Drill hole Information. A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole o down hole length and interception depth o hole length. • If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of Refer to Table 1 in announcement Drilling by Cominco in the 1980’s shows significant mineralized intercepts in a number of holes drilled at or near the gossan outcrop. PR-2 intercepted chlorite-rich rock that contains the best metal concentrations to date, and possible the best base metal intercept ever drilled in the Xxxxxxxx Formation and perhaps the entire Belt system outside of the Xxxxxxxx Mine area. This zone, at 74m depth, contains 13.1m of semi-massive sulphide with 6% Zn and 0.2% Pb, within with 5m of 9% Zn were intersected. At Criteria JORC Code explanation Commentary the report, the Competent Person should clearly explain why this is the case. shallower depths of 24.3m, PR-2 encountered 27.1m of 2.8% Zn. Subsequently, additional drilling from Xxxxxx Dodge intercepted significant Zn and Pb mineralization in a drill hole collared near the Xxxxxx Ridge gossan knob outcrop. Drill hole PPR-95-09 encountered 25m of 3.1% Zn at 25m depth within a larger, 114m zone of mineralization that contained narrow intervals of up to 8% Zn. Data aggregation methods • In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated. • Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. • The assumptions used for any reporting of metal equivalent values should be clearly stated. All historical reports are within MOA’s possession including drill hole logs and geochemical data. Reported historical intercepts have been calculated for Zn only at a 1% cut-off and allowing for up to 2m of internal dilution of low grade material >0.3%. No new exploration results are reported here. Relationship • These...
Drill hole Information. A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole o down hole length and interception depth o hole length. • If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. All drillhole data used in the 2016 Mineral Resource estimate has previously been reported as exploration data and is in a digital database format. No new drilling information has been added to the project since the Terra Search 2015 estimate. Data aggregation methods • In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated. • Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. • The assumptions used for any reporting of metal equivalent values No exploration results are being reported as part of this Mineral Resource report.
Drill hole Information. A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole o down hole length and interception depth o hole length. • If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. No drill hole data. Samples are rock chip samples and are located appropriately on plans within announcement.
Drill hole Information. A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole o down hole length and interception depth o hole length. • If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. • Not Applicable – all available historical exploration data currently available on open file that pertains to these tenements has been reviewed and it is concluded the land package has not been adequately explored or drill tested. • As the majority of the ground is still under application Tychean is negotiating land access and compensation agreements with the traditional owners of the land. Data aggregation methods • In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated. • Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. • The assumptions used for any reporting of metal equivalent values should be clearly stated. • Not Applicable Relationship • These relationships are particularly • Not Applicable n widths and • If the geometry of the mineralisation lengths known, its nature should be reported. • If it is not known and only the down Diagrams • Appropriate maps and sections (with • A plan view is provided in this report to enable scales) and tabulations of intercepts the reader to see the relationship between the should be included for any significant interpreted structures and the available land discovery being reported These package should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views. Balanced • Where comprehensive reporting of all • Not Applicable reporting Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Resu...
Drill hole Information. A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole o down hole length and interception depth • Exploration results are not being reported.
Drill hole Information. A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level − o elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole o down hole length and interception depth o hole length. If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. Summary tables and detailed maps have been presented in Figures 3 to 5 and Tables 2 to 4 Easting and Northing coordinates are all referenced to Geodetic Datum of Australia 94 (GDA94), Map Grid of Australia (MGA) projection, Zone 50. Collar positions were supplied in MGA94 Zone 55 co-ordinate system to conform to the Government LIDAR topographic data. Collar elevations were derived by pressing the collars to the digital terrain model (DTM). Downhole dips of -700 to -900 at an azimuth of 00 to 2350 were used. Data aggregation methods In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (e.g., cutting of high grades) and cut-off grades are usually Material and should be stated. Where aggregate intercepts incorporate short lengths of high-grade results and longer lengths of low-grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. The assumptions used for any reporting of metal equivalent values should be clearly stated. Exploration results are classified as raw assays with no cuts or adjustment been made. Not applicable, as a Mineral Resource is being reported. Metal equivalent values have not been used. The sampling is unknown to be considered representative of the mineralised zones.
Drill hole Information. A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole o down hole length and interception depth o hole length. • If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. • All data is previous. • Water bore information is tabulated in the body of the announcement.
