Lighting Products Sample Clauses

Lighting Products. The Lighting Division offers a complete line of HID and Incandescent Floodlights, High Bay/Low Bay, RLM, Commercial and Architectural Luminaries, plus poles, brackets and ballasts. This wide choice from one source can fulfill almost every need. These various lighting products can be used for security, parking lots, building exteriors, offices, shopping centers, malls, stores, recreational and industrial areas. Ballasts for indoor and outdoor use are also listed within this index. Reelite Products. Most Reelite products cable are priced in the index less cable, and are noted by special symbol indicating where cable price may be found. It is strongly recommended that, for undivided responsibility, the cable be ordered with and installed on the reel. A complete order should include the Reelite model number, complete cable details, i.e. length, wire gauge and number of conductors, plus model numbers of ratchet or other required accessories. Each item should be individually priced from the index and shown on the order. Those Reelites, not supplied with cable are worked in the index by special symbol referring to Index Sect. RC found at the end of the index. Sect. RC provides prices (per 100 feet) for Type SO, W and G extra flexible neoprene jacketed cable, rated 600 volt, for reeling service. Listed price includes the cost of installation on the reel. Cable Outlets. Most Reelites priced in the index are furnished with either guide rails or a four-roller cable outlet as defined on the feature page for each specific product. Each feature page also lists other optional cable outlets and accessories for each specific Reelite series. Orders must include the model number and pricing of optional accessories required. Ratchets. For installations where constant cable tension is not desired, a cable locking ratchet can be supplied at additional charge. Catalog Subsections W2 and W3 contain a listing of those Reelite models where ratchet is standard or available as an option. Where optional ratchets are ordered, model number and price must be part of the order. Special Reelites. Special “SQ” Reelites are available and are quoted by the factory for those applications which are not found in the Reelite catalog section. Over fifty years of cable reel engineering and manufacturing experience provides assurance that a custom engineered Reelite can be offered by Appleton for most applications. All inquiries should be directed to Seller’s Quotation Department. Roughing-In Produc...
Sample 1Sample 2Sample 3See All (7)
AutoNDA by SimpleDocs
Lighting Products. The Lighting Division offers a complete line of HID and Incandescent Floodlights, High Bay/Low Bay, RLM, Commercial and Architectural Luminaries, plus poles, brackets and ballasts. This wide choice from one source can fulfill almost every need. These various lighting products can be used for security, parking lots, building exteriors, offices, shopping centers, malls, stores, recreational and industrial areas. Ballasts for indoor and outdoor use are also listed within this index. Reelite Products. Most Reelite products cable are priced in the index less cable, and are noted by special symbol indicating where cable price may be found. It is strongly recommended that, for undivided responsibility, the cable be ordered with and installed on the reel. A complete order should include the Reelite model number, complete cable details, i.e. length, wire gauge and number of conductors, plus model numbers of ratchet or other required accessories. Each item should be individually priced from the index and shown on the order. Those Reelites, not supplied with cable are worked in the index by special symbol referring to Index Sect. RC found at the end of the index. Sect. RC provides prices (per 100 feet) for Type SO, W and G extra flexible neoprene jacketed cable, rated 600 volt, for reeling service. Listed price includes the cost of installation on the reel. Cable Outlets. Most Reelites priced in the index are furnished with either guide rails or a four-roller cable outlet as defined on the feature page for each specific product. Each feature page also lists other optional
Sample 1Sample 2Sample 3
Lighting Products. A complete and comprehensive offering of lighting products such as lamps, ballasts, fixtures, controls, LEDs, athletic field lighting, highway lighting and all other related lighting products offered by Proposer.
Sample 1Sample 2
Lighting Products. Aqua Power has developed cutting edge lighting products using their RMAF system technology. The products can be broken into four categories: Lanterns, Flashlights, Speciality Lighting Products and Power Bars.
Sample 1
Lighting Products. Emergency Lighting;  In accordance with the National Fire Code of Canada and part of this contract, the contractor is responsible to verify all emergency lights, supply and replace burnt bulbs as required and report to the Museum any fixture that does not illuminate after the bulb replacement. General Purpose Lighting;  The Contractor shall include for the supply and installation of all interior light bulbs installed at a height of 3.3m (10 feet) or less, and the following tasks;  Supply and replace all flickering and/or burnt-out tubes and bulbs, with identical types,  Safely Clean tubes, bulbs, lenses and the interior and exterior of light fixtures, while replacing tubes and bulbs,  Supply and safely use all equipment necessary when replacing tubes and bulbs,  The contractor is not responsible for replacing and supplying tubes or bulbs in units which form an integral part of the furniture, office equipment, specialized electrical apparatus and elevator cabs,  The contractor shall supply and replace all acrylic lenses broken when replacing or cleaning bulbs and tubes,  The Contractor is responsible for fixture re-xxxxxxx and washing in all areas included within the contract The Museum will supply bulbs for all rooms requiring shatter-proof and/or ultraviolet filtering cover guards.
Sample 1
Lighting Products. Power Bars The Aqupa Power Bars are magnesium rods that provide the power source for the Lanterns and Flashlights. The magnesium rod is easily replaced and range in size from 130 x 25 mm to 102 x 30 mm.
Sample 1

Related to Lighting Products

  • Existing Products Except as set forth below, Contractor shall retain all rights, title and interest in Existing Products.

  • Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Competing Products The provisions of Section 21 are set forth on attached Exhibit H and are incorporated in this Section 21 by this reference.

  • Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.

  • RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time. (b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.

  • New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.

  • Supply of Materials The following materials will be supplied by the department Name of Materials Rate. Place of delivery 1.

  • Additional Products Upon satisfying the minimum order requirements above, Enrolled Affiliate may order Additional Products.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!