranty, the Lessee, during the Vehicle Term for such Lease Vehicle, shall have the right to make any claims under such warranty that the Lessor could make.

  • Client Warranties a) Client shall fully brief Oracle as to its requirements or objectives prior to entering into the Agreement and shall keep Oracle so briefed during the term of the Agreement. b) Client shall cooperate with Oracle in all matters relating to the Services and shall, at its own expense, supply Oracle with all materials and data reasonably requested by Oracle from time to time for the proper provision of the Services. c) Client shall respond promptly to any request by Oracle for materials or approval and within any deadline reasonably required by Oracle to provide the Services.

  • ACCURACY OF REPRESENTATIONS AND WARRANTIES AND COMPLIANCE WITH OBLIGATIONS The representations and warranties of Purchaser contained in this Agreement shall be true and correct in all material respects at and as of the Closing Date with the same force and effect as though made at and as of that time except: (i) for changes specifically permitted by or disclosed pursuant to this Agreement; and (ii) that those representations and warranties which address matters only as of a particular date shall remain true and correct as of such date. Purchaser shall have performed and complied in all material respects with all of its obligations required by this Agreement to be performed or complied with at or prior to the Closing Date. Purchaser shall have delivered to the Sellers a certificate, dated as of the Closing Date, and signed by an executive officer thereof, certifying that such representations and warranties are true and correct, and that all such obligations have been performed and complied with, in all material respects.

  • Service Warranties Contractor warrants that: (i) the Services will be rendered with promptness and diligence and will be executed in a workmanlike manner, in accordance with the practices and professional standards used in well-managed operations performing services similar to the Services; and (ii) Contractor will perform the Services in the most cost-effective manner consistent with the required level of quality and performance. Contractor warrants that each Deliverable will conform to and perform in accordance with the requirements of this Agreement and all applicable specifications and documentation. For each such Deliverable, the foregoing warranty shall commence for such Deliverable upon the JBE’s acceptance of such Deliverable, and shall continue for a period of one (1) year following acceptance. In the event any Deliverable does not to conform to the foregoing warranty, Contractor shall promptly correct all nonconformities to the satisfaction of the JBE.

  • Equipment Warranty Sunrun warrants all equipment for the duration of the Initial Term. If parts fail during the term of this Agreement, Sunrun will use commercially reasonable efforts to replace them with like equipment; however, you acknowledge that due to parts availability and other factors, this may not be possible. Sunrun agrees that any change in equipment will not reduce the Guaranteed Output set forth in Section D.

  • Limited Warranties State Street represents and warrants that it is the owner of and has the right to grant access to the System and to provide the Remote Access Services contemplated herein. Because of the nature of computer information technology including, but not limited to, the use of the Internet, and the necessity of relying upon third party sources, and data and pricing information obtained from third parties, the System and Remote Access Services are provided “AS IS”, and the Customer and its Authorized Designees shall be solely responsible for the investment decisions, results obtained, regulatory reports and statements produced using the Remote Access Services. State Street and its relevant licensors will not be liable to the Customer or its Authorized Designees for any direct or indirect, special, incidental, punitive or consequential damages arising out of or in any way connected with the System or the Remote Access Services, nor shall either party be responsible for delays or nonperformance under this Addendum arising out of any cause or event beyond such party’s control. State Street will take reasonable steps to ensure that its products (and those of its third-party suppliers) reflect the available state of the art technology to offer products that are Year 2000 compliant, including, but not limited to, century recognition of dates, calculations that correctly compute same century and multi century formulas and date values, and interface values that reflect the date issues arising between now and the next one-hundred years, and if any changes are required, State Street will make the changes to its products at no cost to you and in a commercially reasonable time frame and will require third-party suppliers to do likewise. The Customer will do likewise for its systems. EXCEPT AS EXPRESSLY SET FORTH IN THIS ADDENDUM, STATE STREET, FOR ITSELF AND ITS RELEVANT LICENSORS, EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES CONCERNING THE SYSTEM AND THE SERVICES TO BE RENDERED HEREUNDER, WHETHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE. State Street will defend or, at our option, settle any claim or action brought against the Customer to the extent that it is based upon an assertion that access to the System or use of the Remote Access Services by the Customer under this Addendum constitutes direct infringement of any patent or copyright or misappropriation of a trade secret, provided that the Customer notifies State Street promptly in writing of any such claim or proceeding and cooperates with State Street in the defense of such claim or proceeding. Should the System or the Remote Access Services or any part thereof become, or in State Street’s opinion be likely to become, the subject of a claim of infringement or the like under any applicable patent or copyright or trade secret laws, State Street shall have the right, at State Street’s sole option, to (i) procure for the Customer the right to continue using the System or the Remote Access Services, (ii) replace or modify the System or the Remote Access Services so that the System or the Remote Access Services becomes noninfringing, or (iii) terminate this Addendum without further obligation.

  • Representations, Warranties and Agreements of the Trust The Trust represents, warrants and agrees that: (a) The Adviser and the Sub-Adviser each has been duly appointed by the Board of Trustees of the Trust to provide investment services to the Fund Account as contemplated hereby. (b) The Trust will cause the Adviser to deliver to the Sub-Adviser a true and complete copy of the Fund’s Registration Statement as effective from time to time, and such other documents or instruments governing the investment of the Fund Account and such other information as reasonably requested by the Sub-Adviser, as is necessary for the Sub-Adviser to carry out its obligations under this Contract.

  • Contractor Representations and Warranties Contractor makes each of the following representations and warranties as of the effective date of this Contract and at the time any order is placed pursuant to this Contract. If, at the time of any such order, Contractor cannot make such representations and warranties, Contractor shall not process any orders and shall, within three (3) business days notify Enterprise Services, in writing, of such breach.

  • Vendor’s Specific Warranties, Terms, and License Agreements Because TIPS serves public entities and non-profits throughout the nation all of which are subject to specific laws and policies of their jurisdiction, as a matter of standard practice, TIPS does not typically accept a Vendor’s specific “Sale Terms” (warranties, license agreements, master agreements, terms and conditions, etc.) on behalf of all TIPS Members. TIPS may permit Vendor to attach those to this Agreement to display to interested customers what terms may apply to their Supplemental Agreement with Vendor (if submitted by Vendor for that purpose). However, unless this term of the Agreement is negotiated and modified to state otherwise, those specific Sale Terms are not accepted by TIPS on behalf of all TIPS Members and each Member may choose whether to accept, negotiate, or reject those specific Sale Terms, which must be reflected in a separate agreement between Vendor and the Member in order to be effective.

  • Representations, Warranties and Agreements of Seller The Seller agrees and acknowledges that it shall, as a condition to the consummation of the transactions contemplated hereby, make the representations and warranties specified in Section 3.01 and 3.02 of the Seller's Warranties and Servicing Agreement, as of the Closing Date. The meaning of the term "Agreement" as used in Sections 3.01 and 3.02 of the Seller's Warranties and Servicing Agreement shall include this Agreement. The Seller, without conceding that the Mortgage Loans are securities, hereby makes the following additional representations, warranties and agreements which shall be deemed to have been made as of the Closing Date: a) neither the Seller nor anyone acting on its behalf has offered, transferred, pledged, sold or otherwise disposed of any Mortgage Loans, any interest in any Mortgage Loans or any other similar security to, or solicited any offer to buy or accept a transfer, pledge or other disposition of any Mortgage Loans, any interest in any Mortgage Loans or any other similar security from, or otherwise approached or negotiated with respect to any Mortgage Loans, any interest in any Mortgage Loans or any other similar security with, any person in any manner, or made any general solicitation by means of general advertising or in any other manner, or taken any other action which would constitute a distribution of the Mortgage Loans under the Securities Act of 1933 (the "1933 Act") or which would render the disposition of any Mortgage Loans a violation of Section 5 of the 1933 Act or require registration pursuant thereto, nor will it act, nor has it authorized or will it authorize any person to act, in such manner with respect to the Mortgage Loans; and b) the Seller has not dealt with any broker or agent or anyone else who might be entitled to a fee or commission in connection with this transaction other than the Purchaser.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!