Installation of the Dish Sample Clauses

Installation of the Dish. (i) The size, location, design and manner of installation of the Dish and all related wiring shall be reasonably designated and approved by Landlord. Landlord, in its reasonable discretion, may require Tenant to install screening around the Dish. After obtaining Landlord's written approval (not to be unreasonably withheld, conditioned or delayed), Tenant shall have reasonable access to the roof for installation and maintenance of the Dish and shall have the right to install all reasonable wiring related thereto. Unless otherwise approved by Landlord in writing, however, in no event shall Tenant be permitted to penetrate the roof membrane in connection with the installation or maintenance of the Dish. Tenant shall be responsible for repairing any damages caused by the installation or maintenance of the Dish. (ii) Tenant shall use the roofing company specified by Landlord to perform any work affecting the roof, provided the costs charged by such roofer are competitive with charges for similar services within the same geographic region. All cable runs, conduit and sleeving shall be installed in a good and workmanlike manner. Cables and transmission lines shall be routed and attached in accordance with current, prevailing industry practices. The Dish shall be identified with permanently marked, weather proof tags at the following locations: (A) each dish bracket; (B) at the transmission line building entry point; (C) at the interior wall feed through or any other transmission line exit point; and (D) at any transmitter combiner, duplexer, or multifed receive port. In addition, all Tenant telephone blocks, demarcs, and cables shall be clearly identified with Tenant's name, type of line, and circuit number. (iii) Tenant shall install, operate and maintain the Dish in accordance with all federal, state and local laws and regulations. Prior to installation of the Dish, Tenant shall, on behalf of the installer, provide Landlord with a certificate of insurance reasonably satisfactory to Landlord.
Sample 1Sample 2Sample 3See All (11)
AutoNDA by SimpleDocs
Installation of the Dish. (i) The size, location, design and manner of installation of the Dish and all related wiring shall be designated and approved by Landlord. After obtaining written approval of Landlord, Tenant shall have reasonable access to the roof for installation and maintenance of the Dish and shall have the right to install all reasonable wiring related thereto. However, unless otherwise approved by Landlord in writing, in no event shall Tenant be permitted to penetrate the roof membrane in connection with the installation or maintenance of the Dish. Tenant represents and warrants that the installation and maintenance of the Dish will not cause any damage to the structural portions of the Building. Tenant shall be responsible for repairing any such damage to the structure. (ii) Tenant shall use the roofing company specified by the Landlord to perform any work affecting the roof, provided the costs charged by such roofer are competitive with charges for similar services within the same geographic region. Tenant shall match as nearly as possible the color of the Dish to the existing facade of the Building. All cable runs, conduit and sleeving shall be installed in a good workmanlike manner. Cables and transmission lines shall be routed and attached in accordance with current, state of the art industry practices. The Dish shall be identified with permanently marked, weather proof tags at the following locations: (i) at each antenna bracket; (ii) at the transmission line building entry point; (iii) at the interior wall feed through or any other transmission line exit point; and (iv) at any transmitter combiner, duplexer, or multifed receive port. In addition, all Tenant telephone blocks, demarcs, and cables shall be clearly identified with the Tenant’s name, type of line, and circuit number. (iii) Tenant shall install, operate and maintain the Dish in accordance with all federal, state and local laws and regulations. Prior to installation of the Dish, Tenant shall, on behalf of the installer, provide Landlord with a certificate of insurance reasonably satisfactory to Landlord.
Sample 1
Installation of the Dish. (i) The number, size, equipment, location, design and manner of installation of the Dish and all related wiring shall be designated and approved by Landlord. After obtaining written approval of Landlord, Tenant shall have reasonable access to the roof for installation and maintenance of the Dish and shall have the right to install all reasonable wiring related thereto. However, unless otherwise approved by Landlord in writing, in no event shall Tenant be permitted to penetrate the roof membrane in connection with the installation or maintenance of the Dish. Tenant represents and warrants that the installation and maintenance of the Dish will not cause any damage to the structural portions of the Building. Tenant shall be responsible for repairing any such damage to the structure. (ii) Tenant shall use the roofing company specified by the Landlord to perform any work affecting the roof. Tenant shall match as nearly as possible the color of the Dish to the existing facade of the Building. All cable runs, conduit and sleeving shall be installed in a good workmanlike manner. Cables and transmission lines shall be routed and attached in accordance with current, state of the art industry practices. The Dish shall be identified with permanently marked, weather proof tags at the following locations: (i) at each antenna bracket; (ii) at the transmission line building entry point; (iii) at the interior wall feed through or any other transmission line exit point; and (iv) at any transmitter combiner, duplexer, or multifed receive port. In addition, all Tenant telephone blocks, demarcs, and cables shall be clearly identified with the Tenant's name, type of line, and circuit number. (iii) Tenant shall install, operate and maintain the Dish in accordance with all federal, state and local laws and regulations. Prior to installation of the Dish, Tenant shall, on behalf of the installer, provide Landlord with a certificate of insurance reasonably satisfactory to Landlord.
Sample 1
Installation of the Dish. Prior to the installation of the Dish, Landlord shall have the right to approve the type, size, height, weight and location of the Dish and the manner and method of installation and removal of the Dish and related equipment. If Landlord elects to hire structural, mechanical, roofing and/or other engineers or consultants to review such plans and specifications, Tenant shall reimburse Landlord for the reasonable costs thereof within thirty (30) days after demand from Landlord. All installations by Tenants under this Paragraph 48 shall be subject to such reasonable rules, regulations and requirements as Landlord shall implement from time to time.
Sample 1

Related to Installation of the Dish

  • Installation and Use You may install and use the Software only for the number of licenses acquired by you. In order to exercise your rights to the Software under this Agreement, you must activate your copy of the Software in the manner described during the launch sequence.

  • Installation of Equipment You represent that there are no legal, contractual or similar restrictions on the installation of the Equipment in the location(s) you have authorized. It is your responsibility to ensure compliance with all applicable building codes, zoning ordinances, homeowners’ association rules, covenants, conditions, and restrictions related to the Service, to pay any fees or other charges, and to obtain any permits or authorizations necessary for the installation or use of the Service (collectively "Legal Requirements"). You are solely responsible for any fines or similar charges for violation of any applicable Legal Requirements. You acknowledge and agree that Viasat or its designated service provider will be required to access your premises and computer to install and maintain the Equipment, including, without limitation, the antenna and its components. Standard Equipment installations performed by Viasat-authorized installers include: (i) installation of the antenna to an outside wall or sloped roof; (ii) travel to and from your Service location within 50 miles of the installer’s office; (iii) cable routed through one exterior wall and one interior wall or floor; (iv) connection of the antenna to the modem using up to 150 feet of cable; (v) connection of the modem to one computer using up to 7 feet of cable; and (vi) required mounting and cabling hardware. Any different or additional installation services or hardware are non-standard and may result in additional charges to be agreed upon between you and the installer. All installations include attaching the Equipment to your computer, installing software on your computer and configuring your computer to optimize the performance of the Internet Service. You confirm that you have reviewed the installation plan and agreed to any associated charges. If you approved a roof mount, you acknowledge the potential risks associated with this type of installation (including, without limitation, with respect to any warranty that applies to your roof or roof membrane). By signing this Agreement, scheduling one or more service or installation visits, and permitting us or our service provider to enter your home, you are authorizing Viasat and its service provider to perform all of the above actions. You are responsible for backing up the data on your computer and we highly recommend that you do so prior to permitting access to us or one of our designated service providers. NEITHER VIASAT NOR ITS SERVICE PROVIDER SHALL HAVE ANY LIABILITY WHATSOEVER FOR ANY LOSSES RESULTING FROM THE EQUIPMENT OR ANY INSTALLATION, REPAIR OR OTHER SERVICES ASSOCIATED WITH THE EQUIPMENT, INCLUDING WITHOUT LIMITATION, DAMAGE TO YOUR PREMISES OR LOSS OF SOFTWARE, DATA OR OTHER INFORMATION FROM YOUR COMPUTER. This limitation does not apply to any damages arising from the gross negligence or willful misconduct of us or one of our designated service providers. Time frames for installation, if any, are not guaranteed and may vary depending on the types of services requested and other factors.

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the equipment or parts in the required locations at no additional charge, unless otherwise specified in the Price Sheets. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the equipment or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the equipment or parts in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Installations Any special carpentry, wiring, electrical or other work, gas, steam, water and drainage connection shall be installed at Exhibitor’s expense, and in accordance with the building and Management’s direction.

  • Installation and Use Rights You may install and use any number of copies of the software on your devices.

  • Construction of the Improvements Once development of the Property has commenced, the construction of the Improvements shall be pursued with due diligence and continuity, in a good and workmanlike manner, and in accordance with sound building and engineering practices, all applicable governmental requirements, and the Development Plan. Borrower shall not permit cessation of work for a period in excess of thirty (30) days during any period of time during which development on the Property is scheduled to be performed without the prior written consent of Lender, which may be given or withheld in Lender’s sole discretion, except for delays due to strikes, riots, acts of God, war, unavailability of labor or materials, governmental laws, regulations or restrictions and Borrower shall promptly notify Lender of any such delays; provided, however, that in no event shall work cease for a period in excess of sixty (60) days regardless of the cause. Borrower shall cause all materials supplied for, or intended to be utilized in, the development of any part of the Property, but not affixed to or incorporated into the Property, to be stored on the Property or at such other location as may be approved by Lender in writing, with adequate safeguards, as required by Lender, to prevent loss, theft, damage, or commingling with other materials or projects.

  • Installation Waiver Company will waive the one-time installation charges associated with the implementation of Services within the 48 contiguous States of the U.S. provided under this Agreement except for the following services: (i) eDSL, (ii) VPN, (iii) Internet Dedicated OC3, OC12, OC48, Gig-E, (iv) PTT / third party services (including International Access and Company International), (v) Data Center, (vi) Paging, (vii) Managed Services, (viii) CPE, (ix) Enhanced Call Routing, (x) Local Disaster Recovery, (xi) Audio, Video and Net Conferencing, (xii) Voice over IP Services, (xiii) Security Services, (xiv) Non-Listing/Non-Published Service, (xv) Telecommunications Service Priority, and (xvi) Services provided by Company incumbent local exchange carriers (“ILECs”) or by Cellco Partnership and its affiliates d/b/a Company Wireless. Usage charges, monthly recurring charges, expedite charges, change charges, surcharges, charges for an unlisted or non-published number, any charges imposed by third parties (including access, egress, jack, or wiring charges), taxes or tax-like surcharges, or other Governmental Charges will not be waived.

  • Installation, Maintenance, Testing and Repair Unless otherwise agreed in writing by the Parties, to the extent required by Applicable Law, Interconnection provided by a Party shall be equal in quality to that provided by such Party to itself, any subsidiary, affiliates or third party. If either Party is unable to fulfill its obligations under this Section 14.2, it shall notify the other Party of its inability to do so and will negotiate alternative intervals in good faith. The Parties agree that to the extent required by Applicable Law, the standards to be used by a Party for isolating and clearing any disconnections and/or other outages or troubles shall be at parity with standards used by such Party with respect to itself, any subsidiary, affiliate or third party.

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • No Renovation or Installation The alteration or renovation of the Residence facilities, furniture, fixtures, or equipment supplied in the Room is not permitted. The lock(s) provided by the Institution are the only locks to be used to secure the door to the Room. No other locks may be installed by the Resident and the Resident may not change the keying of the lock(s) which are provided. Unauthorized changes to temperature settings or duct or diffuser settings in the Room, and any attempt to make changes to the heating system in the Room are prohibited. The Resident may not install any electrical equipment which will overload the capacity of a circuit. Altering or otherwise tampering with electrical systems is prohibited. The Resident may not install furnishings or equipment of any kind (including and not limited to; shelving, light fixtures, audio or visual equipment, satellite dishes and radio or television antenna(e)), without the prior written consent of the Manager. If any such furnishing or equipment is installed without the Manager’s consent, the Resident will immediately remove it after notice from the Manager, failing which the Manager may remove the furnishing or equipment at the expense of the Resident without further notice and without liability to the Resident for any damage to the furnishing or equipment so removed. The Resident is responsible to pay the costs of repairing all damage to the Room or Residence caused by the installation and removal of any furnishing or equipment installed by the Resident, whether installed with or without the Manager’s consent. The Resident also is liable for any damage to property of others and for any injury to or death of any person caused by the installation, existence or removal of any furnishing or equipment installed by the Resident, whether installed with or without the Manager’s consent.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!