Inspection Period Purchaser shall have a period of time commencing on the Effective Date and expiring at 5:00 p.m., Dallas, Texas time on June 17, 1998 (the "Inspection Period") within which to examine the Property and to conduct its feasibility study thereof. Seller agrees that, during the Inspection Period, Seller will allow Purchaser and Purchaser's agents access to the Property during normal business hours to conduct soil and engineering, hazardous waste, marketing, feasibility, zoning and other studies or tests and to otherwise determine the feasibility of the Property for Purchaser's intended use; provided, however, that prior to conducting any invasive testing with respect to the Land or Improvements, or any tests or studies which could cause any damage to the Land or Improvements, Purchaser must advise Seller in writing (which notice shall state in reasonable detail the nature and extent of such proposed testing) of its intent to conduct such tests or studies and Seller may, in its reasonable discretion, refuse to approve any such tests or studies, in which event Purchaser's sole remedy shall be to terminate this Contract pursuant to Section 5.2 hereof and receive a refund of the Xxxxxxx Money Deposit, all as provided in said Section 5.2. Seller agrees that, during the Inspection Period, Seller will allow Purchaser and Purchaser's agents to conduct interviews with the Tenants set forth on Schedule 5.1 attached hereto and made a part hereof, and with those certain Tenants which Purchaser notifies Seller in writing during the Inspection Period that Purchaser desires to conduct interviews and which Seller consents to, which consent shall not be unreasonably withheld, provided that such interviews shall take place during normal business hours after reasonable notice (which may be by telephone) to Seller, and such interviews shall be conducted only in the presence of one of Seller's representatives. Not withstanding the foregoing, (a) the costs and expenses of Purchaser's investigation shall be borne solely by Purchaser, (b) prior to the expiration of the Inspection Period, Purchaser shall restore the Property to the condition which existed prior to Purchaser's entry thereon and investigation thereof to the extent the condition of the Property was affected by or as a result of the actions of Purchaser or its agents, contractors or representatives, (c) Purchaser shall not, in Seller's reasonable opinion, materially interfere, interrupt or disrupt the operation of Seller's business on the Property and, further, such access by Purchaser and/or its agents shall be subject to the rights of Tenants under Tenant Leases, (d) in the event the transaction contemplated by this Contract does not close for any reason, Purchaser shall deliver to Seller a descriptive listing of all tests, reports and inspections conducted by Purchaser with respect to the Property and deliver copies thereof to Seller (excluding, however, any proprietary development or marketing materials), (e) Purchaser shall not permit any mechanic's or materialman's liens or any other liens to attach to the Property by reason of the performance of any work or the purchase of any materials by Purchaser or any other party on Purchaser's behalf in connection with any studies or tests conducted pursuant to this Section 5.1, (f) Purchaser shall give notice (which may be by telephone) to Seller a reasonable time prior to entry onto the Property and shall permit Seller to have a representative present during all investigations and inspections conducted with respect to the Property, and (g) Purchaser shall take all reasonable actions and implement all protections necessary to ensure that all actions taken in connection with the investigations and inspections of the Property, and all equipment, materials and substances generated, used or brought onto the Property pose no material threat to the safety of persons or the environment and cause no damage to the Property or other property of Seller or other persons. All information made available by Seller to Purchaser in accordance with this Contract or obtained by Purchaser in the course of its investigations shall be treated as confidential information by Purchaser, and, prior to the purchase of the Property by Purchaser, Purchaser shall use its best efforts to prevent its agents and employees from divulging such information to any third parties except (i) as reasonably necessary to third parties engaged by Purchaser for the limited purpose of analyzing and investigating such information for the purpose of consummating the transaction contemplated by this Contract, including Purchaser's attorneys and representatives, prospective lenders and engineers or (ii) as may required by applicable law, unless such information is generally available to the public or is disclosed by a party other than Purchaser or its agents. Purchaser shall indemnify, defend and hold Seller harmless for, from and against any and all claims, liabilities, causes of action, damages, liens, losses, costs and expenses (including, without limitation, reasonable attorneys' fees) incident to, resulting from or in any way arising out of any of Purchaser's and its agents', contractors' and representatives' activities on the Property, including, without limitation, any tests or inspections conducted by Purchaser or its agents, contractors or representatives on the Property. The agreements contained in this Section 5.1 shall survive the Closing and not be merged therein and shall also survive any termination of this Contract.
Move-in; Inspection; Delay Before Resident may access or occupy the premises, any required installments or other payments then due (including any Administrative Fee, which is earned and payable upon mutual execution of this Agreement) must be paid in full with cleared funds and guaranty or prepayment requirements satisfied. The application fee (if any) is non-refundable and is not applicable toward any other payments required of Resident under this Agreement. Prior to Resident’s taking possession of the assigned bedroom space (and any re-assigned bedroom space), Resident will conduct an inspection of the assigned bedroom space and apartment and will note on the Check-In/Check-Out Inspection Report (“Inspection Report”) any defects, damage or other conditions observed, if not already identified by Owner on such report; upon completion and approval by Owner, the Inspection Report will become part of this Agreement. At the time of move-out, Resident is encouraged to inspect the bedroom space and apartment with Owner’s representative by making an appointment during business hours at least 48 hours in advance. Within three business days following Resident’s move-out (or, as applicable, following the move-out of all residents of an apartment) at the termination of this Agreement, or within a reasonable time if Resident moves out without notifying Owner, Owner will note the then-present condition of the assigned bedroom space and apartment, including all appliances and fixtures, and any damages incurred and/or extraordinary cleaning deemed necessary by Owner or extraordinary wear as determined by Owner. Resident will promptly pay all costs of restoring the bedroom space and apartment to the same condition upon move-in, less normal wear. Resident acknowledges that except as provided in the Inspection Report, each bedroom space and apartment are being delivered in "as-is" condition, and Resident’s acceptance of the assigned bedroom space and apartment at the beginning of the Term constitutes Resident’s acknowledgment that the bedroom space and apartment and all fixtures are in good repair and condition. Owner will not be responsible for any damages or consequences suffered by Resident as a result of Owner’s inability to timely deliver possession of the apartment or assigned bedroom space to Resident on the anticipated Start Date; in such event, the rent payable will be abated until Owner tenders possession and such delay will not extend or decrease the term or change the End Date. Resident acknowledges that any model apartment at the Property shown to Resident in person, online or through other means is intended to be representative of the general quality and type of construction and materials within apartments. Specific items of décor and furnishings and the actual colors, styles, materials, upholstery and other treatments in the apartment assigned to Resident may vary from those in the model apartment. The actual apartment assigned to Resident may also vary in approximate size, square footage and layout. Resident’s apartment will not include custom lighting, lamps, decorations, linens, unattached appliances or other personal property as may be shown in the model apartment.
MOVE-IN INSPECTION Before, at the time of the Tenant accepting possession, or shortly thereafter, the Landlord and Tenant: (check one) ☐ - Agree to inspect the Premises and write any present damages or needed repairs on a move-in checklist. ☐ - Shall not inspect the Premises or complete a move-in checklist.
Project Completion Date It is agreed between the Parties that the Project Completion Date is <END DATE, YEAR>. If the Project is not completed by such date then, subject to an amendment agreed to between the Parties, Alberta Innovates may elect to terminate this Investment Agreement. In such event, Alberta Innovates will notify the Applicant of its decision to terminate as soon as reasonably practical and shall advise the Applicant of the effective date of termination. Alberta Innovates will have no liability or obligation to reimburse the Applicant for any Project Costs incurred after the effective date of termination and may require the Applicant to return any portions of the Investment which were spent on Ineligible Expenses. Additionally, any portion of the Investment not used and accounted for in accordance with this Agreement as of the Project Completion Date or earlier termination is repayable by the Applicant to AI at AI’s request.
IN INSPECTION Before, at the time of the Tenant accepting possession, or shortly thereafter, the Landlord and Tenant: (check one)
SITE INSPECTION Where a site inspection is required by the Bid Specifications or Project Definition, Bidder shall be required to inspect the site, including environmental or other conditions for pre-existing deficiencies that may affect the installed Product, equipment, or environment or services to be provided and, which may affect Bidder’s ability to properly deliver, install or otherwise provide the required Product. All inquiries regarding such conditions shall be made in writing. Bidder shall be deemed to have knowledge of any deficiencies or conditions which such inspection or inquiry might have disclosed. Bidder must provide a detailed explanation with its Bid if additional work is required under this clause in order to properly complete the delivery and installation of the required Product or provide the requested service.
Completion Date The Work under this Contract shall be completed by midnight of the date required in the Contract as the Material Completion and Occupancy Date unless extended by approved requests for extension of time.
Safety Inspection During inspection of County facilities conducted by the State Division of Occupational Safety and Health for the purpose of determining compliance with the California OSHA requirements, an OCEA designated employee shall be allowed to accompany the inspector while the inspector is in the employee's agency/department. The employee so designated shall suffer no loss of pay when this function is performed during the employee's regularly scheduled work hours.
Final Completion Date Final Completion for the Work as defined in Article 6.1.3 of the General Conditions to the Continuing Contract for Construction Management shall be achieved by October 31, 2024.
Inspection/Testing In order to assess Supplier’s work quality and/or compliance with this Order, upon reasonable notice by Buyer: (a) all goods, materials and services related to the items purchased hereunder, including, raw materials, components, assemblies, work in process, tools and end products shall be subject to inspection and testing by Buyer, its customer, representative or regulatory authorities at all places, including sites where the goods are made or located or the services are performed, whether at Supplier’s premises or elsewhere; and (b) all of Supplier’s facilities, books and records relating to this Order shall be subject to inspection by Buyer or its designee. If specific Buyer and/or Buyer’s customer tests, inspection and/or witness points are included in this Order, the goods shall not be shipped without an inspector’s release or a written waiver of test/inspection/witness with respect to each such point; however, Buyer shall not be permitted to unreasonably delay shipment; and Supplier shall notify Buyer in writing at least twenty (20) days prior to each of Supplier’s scheduled final and, if applicable, intermediate test/inspection/witness points. Supplier agrees to cooperate with such/audit inspection including, completing and returning questionnaires and making available its knowledgeable representatives. Buyer’s failure to inspect or test goods, materials or services or Buyer’s failure to reject or detect defects by inspection or testing shall not relieve Supplier from its warranty obligations or any of its other obligations or responsibilities under this Order. Supplier agrees to provide small business as well as minority and/or women owned business utilization and demographic data upon request.
