EEO Provisions During the performance of this Contract the Contractor agrees as follows: (1) The Contractor shall not discriminate against any employee or applicant for employment because of race, color, religion, sex, national origin, political affiliation or belief, age, or handicap. The Contractor shall take affirmative action to insure that applicants are employed and that employees are treated equally during employment, without regard to race, color, religion, sex, national origin, political affiliation or belief, age, or handicap. Such action shall include but not be limited to the following: employment, upgrading, demotion, transfer, recruitment or advertising, layoff or termination, rates of pay or other forms of compensation, and selection for training, including apprenticeship. The Contractor shall post in conspicuous places, available to employees and applicants for employment, notices setting forth these EEO provisions. (2) The Contractor shall in all solicitations or advertisement for employees placed by or on behalf of the Contractor, state that all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, political affiliation or belief, age, or handicap. (3) The Contractor shall send a copy of the EEO provisions to each labor union or representative of workers with which it has a collective bargaining agreement or other contract or understanding. (4) In the event of the Contractor's noncompliance with these EEO provisions, the City may cancel, terminate, or suspend this contract, in whole or in part, and the City may declare the Contractor ineligible for further City contracts. (5) Unless exempted by the City Council of the City of Durham, the Contractor shall include these EEO provisions in every purchase order for goods to be used in performing this contract and in every subcontract related to this contract so that these EEO provisions will be binding upon such subcontractors and vendors.
Amendments to Servicing Agreements, Modification of Standard Provisions (a) Subject to the prior written consent of the Trustee pursuant to Section 3.07(b), the Master Servicer from time to time may, to the extent permitted by the applicable Servicing Agreement, make such modifications and amendments to such Servicing Agreement as the Master Servicer deems necessary or appropriate to confirm or carry out more fully the intent and purpose of such Servicing Agreement and the duties, responsibilities and obligations to be performed by the Servicer thereunder. Such modifications may only be made if they are consistent with the REMIC Provisions, as evidenced by an Opinion of Counsel. Prior to the issuance of any modification or amendment, the Master Servicer shall deliver to the Trustee such Opinion of Counsel and an Officer's Certificate setting forth (i) the provision that is to be modified or amended, (ii) the modification or amendment that the Master Servicer desires to issue and (iii) the reason or reasons for such proposed amendment or modification. (b) The Trustee shall consent to any amendment or supplement to a Servicing Agreement proposed by the Master Servicer pursuant to Section 3.07(a), which consent and amendment shall not require the consent of any Certificateholder if it is (i) for the purpose of curing any mistake or ambiguity or to further effect or protect the rights of the Certificateholders or (ii) for any other purpose, provided such amendment or supplement for such other purpose cannot reasonably be expected to adversely affect Certificateholders. The lack of reasonable expectation of an adverse effect on Certificateholders may be established through the delivery to the Trustee of (i) an Opinion of Counsel to such effect or (ii) written notification from each Rating Agency to the effect that such amendment or supplement will not result in reduction of the current rating assigned by that Rating Agency to the Certificates. Notwithstanding the two immediately preceding sentences, the Trustee may, in its discretion, decline to enter into or consent to any such supplement or amendment if its own rights, duties or immunities shall be adversely affected. (i) Notwithstanding anything to the contrary in this Section 3.07, the Master Servicer from time to time may, without the consent of any Certificateholder or the Trustee, enter into an amendment (A) to an Other Servicing Agreement for the purpose of (i) eliminating or reducing Month End Interest and (ii) providing for the remittance of Full Unscheduled Principal Receipts by the applicable Servicer to the Master Servicer not later than the 24th day of each month (or if such day is not a Business Day, on the previous Business Day) or (B) to the WFHM Servicing Agreement for the purpose of changing the applicable Remittance Date to the 18th day of each month (or if such day is not a Business Day, on the previous Business Day). (ii) The Master Servicer may direct WFHM to enter into an amendment to the WFHM Servicing Agreement for the purposes described in Sections 3.07(c)(i)(B) and 10.01(b)(iii).
Penalty Provisions Failure to comply with the regulatory requirements is a violation of state law that may result in penalties up to ten thousand dollars ($10,000.00 USD) for strict liability violations, for each day in which the violation occurs. (Cal. Code Regs., tit. 13, § 2299.2; Cal. Code Regs., tit. 17, § 93118.2; Health & Saf. Code §§ 39674, 39675, 42400 et seq., 42402 et seq., and 42410.)
Lock-Up Provisions (a) The Subject Party hereby agrees not to, during the period commencing from the Closing and ending on the earliest of (x) six (6) months after the date of the Closing and (y) the date after the Closing on which the Purchaser consummates a liquidation, merger, capital stock exchange, reorganization, or other similar transaction with an unaffiliated third party that results in all of the Purchaser’s stockholders having the right to exchange their shares of the Purchaser Common Stock for cash, securities, or other property (the “Lock-Up Period”): (i) lend, offer, pledge, hypothecate, encumber, donate, assign, sell, contract to sell, sell any option or contract to purchase, purchase any option or contract to sell, grant any option, right or warrant to purchase, or otherwise transfer or dispose of, directly or indirectly, any Restricted Securities, (ii) enter into any swap or other arrangement that transfers to another, in whole or in part, any of the economic consequences of ownership of the Restricted Securities, or (iii) publicly disclose the intention to do any of the foregoing, whether any such transaction described in clauses (i), (ii), or (iii) above is to be settled by delivery of Restricted Securities or other securities, in cash or otherwise (any of the foregoing described in clauses (i), (ii), or (iii), a “Prohibited Transfer”). (b) The foregoing shall not apply to the transfer of any or all of the Restricted Securities (I) to any Permitted Transferee or (II) pursuant to a court order or settlement agreement related to the distribution of assets in connection with the dissolution of marriage or civil union; provided, however, that in either of cases (I) or (II), it shall be a condition to such transfer that such transfer complies with the Securities Act of 1933, as amended, and other applicable law, and that the transferee executes and delivers to the Purchaser an agreement stating that the transferee is receiving and holding the Restricted Securities subject to the provisions of this Agreement applicable to the Subject Party, and there shall be no further transfer of such Restricted Securities except in accordance with this Agreement. As used in this Agreement, the term “Permitted Transferee” shall mean: (1) the members of the Subject Party’s immediate family (for purposes of this Agreement, “immediate family” shall mean with respect to any natural person, any of the following: such person’s spouse or domestic partner, the siblings of such person and his or her spouse or domestic partner, and the direct descendants and ascendants (including adopted and step children and parents) of such person and his or her spouses or domestic partners and siblings), (2) any trust for the direct or indirect benefit of the Subject Party or the immediate family of the Subject Party, (3) if the Subject Party is a trust, to the trustor or beneficiary of such trust or to the estate of a beneficiary of such trust, (4) in the case of an entity, officers, directors, general partners, limited partners, members, or stockholders of such entity that receive such transfer as a distribution, or related investment funds or vehicles controlled or managed by such persons or their respective affiliates, (5) to any affiliate of the Subject Party, and (6) any transferee whereby there is no change in beneficial ownership. The Subject Party further agrees to execute such agreements as may be reasonably requested by the Purchaser that are consistent with the foregoing or that are necessary to give further effect thereto.
Mortgage Provisions The Mortgage Loan documents for each Mortgage Loan, together with applicable state law, contain provisions that render the rights and remedies of the holder thereof adequate for the practical realization against the Mortgaged Property of the principal benefits of the security intended to be provided thereby, including realization by judicial or, if applicable, non-judicial foreclosure subject to the limitations set forth in the Standard Qualifications.
Final Provisions Clause 16
Remaining Provisions Except as expressly modified by this Amendment, the Employment Agreement shall remain in full force and effect. This Amendment embodies the entire agreement and understanding of the parties hereto with respect to the subject matter hereof, and supersedes all prior and contemporaneous agreements and understandings, oral or written, relative thereto.
SAVINGS PROVISIONS If any provisions of this Agreement are held to be contrary to law by a court of competent jurisdiction, such provisions will not be deemed valid and subsisting except to the extent permitted by law, but all other provisions will continue in full force and effect.
Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments. 24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation. 24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments. 24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation. 24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation. 24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments. 24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation. 24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.
BASIC PROVISIONS A. Employer's Name: [....] Address: [....] B. The Employer is a ( ) corporation; ( ) S Corporation; ( ) partnership; ( ) sole proprietor; ( ) other: [.....] C. Employer's Tax ID Number: