IRONMONGERY. 11.1 All external doors will be fitted with a cylinder lockset with aluminium furniture as per manufacturer.
11.2 All internal doors will be fitted with a two-lever lockset with aluminium plated furniture.
11.3 Aluminium frame shower door 2,1m high will be fitted as per manufacturer.
11.4 Door handles as per sample board at contractor`s office.
11.5 Doorstops to be provided for all doors.
11.6 Aluminium weather strip to be provided at external doors.
IRONMONGERY. Ironmongery shall be as specified in the Bills of Quantities or equal and approved. Prices must include for removing and re-fixing during and after painting, labeling all keys, and for fixing to hardwood, softwood, concrete or blockwork. Catalogue references given for ironmongery are for purposes of indicating quality and size of item(s). Should the Contractor wish to substitute the specified item(s) with others of equal quality, he must inform the Project Manager and obtain approval in writing.
IRONMONGERY. The Company warrants hinge systems and handles for a period of (10) ten years to be free from functional failure provided that they are maintained in accordance to the Product Maintenance Instructions. Tarnishing is not covered by this warranty.
IRONMONGERY. The Tenderer is referred to the relevant Clauses in the separate document Model Preambles for Trades (2008 Edition)
IRONMONGERY. The Contractor must read each description throughout this bill of quantities in conjunction with and in the context of the obligations, requirements and specifications stated in the descriptions, the Model Preambles for Trades (2008 edition) and the Supplementary Preambles to the Model Preambles forming part of these Bills of Quantities. No claim arising from brevity of description of items fully described in the said Model Preambles for Trades and Supplementary Preambles to the Model Preambles will be granted.
IRONMONGERY. All doors and windows with brass / stainless steel or similar hinges and fittings. Night latch on the main door. Mortise / tubular / or similar locks on all bedroom doors.
IRONMONGERY. Diameter polished hardwood longarm 1,2m long fitted with polished brass pole hook, secured in two chromium plated spring clips screwed to and including small polished hardwood blocks plugged to wall. No 4 2 57mm Diameter approved chromium plated or plastic cupboard ventilator including forming hole through door. No 4 3 38mm Diameter rubber door stop plugged. No 4 4 100mm Steel washered brass butt hinges. No 16 5 100mm Brass butt hinge with nylon washers. No 8 6 Union CZ682-24CH/2295-76SC two lever mortice lockset or other approved. No 4 7 6 x 100mm Mild steel dowels with mortices in hardwood and concrete. No 24 Carried to Collection R Amount Quantity Rate All sign plates, and door numbers are to be with engraved blue perspex all in accordance with the standard signplates for Schools. 8 Door number with one numeral 50mm drilled and screwed to door with chromium plated dome headed screws. No 12 PINNING BOARDS, WRITING BOARDS, PROJECTION SCREENS, ETC 9 Green writing board 4800 x 1190mm high with chalk rail plugged. No 8 Carried to Collection R Amount BILL NO. 9 IRONMONGERY COLLECTION 3-24 Carried To Section Summary R Amount Quantity Rate SECTION NO. 3 CLASSROOMS BILL NO. 10 METALWORK For Trade Preambles refer to Department of Public Works 'PW 371' for Specifications and methods to be used and for the full descriptions of material and work to be done in this bill Items, materials or methods to be used specified by trade names or catalogue numbers are only an indication of the quality required. Items, materials or methods of similar quality may be used with prior approval from the Architect.
IRONMONGERY a. Door Hardware
i. External doors – as per Annexure 2.
ii. Internal doors - as per Annexure 2.
iii. Galvanized screws to be installed for locks and handles.
IRONMONGERY. Window and doors are to be fitted with the necessary locks, door closers, etc., as described and prices should include thereof. DESCRIPTIONS: Descriptions shall be deemed to include all components of the units i.e glass and glazing, ironmongery complete with security lock and latches as per manufacturer's specification, dust seals, timber fixing blocks, protection film, etc. DRAWINGS: Tenderers are referred to Architect's drawings WAN-004 and WAN-005 ALUMINIUM WINDOWS AND DOOR 2 Single door size 850 x 2125 mm high (D1). No 4 3 Double door size 1730 x 2125 mm high over (D2). No 1 Powder coated aluminium windows (colour: to Architect specification) with 6mm clear/obscured glass to SABS standards with structural silicone all round and secret fixed glazing beads on one side including ironmongery, etc fixed to brickwork as per drawing number WAN-004 & WAN-005 4 Window size 1200 x 600mm high (W1) No 2 5 Window size 1800 x 600mm high (W1) No 1 6 Window size 600 x 900mm high (W2) No 13 7 Window size 1500 x 900mm high (W3) No 1 R Carried to Collection Page 84 Section No. 2 BUILDINGS Bill No. 10 METALWORK 8 Window size 600 x 1800mm high (W4) No 11 9 Window size 1800 x 600mm high (W5) No 12 10 Window size 3600 x 600mm high (W6) No 1 11 Window size 650 x 600mm high (NC1) No 1 12 Window size 1059 x 600mm high (NC2) No 2 13 Window size 938 x 600mm high (NS99) No 1 ALUMINIUM SHOPFRONTS AND GLASS PARTITIONS 14 Shop front size 4500 x 2125mm high (W7) No 1 15 Shop front size 1190 x 2125mm high (W8) No 3 16 Shop front size 6890 x 2125mm high (W9) No 1 17 Shop front size 8706 x 2700mm high (W10) No 1 18 Shop front size 3021 x 2125mm high (W11) No 1 19 Shop front size 2710 x 2700mm high (W12) No 1 20 Shop front size 2595 x 2700mm high (W13) No 1 24 Glass partition size 1925 x 2125mm high (GP3) No 1 25 Glass partition size 2150 x2125mm high (GP4) No 1 26 Glass partition size 1950 x 2125mm high (GP5) No 1 Total Brought Forward from Page No. 82 Total Brought Forward from Page No. 83 Total Brought Forward from Page No. 84 Total Brought Forward from Page No. 85 Total Brought Forward from Page No. 86 R Item No BILL NO. 11 PLASTERING
IRONMONGERY. Ironmongery used shall satisfactorily perform the function for which it is intended. They shall be of Aluminium die cast alloy, stainless steel or other non-corrosive materials compatible with Aluminium. The Engineer shall duly approve all items of ironmongery before fixing in position. Hinges and fasteners shall be metal alloy compatible with Aluminium locks shall be mortise locks in approved quality. Plastics or synthetic rubber membrane has to be used between the glass and the frame and anywhere necessary.